2016 Buick Envision Technical Service Bulletins

1,035 technical service bulletins (TSBs) are on record for the 2016 Buick Envision. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10190309Oct 1, 2017Equipment, Body and structure, Latches, locks and linkages. Condition Information on Outside Door Handle or Lock Cylinder Cover Loose, Falling Off Some customers may comment on any of the following: • Outside door handle loose. • Outside door handle pulls out of door. • Outside door handle fell off. • Outside door handle lock cylinder cover fell off. • Outside door handle lock cylinder cover loose. Cause The cause of the condition may be either of the following issues: 1.
• 10190243Oct 1, 2017Equipment. Rear Air Conditioning Inoperative, Blowing Warm Air Condition Some customers may comment that the 2nd row / rear HVAC blows warm air when air conditioning is commanded Cause - This condition may be caused by the auxiliary temperature valve, internal to the A/C distributor case, being fractured. Note: The technician may find the pivot for the temperature valve has pulled away from the actuator motor (2).
• 10157041Sep 28, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical…
• 10157027Sep 21, 2017Equipment, Back-over prevention (rear camera), Brakes, Lane departure. This Preliminary Information communication provides information to the technician the steps to diagnose and repair vehicles that may have an Object Detection System Message Diagnostic Trouble Codes U0075, U026A, U026B, U026C, U0265, U0268, and/or U0269 stored in the active safety module. Technician should inspect his Multiple Diagnostic Interface cable for damage.
• 10159570Sep 20, 2017Electrical system. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
• 10157020Sep 20, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10157018Sep 20, 2017Fuel system, Tires, Equipment, Electrical system. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
• 10159613Sep 19, 2017Electrical system. This informational bulletin provides information for programming the low speed LAN module due to the mirrors memory position reverse tilt position is inoperative.
• 10159575Sep 14, 2017Electrical system. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
• 10159572Sep 14, 2017Equipment. This informational bulletin explains the importance of maintaining the vehicle.
• 10159609Sep 13, 2017Equipment. This technical bulletin provides a procedure to replace the AC distributor case if the rear air blows warm when the AC is selected.
• 10159569Sep 12, 2017Engine cooling, Equipment. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 10156999Sep 11, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10156990Sep 6, 2017Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
• 10159574Sep 5, 2017Engine. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
• 10140293Aug 31, 2017Engine cooling. This informational bulletin provides information on Intake Manifold Inspection/Replacement After Severe Internal Engine Damage.
• 10137754Aug 31, 2017Equipment. This preliminary information advises the technician to inspect for a broken temperature door versus replacing the temperature actuator and resulting in a misdiagnosis.
• 10140298Aug 30, 2017Equipment. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
• 10137747Aug 29, 2017Equipment. This Preliminary Information communication provides information to the technician that when scanning a vehicle for Diagnostic Trouble Codes, may find a temporary loss of Human Machine Interface communication with Global Diagnostic System 2. Technician should not replace the Human Machine Interface for this concern, power cycling of the Human Machine Interface fuse should restore communication.
• 10140406Aug 23, 2017Body and structure, Equipment. Thins informational bulletin provides information on Paint-less Dent Repair Process.
• 10137727Aug 21, 2017Engine. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10137705Aug 9, 2017Equipment. This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
• 10140297Aug 2, 2017Equipment. This warranty administration bulletin provide policy information on warranty and policy exchange program for electronic products for U.S. and Canada dealers only.
• 10137697Aug 2, 2017Electrical system. This Preliminary Information communication provides information to the technician that when scanning a vehicle for Diagnostic Trouble Codes, may find a temporary loss of Human Machine Interface communication with Global Diagnostic System 2. Technician should not replace the Human Machine Interface for this concern, power cycling of the Human Machine Interface fuse should restore communication.
• 10126081Jul 31, 2017Equipment. This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
• 10126113Jul 25, 2017Electrical system. This informational bulletin provides information on Information on How to Prevent Inadvertent Vehicle Starting from Key Fob or OnStar Mobile Application and where to locate the information for future use.
• 10126068Jul 25, 2017Electrical system. This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
• 10126111Jul 24, 2017Electrical system. This informational bulletin provides to the tech the new version of SPS that will prompt warnings when trying to reprogram modules that have been already reprogrammed.
• 10126085Jul 21, 2017Body and structure. This informational bulletin provides information for dealers/technicians on addressing a customer concern of the appearance of a liftgate actuator leak.
• 10108645Jul 19, 2017Tires. This informational bulletin provides information on the temporary tire flat spotting condition.
• 10114082Jul 18, 2017Fuel system. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane…
• 10108627Jul 18, 2017Engine, Equipment. This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
• 10108626Jul 18, 2017Electrical system. This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
• 10108625Jul 18, 2017Engine, Equipment. This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
• 10108623Jul 18, 2017Equipment, Engine. This 2016 Buick Envision New Model Features informational Bulletin provides various general information topics to the Service, Parts and Sales Personnel in order to familiarize them with the vehicle. It has been revised to create 16-NA-149 Version 2 by adding a section for Engine — STOP/START information — RPO KL9, with a graphic and system operation information. Also to remove the Attention statement and replace…
• 10108618Jul 18, 2017Tires. This informational bulletin provides information that the TPM sensors must always be relearned when accessory wheels are installed on the vehicle.
• 10108600Jul 17, 2017Equipment, Electrical system. This preliminary informational bulletin provides information regarding the need to relearn the auto/start and stop feature on vehicles equipped after a repair has been completed on the vehicle.
• 10114072Jul 13, 2017Back-over prevention (rear camera), Equipment. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the…
• 10114071Jul 12, 2017Fuel system. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane…
• 10114063Jul 6, 2017Lane departure, Electrical system, Steering. This Preliminary Information communicates to thetechnician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the…
• 10118290Jun 30, 2017Equipment. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane…
• 10118265Jun 15, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicles that the radio will not retain the previous settings and will go to the Home Icon screen when the vehicle is restarted. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
• 10118256Jun 12, 2017Electrical system. This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System.
• 10118233Jun 2, 2017Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
• 10137665May 23, 2017Equipment. This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
• 10137607May 23, 2017Electrical system. This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system.
• 10137600May 22, 2017Wheels. This informational bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
• 10137680May 19, 2017Brakes. This preliminary informational bulletin provides information regarding the normal characteristic of instrument panel red brake light intermittently comes on.
• 10137601May 17, 2017Engine. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on engine surfaces.
• 10137605May 15, 2017Equipment. This informational bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.

← All problems reported for the 2016 Buick Envision