2017 Cadillac Escalade ESV Technical Service Bulletins

1,239 technical service bulletins (TSBs) are on record for the 2017 Cadillac Escalade ESV. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10222661Sep 8, 2022Equipment, Electrical system. This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with RPO ATH and AVJ.
• 10222670Sep 7, 2022Transmission and drivetrain. This informational bulletin advises the technician of possibly installing the incorrect 1-2-7-8-R clutch fluid passage seal and which seal should be used with measurements of the seal.
• 10220319Sep 1, 2022Transmission and drivetrain. This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
• 10220314Sep 1, 2022Transmission and drivetrain, Engine cooling. This technical bulletin provides information on a possible bolt and guide pin that may be missing from the control valve which will need to be installed to correct the repair.
• 10220308Sep 1, 2022Equipment. This service bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
• 10219284Aug 25, 2022Equipment. This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
• 10219278Aug 22, 2022Equipment. This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
• 10219266Aug 15, 2022Engine cooling. This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
• 10218873Aug 10, 2022Fuel system, Engine cooling. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
• 10217043Jul 22, 2022Equipment. This bulletin provides information on Warranty Administration – Required Operating Procedures - 8 Points (U.S. Only).
• 10217048Jul 18, 2022Equipment. This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
• 10215655Jun 28, 2022Equipment. This warranty admin bulletin covers information on Essential Tools that include Consumable Parts.
• 10215643Jun 27, 2022Equipment, Engine cooling, Visibility (wipers, defrost, mirrors). This service bulletin provides information to dealership personnel on a new refrigerant (R1234yf) for A/C service.
• 10215628Jun 24, 2022Equipment. This service bulletin provides information for replacement parts traceability (RPT) process to aid in tracking part replacements.
• 10215626Jun 21, 2022Equipment. This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
• 10216366Jun 16, 2022Engine. This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time.
• 10214869Jun 15, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10214501Jun 6, 2022Wheels. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
• 10213700Jun 1, 2022Equipment, Steering. This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
• 10213252May 19, 2022Equipment. This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires.
• 10213007May 18, 2022Transmission and drivetrain. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
• 10213036May 16, 2022Fuel system, Engine cooling, Brakes, Wheels. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
• 10213022May 16, 2022Equipment. This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
• 10212908May 12, 2022Engine cooling. This informational bulletin explains the normal noises an engine may make when the ambient temperature outside is cold or the vehicle has sat for a few hours.
• 10212910May 11, 2022Wheels. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
• 10211658May 2, 2022Engine, Equipment. This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
• 10210849Apr 20, 2022Engine cooling. This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer concerns of engine related shudder.
• 10210841Apr 20, 2022Equipment. This service bulletin provides information for replacement parts traceability (RPT) process to aid in tracking part replacements.
• 10211769Apr 19, 2022Electrical system. This Preliminary Information communication provides information to the technician with the correct way to remove the front shock electrical connector terminals. Technician will need to slightly bend the end of the J-38125-12A release tool. There is a purple Terminal Position Assurance that will align itself in the release position when the release tool is inserted into the release hole.
• 10211765Apr 13, 2022Electrical system. This Preliminary Information communication provides information to the technician with the correct way to remove the front shock electrical connector terminals. Technician will need to slightly bend the end of the J-38125-12A release tool. There is a purple Terminal Position Assurance that will align itself in the release position when the release tool is inserted into the release hole.
• 10210543Apr 13, 2022Equipment. This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10210441Apr 7, 2022Body and structure. This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
• 10210194Apr 5, 2022Other or unknown. This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10209980Mar 31, 2022Engine cooling. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10209977Mar 30, 2022Equipment. This service bulletin provides information for replacement parts traceability (RPT) process to aid in tracking part replacements.
• 10209953Mar 29, 2022Engine cooling. This service bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
• 10209743Mar 25, 2022Wheels, Equipment. This bulletin updates the position of General Motors on refinishing fully color painted aluminum wheels with base paint. GM has established a new process for the way that refinishing under GM Warranty will be handled (U.S. ONLY).
• 10209921Mar 22, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10209741Mar 22, 2022Fuel system, Engine cooling. This service bulletin provides the technician with additional information on fuels, fuel additives and fuel management.
• 10209734Mar 22, 2022Equipment, Fuel system. This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 10209138Mar 10, 2022Electrical system. This technical bulletin provides a procedure for testing the battery cables for voltage drop, Checking for a bad ground at g218, Inspecting for a short at the starter B+ to shield and testing for a faulty battery.
• 10210321Mar 7, 2022Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10210319Mar 7, 2022Equipment. This Preliminary information communicates information on how dealers can contact the supplier for Associated Accessories offered through GM.
• 10209097Mar 3, 2022Transmission and drivetrain, Brakes, Electrical system. This service bulletin informs the technician to inspect for a possible electrical concern at the ECM X2 electrical connector to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated - DTC P0333 Set.
• 10209122Mar 2, 2022Engine cooling. Information bulletin explains a possible coolant leak coming from the cylinder head bolt areas.
• 10208988Feb 18, 2022Electrical system. This Preliminary Information communication provides information to the technician about how to diagnosis a battery draw that may be caused by a module back feeding voltage in the ignition relay circuits making the vehicle think it is still awake.
• 10213766Jan 28, 2022Equipment. This Warranty Administration bulletin provides information on Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program Information.
• 10213762Jan 28, 2022Equipment. This service bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10212633Jan 28, 2022Equipment. This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only).
• 10213768Jan 27, 2022Equipment, Body and structure. This preliminary informational bulletin provides information on Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center.

← All problems reported for the 2017 Cadillac Escalade ESV