1991 Chevrolet Camaro Recalls

NHTSA lists 4 recall campaigns for the 1991 Chevrolet Camaro. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 94V077000Apr 25, 1994232,988 vehicles potentially affected
  Fuel system, gasoline › Storage › Tank assembly › Filler pipe and cap
  Covers: Chevrolet Camaro 1991–1992, Pontiac Firebird 1991–1992

  Reported issue: The fuel filler neck solder joint can develop cracks or pin hole leaks, which does not comply with fmvss no. 301, "fuel system integrity." the cracks and holes can allow fuel vapor and fuel leakage.

  Possible consequence: Consequence of non-compliance: gasoline vapors and fuel leaks can result in a fire if exposed to a source of ignition.

  Remedy: Dealers will inspect the fuel tank assembly and replace those which exhibit the cracks or pin hole leaks.

  Full campaign details →

• 91V074000May 3, 1991173 vehicles potentially affected
  Seats › Front assembly › Recliner
  Covers: Chevrolet Camaro 1991

  Reported issue: The front seat upper hinge cover screws are too long, and interfere with the seat back inertia lock. This prevents the seat back from locking properly.

  Possible consequence: In the event of a sudden stop or vehicle impact, anunlocked seat back would increase the risk of injury to the seat occupant.

  Remedy: Replace screws securing upper hinge trim cover with correct length screws.

  Full campaign details →

• 91V067000Apr 22, 199140,696 vehicles potentially affected
  Seat belts › Front › Anchorage
  Covers: Chevrolet Camaro 1991, Pontiac Firebird 1991

  Reported issue: The metal latchplates may not engage the buckle assemblies, causing a "no latch" condition. Movement of the seat occupant in this condition could cause latchplate release from the buckle.

  Possible consequence: Unbelted or incorrectly belted seat occupants aresubjected to increased risk of injury in the event of sudden stop or accident.

  Remedy: Replace the retractor assembly for the safety belt (front and rear in coupes and front only in convertibles).

  Full campaign details →

• 91V031000Feb 19, 199121 vehicles potentially affected
  Visibility › Windshield
  Covers: Chevrolet Camaro 1991, Pontiac Firebird 1991

  Reported issue: Poor bond adhesion between the windshield glass and the mounting, which could allow the windshield to separate from the vehicle during a collision. This fails to conform with fmvss 212.

  Possible consequence: If windshield separation occurs in a collision, anunbelted occupant could be ejected from the vehicle, and personal injury couldoccur.

  Remedy: Remove all sealer from windshield and mounting; apply new bonding and sealant material, and reinstall windshield.

  Full campaign details →

NHTSA investigations

• PE97008Inadvertent air bag deploymentClosed · Feb 3, 1997
• EA93005FUEL LEAKSClosed · Jan 29, 1993
• PE92073Fuel tank leakageClosed · Sep 2, 1992
• DP91012Axle shaft and wheel lug studsClosed · Sep 17, 1991

← All problems reported for the 1991 Chevrolet Camaro