2014 Chevrolet Camaro Technical Service Bulletins

1,838 technical service bulletins (TSBs) are on record for the 2014 Chevrolet Camaro. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10072577Nov 1, 2014Body and structure. Summary to be provided on a future date.
• 10069951Nov 1, 2014Engine. Summary to be provided on a future date.
• 10069284Nov 1, 2014Wheels. Summary to be provided on a future date.
• 10057067Nov 1, 2014Suspension. Chevrolet: when braking or accelerating, a noise in rear of vehicle, like clunking or a popping sound, can be heard and upper control arm ball joint may be loose in rear knuckle. Model 2014-15 camaro.
• 10057013Nov 1, 2014Tires. Chevrolet: to seat tire bead to wheel, the tire must be higher than maximum inflation sidewall pressure, when being installed. Model 2014-15 camaro z/28 only.
• 10135359Oct 31, 2014Equipment. This Preliminary Information communication advises the technician that parts for the 2014 and 2015 Chevrolet Camaro equipped with Regular Production Option Code Z28 have been place on parts restriction by General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
• 10135356Oct 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10114329Oct 30, 2014Wheels. This preliminary bulletin provides a procedure to paint the lug nut recess if the customer states that the paint looks thin.
• 10114328Oct 30, 2014Equipment. This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and now is refered to Article 3.2.9 of the 1st addition manual for details of Technician Identification and Accounting of Labor Time
• 10114326Oct 29, 2014Electrical system. This preliminary bulletin provides a procedure to test for the customers concern of an exhaust rattle noise from the valve actuators on cold start up and update the either the chassis control or fuel pump module.
• 10114324Oct 28, 2014Tires. This prelimenary bulletin provides information on a normal codition of higher than normal bead seating of the tire.
• 10114320Oct 28, 2014Electrical system. This preliminary bulletin provides a procedure to remove and inspect the clutch select solenoid valve for damage, located in the valve body to correct the customers concern of reduced acceleration at low speeds and trans slip at lauch.
• 10114318Oct 28, 2014Fuel system. This informational bulletin was provides information for the technician of cold start ticking noises in the engine compartment and may be caused by the fuel pump and/or the fuel injectors and no repairs are needed for a normal condition.
• 10135352Oct 27, 2014Equipment. This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
• 10114316Oct 27, 2014Equipment. This preliminary bulletin provides information to reset the phone and factory reset of the radio to correct the customers concern of the iphone connection concerns.
• 10114312Oct 24, 2014Equipment. This informational bulletin explains not to put multiple keys on one key ring and how to tag a key.
• 10114309Oct 23, 2014Visibility (wipers, defrost, mirrors). This informational bulletin explains how to care for wiper blades.
• 10081062Oct 22, 2014Transmission and drivetrain. 13332a - customer satisfaction (revised part information). Certain vehicles equipped with a 3.6l v-6 engine (lfx) and a 6l50 6-speed automatic transmission (myb) may have a transmission 2-6 clutch pack that was misbuilt. This could result in a rattle noise and reduced transmission torque capacity. If this occurs, a diagnostic code may be set and a mil may be illuminated. In addition, the transmission may be limited…
• 10135342Oct 20, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135337Oct 17, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The…
• 10114299Oct 17, 2014Equipment. This informational bulletin provides a quick guide to updating which model vehicle after replacing the IPC.
• 10114298Oct 17, 2014Transmission and drivetrain. This preliminary bulletin provides a procedure to replace the clutch pedal assembly due to thermal contraction of the clutch fluid and to correct the customers concern of the pedal feels low or doesn?t return.
• 10114296Oct 16, 2014Equipment. This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on…
• 10135326Oct 13, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that have rear license plate mounting holes will not line up with the large rectangular holes in the rear fascia of the vehicle. Dealer will need to line up the license plate and use self-tapping screws that are included in the Pre-Delivery Inspection bag , and install the screw into the dimple.
• 10114292Oct 13, 2014Electrical system. This preliminary bulletin provides a procedure on how to cold crank test a battery in a vehicle.
• 10135322Oct 10, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135321Oct 10, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the Regular Production Option Code list to verify if the disc is compatible.
• 10135315Oct 7, 2014Transmission and drivetrain, Back-over prevention (rear camera). This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the…
• 10114281Oct 6, 2014Fuel system. This informational bulletin states that it no longer valid and refers to a new bulletin.
• 10114280Oct 6, 2014Equipment. This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
• 10114278Oct 2, 2014Transmission and drivetrain. This preliminary bulletin provides a procedure to inspect and repair the parking pawl spring in the transmission if the customer states that theres a grind or rattle noise during a left turn or bump.
• 10112251Sep 24, 2014Engine cooling. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10150637Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10142226Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10137805Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10150634Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
• 10150632Sep 19, 2014Fuel system. This informational bulletin provides information on top tier fuels and what brands are available.
• 10142222Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
• 10142220Sep 19, 2014Fuel system. This informational bulletin provides information on top tier fuels and what brands are available.
• 10137801Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
• 10137799Sep 19, 2014Fuel system, Equipment. This informational bulletin provides information on top tier fuels and what brands are available.
• 10150628Sep 17, 2014Equipment. This informational bulletin ask the dealers for digital pictures to better enhance field reports only.
• 10142211Sep 17, 2014Equipment. This informational bulletin ask the dealers for digital pictures to better enhance field reports only.
• 10137790Sep 17, 2014Equipment. This informational bulletin ask the dealers for digital pictures to better enhance field reports only.
• 10112235Sep 17, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that may have ambient air temperature display may be inaccurate on the Instrument Panel Cluster. If the Outside Ambient Temperature sensor was relocated then the Instrument Panel Cluster will need to be updated with the latest calibrations using Service Programming System.
• 10080820Sep 17, 2014Transmission and drivetrain. 14368 - customer satisfaction. Certain vehicles equipped with a manual transmission (mg9, m10, mm6) may have a condition in which the transmission can get stuck in gear due to a shift linkage retaining clip not being properly installed. If the retaining clip is not in the correct position or is missing, the shift linkage pin may back out of assembly. If this occurs, the vehicle cannot be shifted out of whichever…
• 10150627Sep 16, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10150626Sep 16, 2014Equipment. This informational bulletin provides additional information to the technicians and how to submit a field product report.
• 10142208Sep 16, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10142207Sep 16, 2014Equipment. This informational bulletin provides additional information to the technicians and how to submit a field product report.

← All problems reported for the 2014 Chevrolet Camaro