2014 Chevrolet Camaro Technical Service Bulletins

1,838 technical service bulletins (TSBs) are on record for the 2014 Chevrolet Camaro. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10147367Oct 10, 2018Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10147348Oct 3, 2018Fuel system. This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
• 10144476Aug 28, 2018Equipment. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10144454Aug 9, 2018Engine cooling, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon and may also have an oil or coolant leak. Technician may find coolant or oil in a spark plug tube. If the Spark Plug Tube is leaking and it is determined that the oil or coolant is not coming from a leak above the spark plug then replace the cylinder Head, spark plug and coil.
• 10144453Aug 9, 2018Engine, Engine cooling. This Preliminary Information communication provides information to the technician that Diagnostic Trouble Codes P0016, P0017, P0018, P0019, P0008 or P0009 may be set. Technician will need to inspect for loose timing chains or tensioners. If after following Service Information diagnostics the root cause is not found inspect the reluctor for the crankshaft sensor. If the reluctor has moved then replace crankshaft.
• 10144451Aug 8, 2018Engine. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10144423Aug 3, 2018Equipment. This Preliminary Information communication provides information to the technician about vehicles that have rear license plate mounting holes will not line up with the large rectangular holes in the rear fascia of the vehicle. Techs will need to line up the license plate and use self-tapping screws that are included in the Pre-Delivery Inspection bag toinstall the screw into the dimple.
• 10143778Jul 25, 2018Electrical system, Back-over prevention (rear camera). This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the…
• 10143762Jul 12, 2018Engine cooling. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have oil mixed in with the engine coolant. Technician will need to inspect the oil cooler if equipped for possible leaking into the cooling system through the radiator. If no issue found replace the engine as well as all rubber coolant hoses.
• 10143758Jul 9, 2018Equipment. This Preliminary Information communication provides information to the technician on how to tell the difference between the integrated center stack, the radio, the human machine interface, and the vehicle communication interface module. There are pictures of all the individual modules for identification purposes.
• 10143752Jul 3, 2018Visibility (wipers, defrost, mirrors). This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10143449Jun 20, 2018Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10143443Jun 14, 2018Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
• 10141371May 23, 2018Equipment, Electrical system. This Preliminary Information communication provides information to the technician about connectivity concerns when connecting an Apple device via USB cord. Technician should insure the customer is using an original equipment manufacturer Apple USB cable.
• 10141364May 18, 2018Engine cooling, Equipment. This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer ofa repair kit they received that will prevent this issue when installed correctly.
• 10137599Apr 27, 2018Equipment. This informational bulletin provides information on Audio Volume Stuck High or Low with No DTCs and that this is a normal characteristic.
• 10137556Apr 20, 2018Electrical system. This informational bulletin explains to the dealer how to cover a possible customers mistake when a fuse has been blown.
• 10137589Apr 19, 2018Engine cooling. This informational bulletin provides information for engine oil life monitor operation calculation.
• 10137569Apr 18, 2018Brakes. This bulletin provides information on possible normal brake drag caused by sitting.
• 10137505Apr 16, 2018Body and structure. The purpose of this Preliminary Information is to provide tips and aid the dealership technicians in retaining the folding top in the side rails after either side rail or the canvas top has been replaced for service.
• 10137562Apr 13, 2018Visibility (wipers, defrost, mirrors). This PI bulletin provides information on Rear and Side Tempered Glass Spots (Quench Marks) and they are normal characteristic.
• 10137551Apr 13, 2018Engine cooling. This Bulletin provides inspection/diagnosis/correction information on a cold start misfire and/or rough idle and DTC P0300 that may also be set.
• 10137499Apr 11, 2018Brakes. This Preliminary Information communication provides information to the technician about diagnosing a vehicle that has a "Change Brake Pads" message that appears in the Driver Information Center. Technician will need to first inspect the brake pad wear sensor harness for damage.
