2011 Chevrolet Malibu Technical Service Bulletins

1,305 technical service bulletins (TSBs) are on record for the 2011 Chevrolet Malibu. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10118916Sep 30, 2016Equipment. This warranty administration bulletin provide policy information on warranty and policy exchange program for electronic products for U.S. and Canada dealers only.
• 10118913Sep 30, 2016Equipment. This warranty administration bulletin provide policy information for courtesy transportation and roadside assistance programs.
• 10118912Sep 30, 2016Equipment. This informational bulletin provides information on return or reimbursement of customer owned CDs, DVDs or Navigation Discs .
• 10118907Sep 30, 2016Tires. This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
• 10099532Sep 30, 2016Engine. This preliminary information communication advises the technician about the calculation and operation of the engine oil life monitor. The monitor calculates the percent of oil life remaining, based on 3 pathways. The first pathway for oil life calculation is engine revolutions. The second pathway for oil life calculation is the mileage form the last rest for all general motors powertrains except the volt. The third…
• 10118919Sep 27, 2016Equipment. This warranty administration bulletin provides information on Goodwill Tools, Customer Enthusiasm, and Policy Guidelines.
• 10118918Sep 27, 2016Equipment. This warranty nonadministrative bulletin provides information on the proper use of the labor op 0600014.
• 10097102Sep 26, 2016Equipment. This preliminary information communication provides information to the technician that general motors and general motors of canada company do not support cross border sales. The general motors of canada customer care centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required usa regulatory standards necessary for importation…
• 10118915Sep 22, 2016Equipment. This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
• 10118910Sep 22, 2016Equipment. This informational bulletin provides information on new tools used for the Hem Flanges and how to repair and seal the flanges when the repairs are done.
• 10118908Sep 19, 2016Equipment. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
• 10118914Sep 16, 2016Electrical system. This informational bulletin explains the programming method quick reference guide for the IPC Odometer.
• 10098081Sep 14, 2016Electrical system. This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the onstar module for five minutes. After the power has been removed for five minutes, if the onstar system is working release the vehicle.
• 10099252Sep 9, 2016Engine. This preliminary information communication provides information to the technician about vehicles that have a malfunction indicator lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published service information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed.
• 10118911Sep 1, 2016Fuel system. This informational Bulletin provides Do's and Don'ts for maximizing gasoline engine fuel economy, other various tips and a list of websites for additional information.
• 10082412Aug 31, 2016Electrical system. This technical bulletin provides a procedure to check the cylinders for damaged pistons and determine if the use of aftermarket calibrations or performance parts may be the cause.
• 10083241Aug 30, 2016Electrical system. This preliminary information communication provides information to the technician about the use of j-35616-64b terminal test probe, replacement terminals, and terminated leads. The j-35616-64b is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (j-38125-620h) located in lear tray 7 part number 963716-2.
• 10082869Aug 29, 2016Engine. This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
• 10082506Aug 26, 2016Equipment. This technical bulletin provides a procedure to reprogram the media disc player with the latest calibrations to correct a condition of the rear entertainment system not operating as intended in colder ambient temperature areas due to calibration concerns.
• 10083080Aug 15, 2016Engine cooling. This preliminary information communication provides information to the technician about vehicles that may have low oil pressure message. Technician may also find a diagnostic trouble code p0521 in the engine control module. Technician should follow all published service information diagnosis.
• 10082865Aug 15, 2016Seat belts. This preliminary informational bulletin provides a procedure to reposition the front seat belt latch plate for concerns regarding the seat belt webbing or latch plate coming twisted.
• 10082822Aug 12, 2016Electrical system, Engine. This informational bulletin provides information on how to test a battery and what is needed to warranty a battery.
• 10082363Aug 12, 2016Equipment. This warranty administration bulletin provide policy on performing gm covered vehicle services and maintenance on vehicles originating/sold in canada.
• 10082447Aug 8, 2016Engine cooling. This informational bulletin explains a possible normal whining noise from the balance shaft chain if the vehicle has less than 10,000 miles on it.
• 10082860Aug 3, 2016Equipment. This informational bulletin provides information on gm does not approve the use of “clipping” to repair collision damage to vehicles. Gm has not tested or validated a “clipped vehicle” repair; therefore, gm cannot endorse this type of repair or confirm the crash performance during a subsequent collision.
