2005 Chevrolet Aveo Technical Service Bulletins

505 technical service bulletins (TSBs) are on record for the 2005 Chevrolet Aveo. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10038344Jun 1, 2013Latches, locks and linkages. Gm: the front or rear door may not open from the inside or outside handle, the door will not unlock with any method. The probably cause an incorrect installation of a handle component. *rm updated on 7/26/2013. All 2014 and prior gm passenger cars and trucks.
• 10139080May 31, 2013Brakes, Equipment. This informational bulletin provides information for Disc Brake Warranty Service and Procedures.
• 10113119May 31, 2013Wheels, Suspension, Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have crunch noise from the front suspension over bumps when moving. Technician will need to loosen both the front and rear front control arm attachment bolts on one side. Technician will need to ensure that the front control arms supporting the vehicle weight, now the tech can re-torque the control arm bolts to…
• 10139078May 30, 2013Equipment, Transmission and drivetrain. This informational bulletin provides information for Automatic Transmission Oil Cooler Flow Test Essential Tool J-45096 TransFlow.
• 10139067May 23, 2013Equipment. This informational bulletin provides a revision for 11-00-89-005D to add additional Mandatory Minimum Tables and additional information concerning Policy decision making.
• 10139066May 23, 2013Engine cooling, Equipment. This informational bulletin provides information for Engine Squealing Type Noise on Start-up or Vibration Condition.
• 10139059May 21, 2013Equipment. This informational bulletin provides a revision for 02-08-98-002C to add the 2010-2013 model years and revise the Approved Refinish Materials booklet information.
• 10139057May 20, 2013Equipment. This informational bulletin provides a revision for 09-00-89-008 to add model years, update the Labor Operation Information and Transaction Submissions Procedure and general content updates.
• 10139052May 17, 2013Wheels, Equipment. This informational bulletin provides a revision for 07-03-10-015B to add the 2013-2014 model years and remove the Saab Warranty Information.
• 10139049May 16, 2013Equipment, Visibility (wipers, defrost, mirrors). This informational bulletin provides a revision for 05-08-48-001B to add 2010-2014 model years and update Labor Operation.
• 10113094May 15, 2013Equipment. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10139043May 14, 2013Equipment, Electrical system. This informational bulletin provides a revision for 13-00-89-004A to include updated information.
• 10139041May 14, 2013Equipment, Wheels. This informational bulletin provides a revision for 05-03-07-009E to add the 2014 model year and update the Labor Operations.
• 10139039May 13, 2013Equipment, Electrical system, Engine cooling. This informational bulletin provides a revision for 06-00-89-026J to add the 2014 model year and update the labor operations.
• 10139036May 10, 2013Equipment, Transmission and drivetrain. This informational bulletin provides a revision for 09-07-30-018C to add the 2014 model year and update the Labor Operation.
• 10139024May 6, 2013Equipment, Electrical system. This informational bulletin is a revision for 09-00-89-016B to add the 2014 model year and update the labor operation.
• 10113074May 2, 2013Electrical system, Equipment. This Preliminary Information communication provides information to the technician that after replacing the Instrument Panel Cluster the exchange center is unable to program the actual mileage on the odometer or the actual mileage is unknown. Dealer will need to follow dealer to the General Motors service policies and procedures manual section 3.2.4 odometer servicing.
• 10247715May 1, 2013Other or unknown, Equipment. Terminal Test Probe And Replacement Terminal.
• 10247060May 1, 2013Electrical system. Terminal Test Probe And Replacement Terminal.
• 10139033May 1, 2013Equipment. This informational bulletin is a revision for 03-06-03-004G to add the 2014 model year and update the Labor Operation.
• 10130652Apr 25, 2013Equipment. This technical bulletin provides Warranty Administration - New Labor Codes information.
• 10130627Apr 11, 2013Equipment. This technical bulletin provides a revision of 99-04-20-002G to add 2013-2014 model years.
• 10130619Apr 8, 2013Equipment. This technical bulletin provides a revision of 10-00-89-017Z to include updated information.
• 10134681Mar 26, 2013Equipment. This warranty administration bulletin provide policy information on clarification of use-dealer empowerment labor operations and customer enthusiasm.
• 10134652Mar 11, 2013Equipment. This informational bulletin provides information on fix it right for first time issues.
• 10134640Mar 4, 2013Wheels. This informational bulletin provides information on the appearance of chromed aluminum wheels due to chemical staining, pitting corrosion and/or spotted.
• 10112885Feb 26, 2013Equipment. This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
• 10112857Feb 13, 2013Electrical system. This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10133130Jan 16, 2013Body and structure. This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
• 10133125Jan 14, 2013Equipment. This informational bulletin provides information on a update for the Electronic Component Exchange Program (U.S. and Canada Only)
• 10112713Jan 14, 2013Transmission and drivetrain. This Preliminary Information communication provides information to the technician the automatic transmission operating characteristics for the 2004 through 2007 Aveo/Waves when the transmission's fluid temperature is below 15 Celsius (59 Fahrenheit). Technician should be advised that the 4th gear up-shifts are prevented. This is designed to provide improved vehicle emissions and heater performance.
• 10063471Jan 1, 2013Transmission and drivetrain. Summary to be provided on a future date.
• 10138541Dec 17, 2012Equipment. This warranty administration bulletin provides information on the Clarification of Use for Dealer Empowerment Labor Operations and Customer Enthusiasm
• 10113843Dec 17, 2012Equipment. This warranty administration bulletin provides information on the Clarification of Use for Dealer Empowerment Labor Operations and Customer Enthusiasm
• 10112664Dec 13, 2012Electrical system. This Preliminary Information communication provides information to the technician about vehicles may have a no power or no connect concern. Technician will find that the OnStar led is red and Diagnostic Trouble Code U1500 is set. Technician will need to replace the Vehicle Communication Interface Module if the Station Identification number falls in the ranges 14,000,000 - 16,000,000 or 22,000,000 - 23,200,000.
• 10112641Dec 12, 2012Engine cooling. This Preliminary Information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correct fluid to the proper testing center.
• 10113837Dec 7, 2012Equipment. This informational bulletin provides a list off all the issues revolving around new vehicles for a one stop place to find growing concerns around them.
• 10138220Nov 30, 2012Electrical system, Equipment. This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
• 10137478Nov 30, 2012Equipment. This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
• 10126163Nov 30, 2012Electrical system. This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
• 10112617Nov 30, 2012Latches, locks and linkages, Body and structure. This Preliminary Information communication provides information to the technician about vehicles that have the auto door locks are inoperative. Technician should be advised these models are not equipped with the auto door locks feature. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
• 10138217Nov 28, 2012Equipment. This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
• 10137475Nov 28, 2012Equipment. This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
• 10126171Nov 28, 2012Equipment. This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
• 10112607Nov 28, 2012Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10126192Nov 20, 2012Equipment. This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.
• 10126196Nov 13, 2012Equipment. This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.
• 10126200Nov 12, 2012Equipment. This informational bulletin provides a single point reference and strategy document to aid in reducing customer comebacks, and the possibility of buyback situations by outlining specific guidelines, strategy and forms that will assist with this goal, by identifying, clarifying and documenting customer concerns accurately at each service visit.
• 10126198Nov 12, 2012Equipment. This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
• 10112560Nov 9, 2012Brakes. This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their…

← All problems reported for the 2005 Chevrolet Aveo