2018 Chevrolet Camaro Technical Service Bulletins

1,278 technical service bulletins (TSBs) are on record for the 2018 Chevrolet Camaro. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10190329Oct 1, 2017Equipment, Back-over prevention (rear camera). Rear View Camera Guidelines Not Present at Times Condition Some customers may report that the Rear View Camera (RVC) guidelines are temporarily not available at times but the RVC will remain on during the concern. Additionally, no related DTCs will be found if this bulletin applies. One example of when this concern may be observed is if a customer quickly starts the car and immediately places the shifter in Reverse…
• 10190320Oct 1, 2017Electrical system, Equipment. IPC Odometer Programming Method Quick Reference Guide
• 10190318Oct 1, 2017Electrical system. All or Some Options May Be Missing from Driver Information Center (DIC) “Info Pages” Menu Due to Them Not Being Selected Condition Some customers may comment that with the “Info” option selected from the main menu (1), the “Info Pages” are blank (2) when scrolling up and down.
• 10190272Oct 1, 2017Wheels, Equipment. Clicking Noise from Front Wheels While Turning at Slow Speeds Condition Some customers may comment on a clicking noise emanating from the front wheels location. This condition may be more predominant at low speeds (10-20 mph or 16-32 km/h) during full wheel lock turns on dry clean pavement. Cause - his may be caused by interaction between the wheel mounting face and the wheel mounting surfaces on the brake rotor…
• 10190270Oct 1, 2017Equipment, Engine. Engine Overheat When Driving Aggressively with Accessory Grille and Outboard Cooler Installed Condition - Some customers may comment on the vehicle overheating when driving aggressively with accessory grille installed in addition to outboard cooler installed. Cause - This may be due to outboard aero blockers restricting airflow to the outboard coolers, causing the vehicle to overheat.
• 10190269Oct 1, 2017Seats, Equipment. Body Creak Noise from Rear Seat Area Condition Some customers may comment on a creak or "itch" type noise from the rear seat area. The noise may be heard during acceleration, braking or when a twist or load is applied to the vehicle Cause: The noise may be caused by either metal contact between two panels or an insufficient bond between the panels. Correction: Spot weld and/or modify two body panels to correct the…
• 10159626Sep 28, 2017Body and structure, Equipment. This informational bulletin provides Information on ZL1 1LE High Wing Rear Spoiler Installed on non ZL1 1LE Models.
• 10157043Sep 28, 2017Engine cooling. This Preliminary Information communication provides the technician with the diagnosis and repair steps for a vehicle with a check engine light on with Diagnostic Trouble Code P015B or a reduced engine power message with Diagnostic Trouble Code P1101. Technician should look for a missing or damaged O-ring seal in the charge air cooler coupler.
• 10157041Sep 28, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical…
• 10159579Sep 26, 2017Engine. This informational bulletin advises the technician not to change the crankshaft balancer if it has the illusion of a wobble or vibration appearance.
• 10159630Sep 21, 2017Transmission and drivetrain. This engineering informational bulletin is requesting information from the field on vehicles that have the condition of a Torque Converter Shudder.
• 10159570Sep 20, 2017Electrical system. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
• 10157024Sep 20, 2017Equipment, Body and structure. This Preliminary Information document communicates direction to the dealership technicians to aid them in diagnosing noise concerns specific to the convertible.
• 10157020Sep 20, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10159614Sep 19, 2017Equipment. This technical bulletin provides repair information to correct a customer concern of the headliner sagging.
• 10159613Sep 19, 2017Electrical system. This informational bulletin provides information for programming the low speed LAN module due to the mirrors memory position reverse tilt position is inoperative.
• 10157016Sep 19, 2017Equipment, Engine cooling. This Preliminary Information communication provides the technician with the diagnosis and repair steps for a vehicle with a check engine light on with Diagnostic Trouble Code P015B or a reduced engine power message with Diagnostic Trouble Code P1101. Technician should look for a missing or damaged O-ring seal in the charge air cooler coupler.
• 10157008Sep 15, 2017Suspension. This Preliminary Information document communicates direction to the dealership technicians to aid them in diagnosing a suspension noise related to these vehicles.
• 10159575Sep 14, 2017Electrical system. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
• 10159572Sep 14, 2017Equipment. This informational bulletin explains the importance of maintaining the vehicle.
• 10159608Sep 12, 2017Electrical system, Engine cooling. This technical bulletin provides a procedure to inspect the wires and/or replace the Valve Rocker Arm Oil Control Valves if the DTCs listed are set.
