2017 Chevrolet Camaro Technical Service Bulletins

1,579 technical service bulletins (TSBs) are on record for the 2017 Chevrolet Camaro. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10099466Sep 23, 2016Engine. This preliminary information communication provides information to the technician about vehicles that may have a service engine soon malfunction indicator lamp on and diagnostic trouble code p0300 - p0308 may set. Technician will inspect for lose sparkplug wire. If a spark plug wire is found lose check for a missing “c” clip on the wire end for the ignition coil. If the clip is missing replace the wire.
• 10118963Sep 22, 2016Brakes. This informational bulletin provides information on the proper ways to remove or replace the key cylinder covers due to some vehicles having the key cylinders hidden during the time of delivery.
• 10118915Sep 22, 2016Equipment. This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
• 10118910Sep 22, 2016Equipment. This informational bulletin provides information on new tools used for the Hem Flanges and how to repair and seal the flanges when the repairs are done.
• 10118956Sep 19, 2016Equipment. This technical bulletin provides repair information to correct a customer concern for a rattle noise at the radio control/display/ICS (Integrated Center Stack), or coming from the center dash area.
• 10118908Sep 19, 2016Equipment. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
• 10118914Sep 16, 2016Electrical system. This informational bulletin explains the programming method quick reference guide for the IPC Odometer.
• 10118950Sep 15, 2016Equipment. This technical bulletin provides a procedure to pull on the metal infront of the HVAC recirc door to correcct a condition of a thump noise when switching the HVAC modes due to the recirc door coming into contact with the metal infront of it.
• 10118909Sep 14, 2016Tires. This GM of Canada New Vehicle Tire Warranty Program and GWM Transaction Submission Information Bulletin provides information for the new tires that the vehicle are equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage) and for vehicles within this warranty period, the defective tires will be replaced on a pro rata…
• 10100442Sep 14, 2016Electrical system. This preliminary information communication provides information to the technician about vehicles that may have the onstar wireless fidelity inoperative. Technician will need to contact general motors technical assistance center with a scan tool connect to the vehicle for further assistance.
• 10097132Sep 14, 2016Electrical system, Equipment. This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the onstar module for five minutes. After the power has been removed for five minutes, if the onstar system is working release the vehicle.
• 10099127Sep 13, 2016Electrical system. This preliminary information communication provides information to the technician about vehicles voice recognition inoperative for calling bluetooth phone contacts. Technician will need to clear all private data and repair any phones that were deleted.
• 10098423Sep 13, 2016Steering. This preliminary information communication provides information to the technician about the media oriented systems transport bus diagnostic tool kit (el-51578) has been released to help diagnose any of the media oriented systems transport bus concerns. The kit contains header connectors that are installed to bypass media oriented systems transport bus modules. The bypass connector also contains a terminal for…
• 10118943Sep 12, 2016Tires. This informational bulletin provides information to help the customers that are not familiar with specialty tires like summer, competition, run-flat and self-sealing.
• 10098501Sep 12, 2016Electrical system. This preliminary information communicates that when customer or technician may indicate when attempting to add a new transmitter to a vehicle following the adding transmitters without service programming system procedure. The procedure will not complete and a message "remote learn pending" will be displayed on the driver information center.
• 10118911Sep 1, 2016Fuel system. This informational Bulletin provides Do's and Don'ts for maximizing gasoline engine fuel economy, other various tips and a list of websites for additional information.
• 10082412Aug 31, 2016Electrical system. This technical bulletin provides a procedure to check the cylinders for damaged pistons and determine if the use of aftermarket calibrations or performance parts may be the cause.
• 10083241Aug 30, 2016Electrical system. This preliminary information communication provides information to the technician about the use of j-35616-64b terminal test probe, replacement terminals, and terminated leads. The j-35616-64b is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (j-38125-620h) located in lear tray 7 part number 963716-2.
• 10082277Aug 30, 2016Tires, Equipment. This informational bulletin provides the correct information that is needed to correctly know what tpm sensor is needed to be installed on vehicles if there is accessory wheels installed and who to contact when the accessory wheels will not learn the tpm's to the vehicles.
• 10083325Aug 29, 2016Equipment. This preliminary information communication advises the technician that the human machine interface, radio or tuner, radio controls, integrated center stack, display, and media disc players are placed on restriction through the general motors technical assistance center. Dealer will need to contact general motors technical assistance center for further assistance.
• 10082869Aug 29, 2016Engine. This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
• 10082340Aug 24, 2016Transmission and drivetrain. This technical bulletin provides a procedure to tighten the shifter knob and correct the customers concern of a rattle noise.
• 10082871Aug 23, 2016Wheels. This technical bulletin provides a procedure to clean mating surface of wheels and rotors to correct a customer concern on a clicking noise emanating from either the front or rear wheels location due to interaction between the wheel mounting face and the wheel mounting surface on the brake rotor.