• 10137554Apr 9, 2018Transmission and drivetrain. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
• 10137560Apr 6, 2018Body and structure. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
• 10137490Apr 6, 2018Back-over prevention (rear camera). This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the…
• 10137537Apr 4, 2018Equipment. This informational bulletin provides information for use on a Product Assistance Claim (PAC), which is formally known as a Product Allegation Resolution (PAR) claim.
• 10137557Apr 3, 2018Equipment. This informational bulletin provides information to dealership personnel on policies regarding a Product Assistance Claim (PAC) within the Courtesy Transportation Assistance Program.
• 10137383Mar 28, 2018Transmission and drivetrain, Engine. This informational bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
• 10137386Mar 27, 2018Electrical system, Equipment. This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
• 10137202Mar 27, 2018Electrical system. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
• 10137381Mar 26, 2018Tires. This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (in Canada, the Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
• 10137380Mar 16, 2018Equipment. This informational bulletin provides information to dealership personnel on properly eliminating unwanted odors in vehicles.
• 10137182Mar 12, 2018Engine cooling. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle.
• 10137385Mar 9, 2018Equipment. This informational bulletin was created to inform that any accessories that are installed from the GM factory will be covered under the standard vehicle warranty and dealer installed accessories will be covered for a full year (12 months).
• 10137384Mar 9, 2018Visibility (wipers, defrost, mirrors). This informational bulletin provides information for dealers/technicians on diagnosing and repairing a side window glass not clearing the molding when indexing down during door opening.
• 10137306Mar 9, 2018Visibility (wipers, defrost, mirrors), Body and structure, Electrical system. This technical bulletin provides a procedure to replace the drivers front door window regulator motor and door wiring harness if water and/or corrosion is found in the connectors.
• 10137382Mar 7, 2018Equipment. This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
• 10137297Mar 1, 2018Wheels, Brakes. This informational bulletin provides information for cleaning brake dust off of aluminum or chrome wheels.
• 10137375Feb 28, 2018Electrical system. This technical bulletin provides a procedure to properly reprogram an onstar module to correct a condition of Red LED, No WiFi Operation, and/or Limited OnStar® Module Functionality After OnStar Module Replacement for Another Condition.
• 10137343Feb 27, 2018Engine. This informational bulletin provides a revision for 09-06-04-015B (Vehicles Sitting Outside on Dealer Lots for Extended Periods with Hard Start/No Start Condition) to add the 2015-2018 model years.
• 10137283Feb 27, 2018Engine, Transmission and drivetrain. This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
• 10129900Feb 22, 2018Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon and may also have an oil or coolant leak. Technician may find coolant or oil in a spark plug tube. If the Spark Plug Tube is leaking and it is determined that the oil or coolant is not coming from a leak above the spark plug then replace the cylinder Head, spark plug and coil.
• 10129896Feb 20, 2018Engine. This Preliminary Information communication provides information on a rattle, tick, or knock type noise. Any drivability concerns they should be addressed prior to the following diagnostic progression. A sound file or video with sound of the noise needs to be made prior to dis-assembly to help isolate to one area in the engine. There are four different steps to diagnosis the concern. This communication was updated…
• 10137344Feb 15, 2018Electrical system, Engine. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2 9U.S. and Canada
• 10129890Feb 14, 2018Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have an engine oil odor with no oil leaks found. Technician will need to inspect for an external oil leak. Technician will need to ensure the oil level is correct. Technician will need to replace the rear main seal, if no oil leaks were found and the engine oil level is not over full.
• 10137345Feb 13, 2018Equipment. This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
• 10129864Feb 7, 2018Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have hard start, extended crank, or black smoke from the exhaust when starting. Technician will need to perform fuel quality test, spark test, and a compression test. Technician should also install a vacuum gauge prior to cold start and watch needle for signs of a sticking valve.
• 10129857Feb 5, 2018Electrical system. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
• 10137341Feb 1, 2018Electrical system, Equipment. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.

← All problems reported for the 2014 Chevrolet Camaro