• 10159606Sep 12, 2017Electrical system. This technical bulletin provides a procedure to reprogram the cluster to correct a condition of Intermittent Blank/Missing Driver Information Center Info Pages Upon Start Up due to a software abnormality.
• 10159569Sep 12, 2017Engine cooling, Equipment. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 10156999Sep 11, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10159578Sep 7, 2017Electrical system, Equipment. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
• 10156990Sep 6, 2017Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
• 10159574Sep 5, 2017Engine. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
• 10156987Sep 1, 2017Transmission and drivetrain. This Preliminary information communicates to the dealer technician that the 10R90 and 10L80 transmissions have been placed on a part exchange. Dealers are to contact the Product Quality Center before replacing the transmission assembly.
• 10140405Aug 31, 2017Brakes. This informational bulletin advises the tech to perform a burnishing on the brakes if the rotors are new.
• 10140293Aug 31, 2017Engine cooling. This informational bulletin provides information on Intake Manifold Inspection/Replacement After Severe Internal Engine Damage.
• 10140298Aug 30, 2017Equipment. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
• 10137747Aug 29, 2017Equipment. This Preliminary Information communication provides information to the technician that when scanning a vehicle for Diagnostic Trouble Codes, may find a temporary loss of Human Machine Interface communication with Global Diagnostic System 2. Technician should not replace the Human Machine Interface for this concern, power cycling of the Human Machine Interface fuse should restore communication.
• 10156984Aug 28, 2017Transmission and drivetrain. 17335-Customer Satisfaction Program. Certain vehicles, equipped with 10-speed automatic transmission (RPO MGL), may have a condition in which the transmission was overfilled during production. If an overfill condition exists the transmission fluid may become aerated and may cause high transmission temperatures, gear slippage, and erratic shifting. In addition, performing limit-handling maneuvers may produce a fluid…
• 10140406Aug 23, 2017Body and structure, Equipment. Thins informational bulletin provides information on Paint-less Dent Repair Process.
• 10140295Aug 22, 2017Electrical system. This informational bulletin provides information on OnStar® VCIM is currently restricted parts. By working closely with our dealers and technicians, through the part restriction process, the General Motors team will gain a better understanding of any field concerns that may develop.
• 10137733Aug 22, 2017Equipment. This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
• 10137727Aug 21, 2017Engine. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10140385Aug 16, 2017Body and structure, Seats. This technical bulletin provides a procedure to weld the rear panels together in the rear of the car to correct the condition of a creak noise due to the contact of two metal panels in the rear of the vehicle.
• 10137722Aug 16, 2017Equipment. The PI was created to advise of an engineering investigation for a concern of unable to connect toOnStar Virtual Advisor when selecting "New Destination" in the OnStar menu.
• 10137712Aug 10, 2017Engine. This Preliminary Information communicates several possibilities of what may be causing a fluctuating tachometer.
• 10137707Aug 10, 2017Transmission and drivetrain. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015–0.0086 inch.
• 10140374Aug 9, 2017Equipment. This informational bulletin provides information for the service parts identification (SPID) label replacement.
• 10137705Aug 9, 2017Equipment. This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
• 10140296Aug 7, 2017Equipment. This warranty administration bulletin provide policy information on required operating procedures.
• 10140299Aug 3, 2017Electrical system. This technical bulletin provides a procedure to perform diagnosis before just replacing the battery sensor module.
• 10137701Aug 3, 2017Equipment, Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have run hot and or has a tick noise. Technician should inspect the head gaskets to ensure are not installed backwards. Technician should replace the head gasket if they are found installed backwards.
• 10140297Aug 2, 2017Equipment. This warranty administration bulletin provide policy information on warranty and policy exchange program for electronic products for U.S. and Canada dealers only.
• 10137697Aug 2, 2017Electrical system. This Preliminary Information communication provides information to the technician that when scanning a vehicle for Diagnostic Trouble Codes, may find a temporary loss of Human Machine Interface communication with Global Diagnostic System 2. Technician should not replace the Human Machine Interface for this concern, power cycling of the Human Machine Interface fuse should restore communication.
• 10137696Aug 1, 2017Brakes. This Preliminary Information communicates information to the servicing technicians for correctly handling complaints of brake noise on this vehicle.
• 10126129Jul 31, 2017Body and structure. This engineering informational bulletin is requesting information from the field on vehicles that have paint concern.

← All problems reported for the 2018 Chevrolet Camaro