• 10081880Aug 19, 2016Transmission and drivetrain. This technical bulletin provides the procedures to complete a transsmission adaptive learn on all the different types of vehicles and transmissions based on rpo options to correct a condition of harsh shifts on hard accellerations.
• 10082865Aug 15, 2016Seat belts. This preliminary informational bulletin provides a procedure to reposition the front seat belt latch plate for concerns regarding the seat belt webbing or latch plate coming twisted.
• 10082505Aug 15, 2016Seats. This technical bulletin provides a repair procedure to correct a customer concern of hearing a rattle noise coming from the driver or passenger front seat back easy entry release handle.
• 10082822Aug 12, 2016Electrical system, Engine. This informational bulletin provides information on how to test a battery and what is needed to warranty a battery.
• 10082503Aug 12, 2016Equipment. This technical bulletin provides a procedure to balance the folding top front latching mechanism and accuator motor to correct a condition of a "top not secure" message being displayed on the dic.
• 10082403Aug 12, 2016Engine cooling, Equipment, Engine. This technical bulletin provides a procedure to apply epoxy to the exhaust valve pins on vehicles that have the condition of a rattle noise originating from the vehicles exhaust due to the valve pins being loose and causing a noise.
• 10082363Aug 12, 2016Equipment. This warranty administration bulletin provide policy on performing gm covered vehicle services and maintenance on vehicles originating/sold in canada.
• 10082501Aug 11, 2016Equipment. This technical bulletin provides a procedure to replace the rear trunk stripe on vehicles that need the rear bow tie emblem replaced and residue is left over from the removal of the emblem.
• 10082862Aug 8, 2016Tires. This informational bulletin provides information on the rubber used in some performance tires loses flexibility and may develop surface cracks in the tire tread/shoulder area at colder temperatures.
• 10082447Aug 8, 2016Engine cooling. This informational bulletin explains a possible normal whining noise from the balance shaft chain if the vehicle has less than 10,000 miles on it.
• 10083131Aug 5, 2016Electrical system. This preliminary information communication provides the technician with steps on how to program an engine control module when getting a service programming system error code e4491 or e4423. In some cases techline customer support center may need to be contacted to resolve the issue.
• 10082860Aug 3, 2016Equipment. This informational bulletin provides information on gm does not approve the use of “clipping” to repair collision damage to vehicles. Gm has not tested or validated a “clipped vehicle” repair; therefore, gm cannot endorse this type of repair or confirm the crash performance during a subsequent collision.
• 10082437Aug 3, 2016Air bags. This informational bulletin provides information on locating and reconnecting airbag connectors that are not fully seated to correct a customer concern of an airbag warning lamp illuminated, or one, or more, airbag dtc(s) set.
• 10082861Aug 2, 2016Electrical system. This technical bulletin provides a procedure to remove the transport mode on message displayed in the dic due to vehicles shipped over long distances outside the u.s. And canada.
• 10082823Aug 2, 2016Engine cooling. This informational bulletin explains the use of diesel fuel additives in an engine, are not required unless the customer desires additives to prevent fuel concerns depending on fuel or temperature related conditions.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10082422Aug 2, 2016Equipment. This technical bulletin provides diagnostic tips to help correct multiple concerns regarding the usb port being inoperative or unable to play music through the usb port.
• 10082820Aug 1, 2016Engine. This informational bulletins provides information on the intake manifold inspection/replacement after servere internal engine damage.
• 10126063Jul 12, 2016Engine. This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage.
• 10126062Jul 11, 2016Brakes. This informational bulletin provides information on installing the correct tires for vehicles with the condition of under hard acceleration at higher speeds, the traction control light will flash. Or, they may come in for ABS or general handling/braking concerns.
• 10100822Jul 11, 2016Engine. This informational bulletin provides the technician with what may happen to an engine due to lack of maintenance.
• 10108616Jul 1, 2016Transmission and drivetrain. This technical bulletin provides a procedure to tigthen the shifter knob retaining screw to correct a customer concern that the shifter knob is rattling due to a loose shifter knob retaining screw.
• 10089121Jun 29, 2016Tires, Equipment. This informational bulletin provides guidance to gm dealers when using gm approved tire force variation measurement equipment.
• 10081022Jun 14, 2016Electrical system. This preliminary information communication advises the technician that ,when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10089247Jun 10, 2016Equipment. This informational bulletin provides information on the proper use of floor mats.
• 10114105May 31, 2016Engine, Electrical system. This informational bulletin provides information on identifying non-GM (aftermarket) engine calibrations for gasoline engines using Tech 2 or GDS 2.
• 10114101May 25, 2016Wheels. This informational bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening or re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed.

← All problems reported for the 2017 Chevrolet Camaro