2004 Buick Rendezvous Suspension Problems

“Wheel bearing on the 2004 Buick Rendezvous last year we replaced wheel bearing on front wheels now less than year later we are having problem some day this is going to kill someone replacing bearing is not work make Buick redesign wheel bearing thank you keith lorenz.”

“I was driving the vehicle to an appointment and all of a sudden it thumbed when I moved from the light taking off not like it was shifting but as something was knocked in, then the lower light I turn on in the truck stopped working, the interior dash lights as well stopped on the 11 of march about 6 pm I was heading back in from out of town had to position my cell phone so I could see what speed I was going, the turning to the right knocks like something is about to fall off, and the to top it off the wiper from the back window leaks in the inside when I try to clean with fluid, the seat…”

“Rear differential will not stop groaning on any turn. Rear differential now has to be replaced and the car only has 80,000 miles on it. We also have to replace the rack and pinion. The total costs associated with both these will be well over $5,000. It is effecting the turning process when I need to turn the car. Also have a rack and pinion failure. The steering column completely locked up and the towing company had to put oil all over where the car was parked and slide it up to the cable to tow the car. Entire steering mechanism replaced but now the rack and pinion has to be replaced. …”

“Upon arriving at my destination and after i put my in park i was UNABLE to turn my engine off because the ignition was stuck in that position. I ultimately had no choice but to unhook the battery cables along with disconnecting the alternator to get my engine to turn off. Prior to this incident occasionally upon starting my car the ignition would not disengage immediately upon the engine turning over which ultimately resulted in having to replace the starter on this vehicle. I am a single parent and only have one vehicle so this is a major issue for my family. …”

“My family and I were driving down the road when the wheel broke off of the control arm, ball joint assembly. This made my wheel look bent inward and undriveable.”