2022 Cadillac Escalade Technical Service Bulletins

995 technical service bulletins (TSBs) are on record for the 2022 Cadillac Escalade. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10222778Sep 14, 2022Engine cooling, Fuel system. This informational bulletin provides information on Diesel Exhaust Fluid (DEF) and the proper use of the DEF system.
• 10222772Sep 14, 2022Engine cooling. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
• 10222765Sep 14, 2022Fuel system, Engine cooling. This service bulletin provides the technician with additional information on fuels, fuel additives and fuel management.
• 10222733Sep 14, 2022Equipment. This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10222739Sep 13, 2022Engine cooling, Fuel system. This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 10222736Sep 13, 2022Fuel system. This service bulletin provides information on availability of Diesel Fuel additives.
• 10222734Sep 13, 2022Engine cooling. This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 10222732Sep 13, 2022Engine cooling. This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 10222782Sep 12, 2022Fuel system, Engine cooling. This informational bulletin explains why more DEF is being used in diesel engines due to new emission standards.
• 10222781Sep 12, 2022Engine cooling, Fuel system. This informational bulletin explains how to identify possible DEF contamination.
• 10222664Sep 9, 2022Engine cooling. This Informational bulletin advises the technician of a possible oil leak at the front cover and how to diagnose it to verify if it is coming from the seal or not.
• 10222660Sep 9, 2022Engine cooling. This informational bulletin provides a way for the technician to identify if the ECM has been modified.
• 10222658Sep 9, 2022Fuel system. This technical bulletin provides a procedure to flush the cooler lines to validate if there is excessive debris in the fuel system caused by a failed part.
• 10222650Sep 9, 2022Engine cooling. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
• 10222649Sep 9, 2022Equipment. This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
• 10222205Sep 9, 2022Engine cooling. This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
• 10222661Sep 8, 2022Equipment, Electrical system. This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with RPO ATH and AVJ.
• 10222672Sep 6, 2022Body and structure, Other or unknown, Equipment. This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards on the articulating running boards are inoperable.
• 10222668Sep 6, 2022Transmission and drivetrain. This informational bulletin advises the tech to check if the trans cooler lines are twisted which may cause the customers concern.
• 10220317Sep 2, 2022Body and structure, Latches, locks and linkages. This technical bulletin provides the procedure to align the right rear door to correct the condition of Right Rear Door Alignment.
• 10220319Sep 1, 2022Transmission and drivetrain. This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
• 10220314Sep 1, 2022Transmission and drivetrain, Engine cooling. This technical bulletin provides information on a possible bolt and guide pin that may be missing from the control valve which will need to be installed to correct the repair.
• 10220308Sep 1, 2022Equipment. This service bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
• 10219389Aug 30, 2022Equipment. This service bulletin provides information for dealers on Using EL-52545 When Diagnosing PEPs Transmitter Key Fobs (North America ONLY).
• 10219284Aug 25, 2022Equipment. This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
• 10219278Aug 22, 2022Equipment. This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
• 10217937Aug 19, 2022Equipment. UPDATE: Initial Lifting of Stop Delivery Order for N222379650 Hood Insulator Build Shy
• 10219266Aug 15, 2022Engine cooling. This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
• 10218891Aug 12, 2022Engine cooling. This bulletin provides diagnostic information when checking the exhaust system for leaks.
• 10218873Aug 10, 2022Fuel system, Engine cooling. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
• 10218885Aug 8, 2022Body and structure. This informational bulletin provides information for dealers/technicians on visible gap at hem flange where front door skin wraps around and meets door shell.
• 10217930Aug 4, 2022Body and structure. This engineering information (EI) closure ends the need for further information from the field in regards to having assist step insert loose, falling off and/or warped.
• 10217923Aug 1, 2022Engine cooling, Fuel system. This technical bulletin provides a procedure to program the Reductant Control Module and Setup and Perform the Reductant Fluid Tank Level Reset.
• 10217856Aug 1, 2022Electrical system, Engine cooling. This technical bulletin provides a procedure to replace the fuel injector and the wiring harness to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated with DTC P0201, P0202, P0203, P0204, P0205, P0206 and/or P0216 Set.
• 10217793Jul 29, 2022Transmission and drivetrain. This Preliminary information communicates to the dealer technician that if a customer comments that their vehicle equipped with a 6L80, 6L90, 8L90, 10L80, or 10L1000 transmission has a harsh shift, shudder, stall or high transmission fluid temperature concern they should inspect for a twisted transmission cooler line. Technicians are instructed to disconnect the cooler line and untwist it then reconnect the cooler…
• 10217107Jul 25, 2022Equipment. This service bulletin provides information on Super Cruise Escalation Cancellation.
• 10217043Jul 22, 2022Equipment. This bulletin provides information on Warranty Administration – Required Operating Procedures - 8 Points (U.S. Only).
• 10217780Jul 21, 2022Engine cooling. This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P0308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
• 10217779Jul 21, 2022Engine cooling. This Preliminary information communicates information on correcting a rattle noise from the underbody exhaust heat shield.
• 10217069Jul 21, 2022Engine cooling. This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer concerns of engine related shudder.
• 10217067Jul 21, 2022Transmission and drivetrain, Fuel system, Engine cooling. This informational bulletin provides graphs to help identify possible issues that may cause shaking and shudders and what may be the cause of said issue.
• 10217060Jul 20, 2022Equipment. This service bulletin provides a repair procedure to correct a customer concern of a No Fob detected message on Driver Information Center (DIC) and/or No Crank / No Start condition.
• 10217048Jul 18, 2022Equipment. This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
• 10216049Jul 11, 2022Engine cooling. This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.
• 10217764Jul 5, 2022Equipment, Brakes, Electrical system. This Preliminary information communicates direction and examples when diagnosing multiple DTCs, one of which includes U**** Byte 71 DTC.
• 10217762Jul 1, 2022Tires, Equipment. This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
• 10215648Jun 30, 2022Electrical system, Engine cooling. This technical bulletin provides repair information to correct a customer concern of Malfunction Indicator Lamp Illuminated with DTC P06DD, P2B60, P26BB, P1098 Set.
• 10216377Jun 29, 2022Engine cooling. This Preliminary information communicates information on correcting a rattle noise from the underbody exhaust heat shield
• 10216376Jun 29, 2022Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have run hot and or has a tick noise. Technician should inspect the head gaskets to ensure are not installed backwards. Technician should replace the head gasket if they are found installed backwards.
• 10215658Jun 29, 2022Engine cooling. This engineering information (EI) closure ends the need for further information regarding oil leaking from the lower oil pan seal area.

← All problems reported for the 2022 Cadillac Escalade