2018 Buick Envision Technical Service Bulletins

855 technical service bulletins (TSBs) are on record for the 2018 Buick Envision. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10161934May 15, 2019Engine cooling. This technical bulletin provides a procedure to replace the charge air cooler due to moisture getting inside of it and causing a malfunction indicator lamp illuminated with DTC P0300 and/or P0299/P2227.
• 10161906May 9, 2019Tires. This informational bulletin provides information for dealers/technicians on Tire Radial Force Variation (RFV).
• 10161929May 8, 2019Equipment. This warranty administration bulletin provide policy information to cover GM's policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
• 10160987May 7, 2019Engine. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
• 10160983May 6, 2019Equipment, Engine. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10161907May 2, 2019Equipment. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10160420Apr 29, 2019Tires. This warranty administration bulletin provide policy information on tires are not meeting tread depth expectations, or wearing out (reaching 2/32”) too quickly.
• 10160086Apr 26, 2019Equipment, Body and structure. This informational bulletin provides information and operating tips for the hands free lift gate.
• 10160690Apr 24, 2019Fuel system, Engine. This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer of a repair kit they received that will prevent this issue when installed correctly.
• 10160682Apr 23, 2019Visibility (wipers, defrost, mirrors). This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10160133Apr 2, 2019Equipment, Transmission and drivetrain. This informational bulletin provides normal operating characteristics and diagnostic information on Manual transmissions.
• 10160405Apr 1, 2019Electrical system. This Preliminary information communicates that a customer may complain of the Driver Information Center(DIC) intermittently flickering or going blank. It may be noted that this only seems to occur when playing songs via IHeart or Pandora. This may be caused by a software concern in the Instrument panel Cluster(IPC). The dealer is instructed that engineering is working on a resolution to this concern and when it is…
• 10160135Apr 1, 2019Equipment. This informational bulletin provides information on proper use of floor mats.
• 10160132Apr 1, 2019Electrical system. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
• 10156957Mar 29, 2019Equipment. This preliminary information is created to advise the technician that may have this code present after service and how to perform the relearn.
• 10158819Mar 28, 2019Engine. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software.
• 10158864Mar 26, 2019Equipment. This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
• 10158859Mar 25, 2019Equipment. This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
• 10158855Mar 25, 2019Equipment. This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
• 10158867Mar 22, 2019Equipment. This informational bulletin provides information on proper use of floor mats.
• 10158861Mar 22, 2019Equipment, Electrical system. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
• 10158857Mar 22, 2019Equipment. This informational bulletin provides information for the dealer technician to gather as much information to help aid Engineers by completely filling out requested reports.
• 10158870Mar 20, 2019Engine cooling, Equipment. This engineering information PI ends the need for information from the field on a oil leak from the oil pan.
• 10158810Mar 19, 2019Engine cooling. This technical bulletin provides a procedure to replace the charge air cooler due to moisture getting inside of it and causing a malfunction indicator lamp illuminated with DTC P0300 and/or P0299/P2227.
• 10156939Mar 19, 2019Equipment. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10158871Mar 15, 2019Equipment, Engine cooling. This engineering information PI ends the need for information from the field on a oil leak from the oil pan.
• 10158863Mar 15, 2019Equipment, Electrical system. This bulletin provides information for electrical ground repairs using new replacement fasteners with "conductive finish".
• 10158862Mar 14, 2019Electrical system, Equipment. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
• 10156929Mar 13, 2019Equipment. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10158865Mar 11, 2019Electrical system, Equipment. This bulletin provides information on the Transport Mode On Message Being Displayed in the Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the Transport Mode message ON and OFF.
• 10156916Mar 8, 2019Equipment. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10158858Mar 7, 2019Fuel system, Equipment. This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
• 10158838Mar 1, 2019Engine. This informational bulletin provides information on a normal engine operating condition for faster emission warm up time.
• 10154638Feb 28, 2019Transmission and drivetrain. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
• 10155073Feb 26, 2019Equipment. This informational bulletin provides the dealer with information on what to do when requesting a new key code for the customer.
• 10154538Feb 19, 2019Engine cooling. This technical bulletin provides a procedure to replace the charge air cooler due to moisture getting inside of it and causing a malfunction indicator lamp illuminated with DTC P0300 and/or P0299/P2227.
• 10154306Feb 19, 2019Engine cooling. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
• 10154299Feb 18, 2019Engine cooling. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
• 10155068Feb 15, 2019Tires. This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (in Canada, the Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
• 10154641Feb 15, 2019Equipment. This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
• 10158772Feb 14, 2019Engine cooling, Engine. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software.
• 10158160Feb 14, 2019Electrical system, Fuel system, Engine. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software.
• 10156896Feb 14, 2019Engine cooling, Engine, Fuel system. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software.
• 10155584Feb 14, 2019Engine cooling. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software.
• 10154631Feb 13, 2019Engine cooling. This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system.
• 10155072Feb 8, 2019Electrical system. This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the Transport Mode message On and Off.
• 10155071Feb 8, 2019Equipment. This warranty nonadministrative bulletin provides information on the proper use of the labor operation 0600014.
• 10155070Feb 5, 2019Equipment. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
• 10154265Feb 4, 2019Engine cooling. This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted.
• 10154628Jan 31, 2019Equipment. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).

← All problems reported for the 2018 Buick Envision