2000 Chevrolet Blazer Technical Service Bulletins

249 technical service bulletins (TSBs) are on record for the 2000 Chevrolet Blazer. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10111964Feb 26, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have the OnStar system does not respond properly to some numbers and/or voice commands. Dealer should direct the customer to review the operational characteristics in the OnStar Users Guide.
• 10111927Feb 12, 2014Fuel system, Equipment, Brakes. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442…
• 10111894Feb 4, 2014Equipment. This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. The General Motors of Canada Customer Care Centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required USA regulatory standards necessary for importation…
• 10190932Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10190931Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10112013Jan 22, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
• 10111997Jan 16, 2014Equipment. This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
• 10190934Jan 1, 2014Body and structure, Equipment. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the…
• 10190933Jan 1, 2014Equipment, Body and structure. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the…
• 10112331Nov 1, 2013Engine cooling. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10113258Sep 19, 2013Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Supplemental Inflatable Restraint lamp, Service Vehicle Soon lamp on and/or radio locked, possibly after module replacement. Technician will need to check for an incorrect or non-existent VIN number in modules that require them. Technician should ensure that all modules that are replaced are programmed per…
• 10113227Sep 3, 2013Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.
• 10139019May 3, 2013Equipment, Engine cooling. This preliminary informational bulletin provides information on High Oil Pressure on Startup After Engine Replacement Concern.
• 10113074May 2, 2013Electrical system, Equipment. This Preliminary Information communication provides information to the technician that after replacing the Instrument Panel Cluster the exchange center is unable to program the actual mileage on the odometer or the actual mileage is unknown. Dealer will need to follow dealer to the General Motors service policies and procedures manual section 3.2.4 odometer servicing.
• 10130652Apr 25, 2013Equipment. This technical bulletin provides Warranty Administration - New Labor Codes information.
• 10130627Apr 11, 2013Equipment. This technical bulletin provides a revision of 99-04-20-002G to add 2013-2014 model years.
• 10112885Feb 26, 2013Equipment. This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
• 10112857Feb 13, 2013Electrical system. This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10133130Jan 16, 2013Body and structure. This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
• 10112664Dec 13, 2012Electrical system. This Preliminary Information communication provides information to the technician about vehicles may have a no power or no connect concern. Technician will find that the OnStar led is red and Diagnostic Trouble Code U1500 is set. Technician will need to replace the Vehicle Communication Interface Module if the Station Identification number falls in the ranges 14,000,000 - 16,000,000 or 22,000,000 - 23,200,000.
• 10112655Dec 12, 2012Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10112641Dec 12, 2012Engine cooling. This Preliminary Information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correct fluid to the proper testing center.
• 10126171Nov 28, 2012Equipment. This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
• 10112607Nov 28, 2012Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10112600Nov 26, 2012Transmission and drivetrain. This Preliminary Information communication provides information to the technician with the axel setup information from American Axle Manufacturing. Technician should be advised that the maximum pinion shim to be used or stacked behind the pinion is 0.050?, and the minimum pinion shim is 0.020? for an 8.6 axle. The range for available pinion depth shims for the 10.5? axle is 0.006? to 0.024?. When setting the…
• 10112528Nov 1, 2012Electrical system. This Preliminary Information communication provides information to the technician about vehicles that during battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system. Technician should understand the power cycles of the various OnStar systems. All Generation 6, 7, 8, and 9 systems are powered up continuously for 48 hours from ignition…
• 10112494Oct 18, 2012Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.
• 10246951Oct 1, 2012Equipment. Programming And Activation Of Replacement OnStar Modules.
• 10038294Jan 1, 2012Seat belts. Gm: there are seat belt problems: difficulty latching and unlatching buckle. Buckle release button is sticking. Seat belt warning light illuminated. Likely caused by sticky beverages that are spilled into the buckle assembly. *rm updated 4/3/12.
• 10042986Nov 1, 2011Seats. General motors: information provided by bulletin for all 2012 and prior general motor trucks and passenger vehicles regarding the adjustable comfort and custom upholstery of the driver and the passenger head restraint.
• 10036545Oct 1, 2010Steering. Buick/cadillac/chevrolet/gmc/oldsmobile and hummer: information on pitman arm shaft seal service kit. Do not replace entire steering gear for pitman seal leak. Technicians have been replacing entire steering gears due to not being able to service just leaking pitman shaft seal. *pe updated 5/9/11.
• 10027804Nov 1, 2008Electrical system, Equipment. General motors corp: special coverage adjustment; analog onstar deactivation. *pe updated 2/17/09.
• 10026804Oct 1, 2008Transmission and drivetrain. Gmc: fluid leak from transmission oil cooler lines due to corrosion. All 2000-2006 light duty trucks equipped with the light duty automatic transmission.
• 10026805Sep 1, 2008Equipment. Buick chevrolet gmc service campaign: see document search button for owner letter. Special coverage adjustment-analog onstar deactivation. Csc letter was received.
• 10026704Aug 1, 2008Fuel system. Gmc: fuel gauge fluctuation in park or neutral, causing the low fuel light to illuminate.
• 10026586Jun 1, 2008Equipment. Buick cadillac chevrolet gmc hummer oldsmobile pontiac saab saturn service campaign: see document search button for owner letter. Special coverage adjustment-analog onstar deactivation. Fcc ruled in 2002 wireless carriers would no longer re required to support analog wireless network starting in 2008. *pe csc letter was received. Updated 12/1/08.
• 10020462Oct 23, 2006Body and structure. Clunk noise felt through the floor pan.
• 10019186Feb 16, 2006Interior lighting, Exterior lighting. Ipc, interior lights and/or headlamps flicker. *ak fb2
• 10018585Jan 6, 2006Electrical system. Fuel and temperature gauge inoperative, low fuel and battery light on, prndl inoperative.
• 10017299Nov 2, 2005Transmission and drivetrain. Electronic transfer case unable to complete shift.
• 10017190Oct 27, 2005Transmission and drivetrain. 4l60e, 4l65e replacement valve body gaskets does not seem to fit.
• 10017165Oct 27, 2005Electrical system. Instrument panel cluster interior and/or head lamps flicker.
• 10014809May 10, 2005Transmission and drivetrain. 4wd inoperative and diagnostic trouble code (dtc) u1026 atc fuse open.
• 10013572Apr 21, 2005Transmission and drivetrain. 4wd models with noise, vibration on dry pavement.
• 10013530Apr 21, 2005Electrical system. Interior lights inoperative after bcm replacement b2618 diagnostic trouble code.
• 10012705Oct 1, 2004Transmission and drivetrain. Revised drive pinion flange yoke and or oil seal replacement procedure. *eh updated
• 10012703Feb 1, 2004Engine cooling. Diagnostic information for intermittent vehicle no crank dead battery.
• 10016473Jul 1, 2003Body and structure. Water leak in front floor carpet area. Gm tech link.
• 10013130Oct 8, 2002Other or unknown. Idl emerging issues broadcast covering topics such as the onstar, california emissions, an overview of the evap operation, wiring issues for the seats, and shutter during parking lot maneuvers.

← All problems reported for the 2000 Chevrolet Blazer