2010 Cadillac Escalade Technical Service Bulletins

1,482 technical service bulletins (TSBs) are on record for the 2010 Cadillac Escalade. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10137471Nov 26, 2012Wheels. This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
• 10126191Nov 26, 2012Transmission and drivetrain. This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
• 10112600Nov 26, 2012Transmission and drivetrain. This Preliminary Information communication provides information to the technician with the axel setup information from American Axle Manufacturing. Technician should be advised that the maximum pinion shim to be used or stacked behind the pinion is 0.050?, and the minimum pinion shim is 0.020? for an 8.6 axle. The range for available pinion depth shims for the 10.5? axle is 0.006? to 0.024?. When setting the…
• 10112597Nov 21, 2012Fuel system. This Preliminary Information communication provides information to the technician about vehicles that have a buzz or rattle type noise during light acceleration around 1200-2000 Revolutions per minute. Technician will need to reposition the fuel line and bracket down away from the floor pan.
• 10138211Nov 20, 2012Equipment. This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.
• 10137469Nov 20, 2012Equipment. This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.
• 10126192Nov 20, 2012Equipment. This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.
• 10112581Nov 16, 2012Electrical system. This Preliminary Information communication provides information to the technician about vehicles that may have a no crank condition after the vehicle has had very low accessory battery voltage or a dead battery condition. Technician may find Diagnostic Trouble Code P0C76 set. Technician should be advised that anytime a battery charger or booster pack is connected to the 12 volt battery, the ignition key should…
• 10112580Nov 16, 2012Brakes. This Preliminary Information communication advises the technician that the Electronic Brake Control Module and Brake Pressure Modulator Valve for the 2-Mode Hybrid Utilities and Trucks will be placed on a parts restriction through the General Motors Technical Assistance Center. Dealer will need to contact for further assistance.
• 10112578Nov 15, 2012Brakes, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a lack of brake assist after disconnecting the battery or after the 12 volts battery has run low on voltage. The Antilock Braking System Malfunction Indicator Lamp may also be on. Technician may find Diagnostic Trouble Code C121D sym 00 or C056D sym 00 set in the Electronic Brake Control Module.
• 10112577Nov 15, 2012Brakes, Equipment. This Preliminary Information communication provides information to the technician about Electronic Brake Control Module relearn procedure is required anytime the Electronic Brake Control Module is replaced or has been Service Programming System reprogrammed.
• 10112573Nov 15, 2012Body and structure, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that the power lift gate Regular Production Option Code (E61 or TB5) is inoperative. Technician will find Diagnostic Trouble Code B153A set in the power lift gate control module. Technician will need to perform these steps. 1. Disconnect the connector at the Lift gate Latch Assembly. 2. Install a 3 ampere fused jumper…
• 10138201Nov 13, 2012Equipment. This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.
• 10137459Nov 13, 2012Equipment. This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.
• 10137458Nov 13, 2012Equipment. This informational bulletin provides information for requesting a new key code for customers with lost or stolen keys
• 10126197Nov 13, 2012Equipment. This informational bulletin provides information for requesting a new key code for customers with lost or stolen keys
• 10126196Nov 13, 2012Equipment. This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.
• 10138200Nov 12, 2012Equipment, Electrical system, Body and structure. This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
• 10138197Nov 12, 2012Brakes, Engine, Equipment, Transmission and drivetrain. This informational bulletin provides a revision for 01-00-89-010I to add the 2013 model year.
• 10137457Nov 12, 2012Equipment. This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
• 10137454Nov 12, 2012Equipment. This informational bulletin provides a revision for 01-00-89-010I to add the 2013 model year.
• 10126200Nov 12, 2012Equipment. This informational bulletin provides a single point reference and strategy document to aid in reducing customer comebacks, and the possibility of buyback situations by outlining specific guidelines, strategy and forms that will assist with this goal, by identifying, clarifying and documenting customer concerns accurately at each service visit.
• 10126198Nov 12, 2012Equipment. This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
• 10138196Nov 9, 2012Equipment, Electrical system. This informational bulletin provides information on part restriction and ordering process information for onstar vehicle communication interface modules.
• 10137453Nov 9, 2012Other or unknown, Equipment, Electrical system. This informational bulletin provides information on part restriction and ordering process information for onstar vehicle communication interface modules.
• 10112560Nov 9, 2012Brakes. This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their…
• 10138191Nov 8, 2012Visibility (wipers, defrost, mirrors), Equipment. This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
• 10137448Nov 8, 2012Equipment. This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
• 10126203Nov 8, 2012Equipment. This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
• 10126202Nov 8, 2012Electrical system. This technical bulletin provides a procedure for replacing the throttle position sensor cover for concerns regarding a indicator lamp illuminated reduced power message displayed and DTC P2135 set.
