2011 Chevrolet Camaro Technical Service Bulletins

1,748 technical service bulletins (TSBs) are on record for the 2011 Chevrolet Camaro. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10114296Oct 16, 2014Equipment. This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on…
• 10135322Oct 10, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135321Oct 10, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the Regular Production Option Code list to verify if the disc is compatible.
• 10114281Oct 6, 2014Fuel system. This informational bulletin states that it no longer valid and refers to a new bulletin.
• 10114280Oct 6, 2014Equipment. This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
• 10039487Oct 1, 2014Transmission and drivetrain. Gm: 2010-2011 camaro. The clutch pedal does not fully return after being pressed. It usually happens when the vehicle is cold. *rm updated 3/27/15.
• 10112251Sep 24, 2014Engine cooling. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10150637Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10142226Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10137805Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10150634Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
• 10150632Sep 19, 2014Fuel system. This informational bulletin provides information on top tier fuels and what brands are available.
• 10142222Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
• 10142220Sep 19, 2014Fuel system. This informational bulletin provides information on top tier fuels and what brands are available.
• 10137801Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
• 10137799Sep 19, 2014Fuel system, Equipment. This informational bulletin provides information on top tier fuels and what brands are available.
• 10150628Sep 17, 2014Equipment. This informational bulletin ask the dealers for digital pictures to better enhance field reports only.
• 10142211Sep 17, 2014Equipment. This informational bulletin ask the dealers for digital pictures to better enhance field reports only.
• 10137790Sep 17, 2014Equipment. This informational bulletin ask the dealers for digital pictures to better enhance field reports only.
• 10150627Sep 16, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10150626Sep 16, 2014Equipment. This informational bulletin provides additional information to the technicians and how to submit a field product report.
• 10142208Sep 16, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10142207Sep 16, 2014Equipment. This informational bulletin provides additional information to the technicians and how to submit a field product report.
• 10137787Sep 16, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10137786Sep 16, 2014Equipment. This informational bulletin provides additional information to the technicians and how to submit a field product report.
• 10112218Sep 11, 2014Engine. This Preliminary Information communication provides information to the technician about vehicles that may have a flutter or buzz that occurs at 800-900 revolutions per minute with the vehicle in second or third gear. General Motors Engineering is investigating the concern.
• 10094501Sep 9, 2014Equipment. This technical bulletin provides a procedure to repair the hvac drain grommet to correct the customers concern of wet carpetting.
• 10112210Sep 8, 2014Transmission and drivetrain. This Preliminary Information communication provides information to the technician about vehicles that may have a flutter or buzz that occurs at 800-900 revolutions per minute with the vehicle in second or third gear. General Motors Engineering is investigating the concern.
• 10064453Sep 1, 2014Electrical system. Summary to be provided on a future date.
• 10056477Sep 1, 2014Electrical system. Chevrolet: some vehicles experiencing incorrect or inaccurate ambient air temperature reading and ipc needs to be reprogrammed. Model 2014 camaro.
• 10112197Aug 26, 2014Body and structure. This Preliminary Information communication provides information to the technician about vehicles that may have a creak, pop, or snap noise coming from the underside while driving over bumps. Technician will need to check all the fasteners on the Underbody Braces front to back for the correct torque.
• 10138693Aug 25, 2014Equipment, Electrical system. This warranty bulletin explains how to use the EL-50313 Midtronic GR8 Battery tester to test a battery and determin if it is warranty or not.
• 10138692Aug 25, 2014Equipment. This informational bulletin provides information to the dealers on properly maintaining vehicles in inventory.
• 10138683Aug 19, 2014Fuel system, Engine. This preliminary bulletin provides additional diagnoses for engine misfires, popping noise after cylinder head or fuel rail repair.
• 10112182Aug 19, 2014Body and structure. This Preliminary Information communication provides information to the technician about vehicles that may have a squeak-type noise when closing the door. Technician will need ensure the weep holes are free and clear of debris.
• 10138681Aug 18, 2014Tires, Equipment. This informational bulletin provides the technician with information on tire radial force variations and how to use it.
• 10112171Aug 18, 2014Equipment, Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a knock noise, seized engine, lower end squeak or squeal from the engine. Technician will inspect the oil control solenoids for metal debris. Also inspect for damage to the cam caps Journals and camshaft journals on the heads. The check the timing chain idler sprockets for stiffness when turning. If any of…
• 10112160Aug 8, 2014Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
• 10138671Aug 7, 2014Equipment, Visibility (wipers, defrost, mirrors). This preliminary bulletin provides a procedure to replace the windshild to correct the customers concern of a loose mirrior and/or bracket fell off.
• 10112152Aug 7, 2014Equipment, Seats. This Preliminary Information communication provides information to the technician about vehicles that may have an oil-canning or popping noise coming from the rear seat foot well area while driving. Technician will need to dimple the sheet metal in front of the rear seat lower cushion. After the dimple is created apply butyl patch on the panel, being sure to also cover the dimpled surface with the patch.
• 10056361Aug 1, 2014Engine. Buick/cadillac/chevrolet/saturn/pontiac/ gmc: vehicle experience lower end squeak or squeal, knocking noise or seized engine possibly the main bearing or rod had failed.
• 10112144Jul 31, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicle that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
• 10140439Jul 30, 2014Equipment. This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.
• 10138594Jul 30, 2014Equipment. This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.
• 10137844Jul 30, 2014Equipment. This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.
• 10112142Jul 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio "maximum number of phones are currently paired to the vehicle". Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.
• 10112137Jul 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10140437Jul 25, 2014Equipment, Engine. This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
• 10138592Jul 25, 2014Equipment. This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
• 10137842Jul 25, 2014Equipment, Engine cooling. This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.

← All problems reported for the 2011 Chevrolet Camaro