• 10082861Aug 2, 2016Electrical system. This technical bulletin provides a procedure to remove the transport mode on message displayed in the dic due to vehicles shipped over long distances outside the u.s. And canada.
• 10082823Aug 2, 2016Engine cooling. This informational bulletin explains the use of diesel fuel additives in an engine, are not required unless the customer desires additives to prevent fuel concerns depending on fuel or temperature related conditions.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10082820Aug 1, 2016Engine. This informational bulletins provides information on the intake manifold inspection/replacement after servere internal engine damage.
• 10126063Jul 12, 2016Engine. This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage.
• 10126062Jul 11, 2016Brakes. This informational bulletin provides information on installing the correct tires for vehicles with the condition of under hard acceleration at higher speeds, the traction control light will flash. Or, they may come in for ABS or general handling/braking concerns.
• 10100822Jul 11, 2016Engine. This informational bulletin provides the technician with what may happen to an engine due to lack of maintenance.
• 10089121Jun 29, 2016Tires, Equipment. This informational bulletin provides guidance to gm dealers when using gm approved tire force variation measurement equipment.
• 10081000Jun 29, 2016Engine. This preliminary information communication advises the technician what to inspect if codes p0016 and/or p0017 are setting on a properly timed engine or a condition of the vehicle cranks but will not start. Technician should inspect the respective intake or exhaust camshaft reluctor to see if it has spun on the camshaft. The reluctor cannot be repositioned so the camshaft must be replaced. The new camshafts come…
• 10089222Jun 22, 2016Tires, Equipment. This informational provides information on slight or mild tire feathering and recommended practices.
• 10081510Jun 22, 2016Body and structure, Engine, Equipment. This informational bulletin provides information on new design cylinder heads.
• 10089253Jun 17, 2016Seat belts. This preliminary informational bulletin provides a procedure to reposition the front seat belt latch plate for concerns regarding the seat belt webbing or latch plate coming twisted.
• 10089247Jun 10, 2016Equipment. This informational bulletin provides information on the proper use of floor mats.
• 10089201Jun 8, 2016Equipment. This warranty administration bulletin provides policy information on using gm service policies and procedure manual that represent key gm requirements for service operations.
• 10078571May 1, 2016Equipment. This informational bulletin provide information on the product quality center (pqc) assembly replacement process.
• 10078569May 1, 2016Fuel system, Other or unknown. This informational bulletin provides information on vehicles designed to operate on gaseous fuels.
• 10083898Apr 27, 2016Equipment, Electrical system. This preliminary information communication advises the technician if unable to place an onstar call in the ignition on mode after the onstar canada upgrade, to contact the gm technical assistance center onstar group for further assistance.
• 10083513Apr 27, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of receiving frequent "off route" messages while following turn by turn (tbt) route navigation. The technician is provided instructions for resetting the vehicle communication interface module for this concern.
• 10078745Apr 27, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of receiving frequent "off route" messages while following turn by turn (tbt) route navigation. The technician is provided instructions for resetting the vehicle communication interface module for this concern.
• 10083781Apr 22, 2016Electrical system. This preliminary information communication advises the technician on the steps to diagnose the concern, and the steps to repair the concern of the vehicle cranks but does not start. The technician is to inspect for a sheared cam pin in the engine.
• 10083509Apr 21, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern. The vehicle's xm radio only has xm preveiw channels.
• 10083482Apr 21, 2016Equipment. This preliminary information communication advises the technician to diagnose the concern and the steps to repair the concern. The vehicle's xm travel link may be inopertive.
• 10078522Apr 20, 2016Equipment. "this technical bulletin provides a procedure to contact onstar for hard mute request to correct a customer concern when the radio is on, it does not mute enough when the onstar® turn-by-turn navigation directions are announced due to customer improperly setting the radio volume high enough when the turn-by-turn navigation messages are played. "
• 10078520Apr 20, 2016Electrical system. This informational bulletin provides information that may be useful on diagnosing batteries that have set for a long period of time and/or set in cold weather climates and testing those batteries.
• 10083884Apr 19, 2016Equipment. This preliminary information communication advises the technician on the steps for diagnosing the concern. The vehicle may be unable to connect to onstar using the white, blue or red onstar buttons.

← All problems reported for the 2011 Chevrolet Malibu