• 10112558Nov 8, 2012Electrical system. This Preliminary Information communication provides information to the technician with additional vehicle speed sensor diagnostic information. Technician may encounter multiple issues when diagnosing a Vehicle Speed Sensor. Technician will find it difficult to follow the speed signal path between the components. To test connect the Fluke meter leads between circuits 821 and 822 and set the meter to Alternating…
• 10138189Nov 7, 2012Wheels, Tires. This informational bulletin provides information on how to properly mount and balance wheels and tires on heavy duty truck models only
• 10137446Nov 7, 2012Wheels, Tires. This informational bulletin provides information on how to properly mount and balance wheels and tires on heavy duty truck models only
• 10126167Nov 7, 2012Equipment. This preliminary informational bulletin provides a procedure to replace the first junction block terminal and other terminals to correct a condition of poor HVAC performance.
• 10112551Nov 6, 2012Brakes. This Preliminary Information communication provides information to the technician about vehicles that have an Antilock Braking System lamp followed by a Service Stability message in the Drivers Information Center. Technician my find Diagnostic Trouble Code C0710 set in the Electronic Brake Control Module. Technician may or may not find Diagnostic Trouble Code C0455. Technician will need to ensure the steering wheel…
• 10112548Nov 6, 2012Equipment. This Preliminary Information communication provides information to the technician about vehicles that only have audio from the front left speaker after replacing the amplifier. Technician should program the amplifier using Tis-2-Web using Service Programming System with the latest calibrations.
• 10112547Nov 6, 2012Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a front passenger flooring wet, water sloshing noise, and/or mist from the dash vents. Technician will need to rotate the drain hose to clear the heat shield.
• 10112544Nov 6, 2012Brakes, Steering. This Preliminary Information communication provides information to the technician about vehicles that may have a power steering pump whine noise. Technician will need to flush and refill the power steering system with Lucas Power Steering Fluid with Conditioners. Technician will replace the power steering pump with the latest design if the fluid is not available.
• 10112541Nov 5, 2012Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a buzz or rattle type noise during light acceleration around 1200-2000 Revolutions per minute. Technician will need to reposition the fuel line and bracket down away from the floor pan.
• 10112540Nov 5, 2012Body and structure. This Preliminary Information communication provides information to the technician about vehicles that the rear power lift-gate is inoperative with the inside switch and the outside door handle. Dealer should advise the customer to press the unlock button on the door panel and the lift-gate will work.
• 10112536Nov 2, 2012Air bags. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B0081 in the Sensing and Diagnostic Module and Passenger Presence Sensor modules. Technician should inspect the Sensing and Diagnostic Module and Passenger Presence Sensor powers, grounds, and communication circuits at all in line connectors for fully seated, backed out terminals, and…
• 10253610Nov 1, 2012Visibility (wipers, defrost, mirrors). Diagnosis and Repair HVAC Blower Function.
• 10245761Nov 1, 2012Electrical system, Equipment. Requesting a New Key Code for Customer with Lost or Stolen Keys
• 10245749Nov 1, 2012Exterior lighting, Transmission and drivetrain. Diagnosis and Repair - Malfunction Indicator Lamp (MIL) Illuminated, Reduced Engine Power Message Displayed, DTC P2135 Set
• 10112529Nov 1, 2012Equipment. This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle.
• 10112528Nov 1, 2012Electrical system. This Preliminary Information communication provides information to the technician about vehicles that during battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system. Technician should understand the power cycles of the various OnStar systems. All Generation 6, 7, 8, and 9 systems are powered up continuously for 48 hours from ignition…
• 10043892Nov 1, 2012Visibility (wipers, defrost, mirrors). Gm: diagnose and repair hvac blower function. May not be any air flow from the hvac vents. One possible of this condition may be the contacts in the hvac junction block(s) located at the right side of the instrumental panel. *js updated 1/24/13.
• 10112526Oct 31, 2012Brakes, Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a "Service Stability Message" appears on the Drivers Information Center. Technician will find Diagnostic Trouble Code C0561 set in the Electronic Brake Control Module. Technician will need to address any other Diagnostic Trouble Codes that are set in the vehicle first before working on Diagnostic Trouble Code…
• 10112519Oct 29, 2012Suspension, Wheels. This Preliminary Information communication provides information to the technician about vehicles that have grease leaking from front hub bearings. Technician should not replace the bearing for grease purge. Technician should be advised to not clean the purged grease from the area immediately on or adjacent to the seals because this grease provides additional protection.
• 10089661Oct 25, 2012Equipment, Engine. 12138 - customer satisfaction program. Normal engine vibration while in active fuel management (afm) mode may cause the transmission dipstick tube to fatigue and fracture. If this occurs, it could cause a tick or rattle noise from the front of the vehicle. Dealers are to inspect the transmission dipstick tube for a fracture and replace it if necessary. If no fracture is found, dealers are to install a foam sleeve…

← All problems reported for the 2010 Cadillac Escalade