2005 Chevrolet Blazer Technical Service Bulletins

486 technical service bulletins (TSBs) are on record for the 2005 Chevrolet Blazer. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10112857Feb 13, 2013Electrical system. This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10133130Jan 16, 2013Body and structure. This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
• 10133125Jan 14, 2013Equipment. This informational bulletin provides information on a update for the Electronic Component Exchange Program (U.S. and Canada Only)
• 10138541Dec 17, 2012Equipment. This warranty administration bulletin provides information on the Clarification of Use for Dealer Empowerment Labor Operations and Customer Enthusiasm
• 10113843Dec 17, 2012Equipment. This warranty administration bulletin provides information on the Clarification of Use for Dealer Empowerment Labor Operations and Customer Enthusiasm
• 10112664Dec 13, 2012Electrical system. This Preliminary Information communication provides information to the technician about vehicles may have a no power or no connect concern. Technician will find that the OnStar led is red and Diagnostic Trouble Code U1500 is set. Technician will need to replace the Vehicle Communication Interface Module if the Station Identification number falls in the ranges 14,000,000 - 16,000,000 or 22,000,000 - 23,200,000.
• 10112655Dec 12, 2012Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10112641Dec 12, 2012Engine cooling. This Preliminary Information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correct fluid to the proper testing center.
• 10138545Dec 7, 2012Equipment. This informational bulletin provides a list off all the issues revolving around new vehicles for a one stop place to find growing concerns around them.
• 10113837Dec 7, 2012Equipment. This informational bulletin provides a list off all the issues revolving around new vehicles for a one stop place to find growing concerns around them.
• 10126163Nov 30, 2012Electrical system. This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
• 10126171Nov 28, 2012Equipment. This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
• 10112607Nov 28, 2012Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10112600Nov 26, 2012Transmission and drivetrain. This Preliminary Information communication provides information to the technician with the axel setup information from American Axle Manufacturing. Technician should be advised that the maximum pinion shim to be used or stacked behind the pinion is 0.050?, and the minimum pinion shim is 0.020? for an 8.6 axle. The range for available pinion depth shims for the 10.5? axle is 0.006? to 0.024?. When setting the…
• 10126192Nov 20, 2012Equipment. This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.
• 10126196Nov 13, 2012Equipment. This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.
• 10126200Nov 12, 2012Equipment. This informational bulletin provides a single point reference and strategy document to aid in reducing customer comebacks, and the possibility of buyback situations by outlining specific guidelines, strategy and forms that will assist with this goal, by identifying, clarifying and documenting customer concerns accurately at each service visit.
• 10126198Nov 12, 2012Equipment. This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
• 10112560Nov 9, 2012Brakes. This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their…
• 10126203Nov 8, 2012Equipment. This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
• 10112528Nov 1, 2012Electrical system. This Preliminary Information communication provides information to the technician about vehicles that during battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system. Technician should understand the power cycles of the various OnStar systems. All Generation 6, 7, 8, and 9 systems are powered up continuously for 48 hours from ignition…
• 10112494Oct 18, 2012Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.
• 10118637Oct 15, 2012Equipment. This informational bulletin provides information on dealer responsibility for cargo carrying capacity labeling and the part numbers for the labels.
• 10118635Oct 15, 2012Visibility (wipers, defrost, mirrors). This preliminary informational bulletin provides a procedure for relearning the power folding mirriors and road testin to verify they correct a condtion of the power folding mirriors glass shakes, flutters at normal driving conditions.
• 10118634Oct 15, 2012Transmission and drivetrain. This warranty administration bulletin provides information on the change in automatic transmission add conditions documentation and claim submissions
• 10084683Oct 15, 2012Equipment, Body and structure, Visibility (wipers, defrost, mirrors). This preliminary informational bulletin provides a procedure for relearning the power folding mirriors and road testin to verify they correct a condtion of the power folding mirriors glass shakes, flutters at normal driving conditions.
• 10118626Oct 10, 2012Equipment. This warranty administrational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm
• 10118619Oct 5, 2012Equipment. This informational bulletin provides information on newly release bulletins used to fi the vehicles in the field the first time.
• 10246951Oct 1, 2012Equipment. Programming And Activation Of Replacement OnStar Modules.
• 10037570Apr 1, 2012Body and structure. Gm: on some truck models there is some frame corrosion. *rm updated on 5/2/2012.
• 10038294Jan 1, 2012Seat belts. Gm: there are seat belt problems: difficulty latching and unlatching buckle. Buckle release button is sticking. Seat belt warning light illuminated. Likely caused by sticky beverages that are spilled into the buckle assembly. *rm updated 4/3/12.
• 10043185Nov 1, 2011Transmission and drivetrain. Cadillac/chevrolet/gmc/hummer: some suvs and trucks are exhibiting a condition where by grinding/ratcheting type noise coming from automatic transmission when shifting into park while in 4wd low (4lo) range.
• 10037184Oct 1, 2011Seat belts. Gm: service bulletin explaining when the safety belts are supposed to lock. *rm updated 12/6/11.
• 10036545Oct 1, 2010Steering. Buick/cadillac/chevrolet/gmc/oldsmobile and hummer: information on pitman arm shaft seal service kit. Do not replace entire steering gear for pitman seal leak. Technicians have been replacing entire steering gears due to not being able to service just leaking pitman shaft seal. *pe updated 5/9/11.
• 10026804Oct 1, 2008Transmission and drivetrain. Gmc: fluid leak from transmission oil cooler lines due to corrosion. All 2000-2006 light duty trucks equipped with the light duty automatic transmission.
• 10026704Aug 1, 2008Fuel system. Gmc: fuel gauge fluctuation in park or neutral, causing the low fuel light to illuminate.

← All problems reported for the 2005 Chevrolet Blazer