2018 Chevrolet Camaro Technical Service Bulletins

1,278 technical service bulletins (TSBs) are on record for the 2018 Chevrolet Camaro. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10163272Jun 26, 2019Equipment. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
• 10163268Jun 26, 2019Equipment, Electrical system. This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
• 10163261Jun 26, 2019Fuel system. This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
• 10163266Jun 25, 2019Equipment, Engine. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
• 10163260Jun 25, 2019Equipment. This informational bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 10163193Jun 25, 2019Equipment. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
• 10164106Jun 20, 2019Tires, Equipment. N192219930-01 - Customer Satisfaction Program (revised warranty information). Certain 2018-2019 model year Chevrolet Camaro vehicles, equipped with competition-oriented tires (RPO R6O/A1Z/ZL1), may have a section missing in the High-Performance Owner?s Manual Supplement explaining warnings about certain conditions when the competition-oriented tires should not be used.
• 10162144Jun 19, 2019Transmission and drivetrain. This Preliminary information communicates to the dealer technician that the torque converters for the 10L80 and 10L90 10 speed transmission are on restriction through the Product Quality Center. Dealers are advised to contact the Product Quality Center if diagnostics has lead to replacement of the transmission torque converter.
• 10162142Jun 19, 2019Equipment. This Preliminary Information communicates additional information to the dealerships when dealing with questions on a vinyl hood wrap regarding care, cleaning and replacement.
• 10162139Jun 18, 2019Transmission and drivetrain. This Preliminary information communicates to the dealer technician that the 10L90 and 10L80 transmissions have been place on a part restriction. Dealers are to contact the Product Quality Center before replacing the transmission assembly.
• 10162126Jun 13, 2019Transmission and drivetrain. This Preliminary information communicates to the dealer technician that the valve body Part Unique Number (PUN) may contain the letter O or the number 0.
• 10162124Jun 13, 2019Electrical system. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
• 10162123Jun 13, 2019Body and structure. This Preliminary Information communication provides information to the technician about vehicles that have several fasteners, located on either side of the hood latch, appear to be loose. Do not tighten, or otherwise move these two fasteners. These fasteners are part of the front fascia support bracket. They have a preset gap by design, and they have Loctite applied to the threads of the fastener so that this…
• 10163263Jun 11, 2019Electrical system, Equipment. This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
• 10163249Jun 10, 2019Steering. This technical bulletin provides repair information to correct a customer concern of Steering Wheel Chatter or Instability.
• 10163237Jun 10, 2019Engine cooling. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
• 10163246Jun 6, 2019Latches, locks and linkages. This informational bulletin provides information for dealers/technicians on an emergency trunk release key won?t turn; unable to open trunk from lock cylinder behind rear seat back; information on convertible key extender.
• 10163215Jun 6, 2019Transmission and drivetrain. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
• 10162106Jun 3, 2019Electrical system. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10162102Jun 3, 2019Equipment. This Preliminary Information communicates information on relearning the power windows if they become inoperative after the vehicle's battery becomes discharged.
• 10161941May 29, 2019Electrical system, Engine cooling, Engine. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software.
• 10161046May 28, 2019Equipment. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10161932May 21, 2019Engine cooling. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
• 10161881May 21, 2019Transmission and drivetrain. This technical bulletin provides information for new transmission oil to use and a procedure for exchanging the old fluid and adding the new fluid to correct a shake/shudder during light throttle acceleration condition.
• 10161968May 20, 2019Transmission and drivetrain. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
• 10161937May 16, 2019Engine cooling. This technical bulletin provides a procedure to modify the right rear exhaust control valve actuator to correct a rattle noise heard from the rear of the vehicle.
• 10161359May 16, 2019Equipment. N192219930 - Customer Satisfaction Program. Certain vehicles, equipped with competition-oriented tires (RPO R6O/AZ1/ZL1), may have a section missing in the High-Performance Owner's Manual Supplement explaining warnings about certain conditions when the competition-oriented tires should not be used.
• 10161021May 15, 2019Equipment. The purpose of this Preliminary Information is to provide dealership technicians some tips on installation of this kit, as well as some common areas to check if the system is inoperative after installation.
• 10161921May 14, 2019Suspension. This informational bulletin provides information for dealers/technicians on visible cracks in shock tower near the strut top mount.
• 10161898May 14, 2019Suspension. This informational bulletin provides information for dealers/technicians on visible cracks in shock tower near the strut top mount.
• 10161009May 13, 2019Visibility (wipers, defrost, mirrors), Electrical system. This Preliminary Information communicates information on relearning the power windows if they become inoperative after the vehicle's battery becomes discharged.
• 10161906May 9, 2019Tires. This informational bulletin provides information for dealers/technicians on Tire Radial Force Variation (RFV).
• 10161929May 8, 2019Equipment. This warranty administration bulletin provide policy information to cover GM's policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
• 10160989May 7, 2019Engine cooling. This Preliminary information communicates A vehicle may have a concern of DTC P050D setting along with a P0300 after a cold start up. White smoke and/or coolant odor may come from exhaust for an extended period of time at cold start as well. Cause Coolant getting into the cylinders, and provides direction for the repair.
• 10160987May 7, 2019Engine. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
• 10160983May 6, 2019Equipment, Engine. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10161907May 2, 2019Equipment. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10160134Apr 30, 2019Engine. This informational bulletin explains the normal noises an engine may make when the ambient temperature outside is cold or the vehicle has sat for a few hours.
• 10160690Apr 24, 2019Fuel system, Engine. This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer of a repair kit they received that will prevent this issue when installed correctly.
• 10160682Apr 23, 2019Visibility (wipers, defrost, mirrors). This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10160672Apr 16, 2019Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Navigation radio does not have a global positioning system location but OnStar is able to accurately locate the vehicle. Technician should check the installation of the COAX cables to be router correctly. Technician will gain access to the Radio or Human Machine Interface depending on the vehicle build. Install…
• 10160662Apr 12, 2019Electrical system. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
• 10160648Apr 10, 2019Electrical system, Engine. This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0106 and P0506. Technician will inspect for a broken valve spring and replace as needed.
• 10160647Apr 9, 2019Electrical system. This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0106 and P0506. Technician will inspect for a broken valve spring and replace as needed.
• 10160640Apr 8, 2019Engine. This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0106 and P0506. Technician will inspect for a broken valve spring and replace as needed.
• 10160125Apr 8, 2019Brakes. This technical bulletin provides a procedure to validate if the parking pawl actuator is not working as intended, causing the parking pawl to engage while driving.
• 10160633Apr 2, 2019Engine, Electrical system. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
• 10160133Apr 2, 2019Equipment, Transmission and drivetrain. This informational bulletin provides normal operating characteristics and diagnostic information on Manual transmissions.
• 10160114Apr 2, 2019Engine, Transmission and drivetrain. This technical bulletin provides a procedure to replace the rear axle lubricant to correct the noise from the rear axle.
• 10160139Apr 1, 2019Transmission and drivetrain. This engineering information PI is requesting information from the field on the left, right and/or both ground effects rockers that are loose and/or pulling away from the body of the vehicle to determine a root cause.

← All problems reported for the 2018 Chevrolet Camaro