2014 Chevrolet Impala Technical Service Bulletins

2,030 technical service bulletins (TSBs) are on record for the 2014 Chevrolet Impala. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10130611Apr 3, 2013Equipment. This preliminary information bulletin is for information on COAX Repair Kit Availability. Revised from PI0572A
• 10254240Apr 1, 2013Equipment. Information on COAX Repair Kit Availability.
• 10250081Apr 1, 2013Transmission and drivetrain. Information on Driveline Clunk Noise
• 10246626Apr 1, 2013Equipment. New Global Labor Codes
• 10246614Apr 1, 2013Electrical system. Vehicle Software Enhancements
• 10246568Apr 1, 2013Transmission and drivetrain. Information on Driveline Clunk Noise
• 10064090Apr 1, 2013Equipment. Summary to be provided on a future date.
• 10052297Apr 1, 2013Electrical system. General motors: on some trucks and passenger vehicles, accessory power outlets (apo) and trailer lighting are common accessed electrical systems that are affected by devices that are plugged in and become inoperative due to an open fuse and no problem with vehicle identified. Models years 2010-2014 trucks and passenger. No models.
• 10134682Mar 27, 2013Electrical system. This technical bulletin provides information on Vehicle Software Enhancements for 2014 and prior GM Passenger Cars and Light Duty Trucks.
• 10134681Mar 26, 2013Equipment. This warranty administration bulletin provide policy information on clarification of use-dealer empowerment labor operations and customer enthusiasm.
• 10134680Mar 26, 2013Electrical system. This informational bulletin provides information accessory power outlet and trailer lighting fuse replacement due to electrical systems that can be affected by devices that are plugged in by the customer.
• 10134676Mar 25, 2013Transmission and drivetrain, Electrical system. This preliminary information bulletin provides information on powertrain and various electronic/electrical control issues.
• 10134675Mar 25, 2013Equipment. This informational bulletin provides information for dealers to properly maintain vehicle in inventory.
• 10134672Mar 22, 2013Seats. This informational bulletin provides information on the proper cleaning products for GM hard or plastic surfaces, seats carpet, vinyl.
• 10112925Mar 20, 2013Electrical system. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicle with ambient temperature reading high in the scan tool data. Vehicles that have a Regular Production Option Code U2E instrument panel cluster do not have an ambient temperature sensor and the data in the scan tool is a default reading.
• 10134664Mar 19, 2013Equipment. This preliminary information bulletin provides a procedure to remove the keyway from the APO harness connector.
• 10134662Mar 19, 2013Transmission and drivetrain, Engine. This informational bulletin provides information of suspected tampering or vehicle modifications for non-GM (Aftermarket) engine and transmission calibrations for V6 and V8 gasoline engines Using Tech 2® or global diagnostic system 2 (GDS 2)
• 10112921Mar 19, 2013Electrical system, Brakes. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have the Antilock Braking System, Service Traction Control System, and/or Service Stabilitrak lights are on. The Electronic Brake Control Module may have one or more of the following Diagnostic Trouble Codes C0035-C0050 with specifically symptom 18, 5A, or 0F. Technician will gain access…
• 10246996Mar 1, 2013Visibility (wipers, defrost, mirrors). Ambient Temperature Sensor Reads High on HVAC Data Lists.
• 10246911Mar 1, 2013Wheels, Back-over prevention (rear camera). EBCM Wheel Speed Sensor Diagnostic Aid for ABS Message
• 10245804Mar 1, 2013Equipment. Aftermarket ALDL or DLC Interface Devices Causing Multiple Issues
• 10073114Mar 1, 2013Equipment. Summary to be provided on a future date.
• 10071589Mar 1, 2013Equipment. Summary to be provided on a future date.
• 10071569Mar 1, 2013Suspension. Summary to be provided on a future date.
• 10112878Feb 22, 2013Equipment. This Preliminary Information communication provides the technician with information on the proper washing of the bright aluminum moldings to avoid the moldings from getting damaged. It is recommended that a non-alkaline solution be used for preparation & washing of the bright aluminum moldings.
• 10112857Feb 13, 2013Electrical system. This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10250083Feb 1, 2013Equipment. Paint-less Dent Repair Process
• 10246570Feb 1, 2013Equipment. Paint-less Dent Repair Process
• 10073141Feb 1, 2013Equipment. Summary to be provided on a future date.
• 10071562Feb 1, 2013Equipment. Summary to be provided on a future date.

← All problems reported for the 2014 Chevrolet Impala