2012 Buick Lacrosse Technical Service Bulletins

1,830 technical service bulletins (TSBs) are on record for the 2012 Buick Lacrosse. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10158838Mar 1, 2019Engine. This informational bulletin provides information on a normal engine operating condition for faster emission warm up time.
• 10154638Feb 28, 2019Transmission and drivetrain. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
• 10155073Feb 26, 2019Equipment. This informational bulletin provides the dealer with information on what to do when requesting a new key code for the customer.
• 10154309Feb 19, 2019Fuel system. This PI offers diagnostic tips to a technician when diagnosing a possible fuel level sensor concern. The tech is advised to ohm test the sensor at the terminals located on top of the fuel module while performing a sweep test. If the test fails the technician is instructed to replace the sensor and then perform the sweep test again.
• 10154308Feb 19, 2019Equipment. This Preliminary Information communication provides information to the technician being unable to program fobs to the vehicle. Technician will need to ensure the key FOB is a new unit and has not been programmed to another vehicle previously.
• 10154306Feb 19, 2019Engine cooling. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
• 10154305Feb 19, 2019Engine cooling. This Preliminary information communicates the identification process for High Feature V6 camshafts in re-manufactured engines.
• 10154299Feb 18, 2019Engine cooling. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
• 10154641Feb 15, 2019Equipment. This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
• 10154297Feb 14, 2019Fuel system. This Preliminary information communicates to the dealer an issue where the vehicle's inspection and maintenance monitors along with diagnostic trouble codes may reset unprompted due to the installation of an aftermarket fuel pump control module.
• 10155074Feb 13, 2019Engine. This Bulletin Provides Information for Repairing Engine Front Cover Oil Leak, Sealing Surface Preparation and Applying RTV Sealant.
• 10155071Feb 8, 2019Equipment. This warranty nonadministrative bulletin provides information on the proper use of the labor operation 0600014.
• 10154291Feb 8, 2019Equipment. This Preliminary Information communication provides information to the technician about vehicles that have driver and passenger temperatures settings are displayed in Celsius or the outside ambient temperature is missing from the radio / Heater-Vent-Air Conditioning display. Technician will need to use a scan tool to check for Diagnostic Trouble Codes in the Instrument Panel Cluster.
• 10155070Feb 5, 2019Equipment. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
• 10154628Jan 31, 2019Equipment. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10154625Jan 31, 2019Equipment. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
• 10155055Jan 29, 2019Equipment. This informational bulletin provides a listing of the parts availability for coax repair procedures and what is needed to complete some repairs.
• 10155051Jan 23, 2019Wheels. This informational bulletin explains the wheel Road Force balancers and what they can do for customer concerns.
• 10154629Jan 18, 2019Electrical system. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
• 10154627Jan 14, 2019Equipment. This warranty administration bulletin provides policy information on required operating procedures.
• 10155010Dec 21, 2018Equipment. This warranty bulletin provides labor operation numbers for customer concerns Not duplicated (CCND).
• 10154607Dec 18, 2018Visibility (wipers, defrost, mirrors). This PI informs dealer that if the Sunroof glass is out of time, sunroof glass motor lost synchronization to refer to the data in GDS2 to verify the glass is in the correct position and if not to perform the Sunroof Motor/Actuator Initialization/Teach Process following Document ID: 3752319.
• 10154605Dec 17, 2018Suspension. This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center.
• 10154604Dec 17, 2018Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency…
• 10154975Dec 14, 2018Transmission and drivetrain, Equipment. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
• 10155014Dec 13, 2018Equipment. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10155009Dec 13, 2018Exterior lighting. This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
• 10154566Dec 6, 2018Engine cooling. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
• 10155012Dec 5, 2018Equipment, Seats. This informational bulletin provides information for information on passenger presence sensing system (PPS or PSS) concerns with custom upholstery, accessory seat heaters or other comfort enhancing devices.
• 10155011Dec 5, 2018Electrical system. This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
• 10155008Dec 5, 2018Tires. This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
• 10154552Dec 3, 2018Engine cooling. This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
• 10151876Nov 26, 2018Body and structure, Equipment. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found.
• 10151873Nov 26, 2018Fuel system, Electrical system. This PI offers diagnostic tips to a technician when diagnosing a possible fuel level sensor concern. The tech is advised to ohm test the sensor at the terminals located on top of the fuel module while performing a sweep test. If the test fails the technician is instructed to replace the sensor and then perform the sweep test again.
• 10151869Nov 21, 2018Equipment. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10151821Nov 6, 2018Engine. This Preliminary Information communication provides information to the technician about vehicles that have a ticking noise on cold start after sitting more than 6 hours. Technician will inspect the oil pump pick-up tube to block seal being compressed. It the seal is compressed replace the seal and retest.
• 10155101Nov 5, 2018Equipment. This bulletin provides information for use on a Product Assistance Claim (PAC), which is formally known as a Product Allegation Resolution (PAR) claim.
• 10155076Nov 2, 2018Visibility (wipers, defrost, mirrors), Equipment. This preliminary bulletin provides a procedure to replace the sunroof sunshade if it binds or doesn't retract properly.
• 10147401Oct 23, 2018Equipment. This Preliminary information communicates
• 10147376Oct 12, 2018Equipment. This Preliminary Information communication provides information to the technician being unable to program fobs to the vehicle. Technician will need to ensure the key FOB is a new unit and has not been programmed to another vehicle previously.
• 10147367Oct 10, 2018Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10147348Oct 3, 2018Fuel system. This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
• 10144476Aug 28, 2018Equipment. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10144454Aug 9, 2018Engine cooling, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon and may also have an oil or coolant leak. Technician may find coolant or oil in a spark plug tube. If the Spark Plug Tube is leaking and it is determined that the oil or coolant is not coming from a leak above the spark plug then replace the cylinder Head, spark plug and coil.
• 10144453Aug 9, 2018Engine, Engine cooling. This Preliminary Information communication provides information to the technician that Diagnostic Trouble Codes P0016, P0017, P0018, P0019, P0008 or P0009 may be set. Technician will need to inspect for loose timing chains or tensioners. If after following Service Information diagnostics the root cause is not found inspect the reluctor for the crankshaft sensor. If the reluctor has moved then replace crankshaft.
• 10144451Aug 8, 2018Engine. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10143778Jul 25, 2018Electrical system, Back-over prevention (rear camera). This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the…
• 10143762Jul 12, 2018Engine cooling. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have oil mixed in with the engine coolant. Technician will need to inspect the oil cooler if equipped for possible leaking into the cooling system through the radiator. If no issue found replace the engine as well as all rubber coolant hoses.
• 10143752Jul 3, 2018Visibility (wipers, defrost, mirrors). This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10143449Jun 20, 2018Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.

← All problems reported for the 2012 Buick Lacrosse