2018 Chevrolet MalibuService bulletins
2018 Chevrolet Malibu Technical Service Bulletins
1,066 technical service bulletins (TSBs) are on record for the 2018 Chevrolet Malibu. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.
- 10129894Feb 20, 2018Vehicle speed control, Steering. This Preliminary information communicates the Control Valve Body spacer plate orifice #33 may be restricted as root cause for themay not go above 30 mph, may be stuck in 2nd gear, will not upshift, MIL is on, and/or DTC P2821 concern,to replace the plate as necessary.
- 10137344Feb 15, 2018Electrical system, Engine. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2 9U.S. and Canada
- 10137345Feb 13, 2018Equipment. This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
- 10137320Feb 12, 2018Transmission and drivetrain. This informational bulletin explains a normal characteristic of a trans shift when cold temps are present.
- 10129885Feb 12, 2018Electrical system. This Preliminary Information communication provides information to the technician about vehicles that in the radio settings some of the vehicle personalization selections within the Comfort and Convenience menu are missing at times. Technician will need to perform a scan for Diagnostic Trouble Codes. Technician will need to follow published Service Information diagnostics if there are Diagnostic Trouble Codes…
- 10129869Feb 8, 2018Electrical system. This Preliminary information communicates to replace the valve body and solenoid body assemblies with both spacer plates for a DTC P2820concern if not able to clean the valve body or solenoid body assemblies.
- 10129862Feb 6, 2018Equipment. This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
- 10129860Feb 5, 2018Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have smoke from exhaust system and a coolant loss. Technician will need to replace the Exhaust Heat Exchanger assembly if signs of coolant are found internal after a coolant pressure test.
- 10137341Feb 1, 2018Electrical system, Equipment. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
- 10135159Feb 1, 2018Electrical system, Transmission and drivetrain. 18017 01 - Service Update. An ASIC (Application Specific Integrated Circuit) in the engine control module may not power up correctly preventing the main microprocessor from communicating with ASICs. This can result in a no start, no crank and possible dead battery. Replace the engine control module.
- 10139283Jan 31, 2018Electrical system, Equipment. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
- 10139279Jan 31, 2018Engine cooling. This informational bulletin explains how the catalytic converters may need an inspection, cleaning or replacement if debris have entered the exhaust system.
- 10129105Jan 31, 2018Transmission and drivetrain, Body and structure. This Preliminary information communicates to replace the valve body and solenoid body assemblies with both spacer plates for a DTC P2820concern if not able to clean the valve body or solenoid body assemblies.
- 10139282Jan 29, 2018Electrical system. This informational bulletin provides information to diagnose batteries that have set for a long period of time and/or cold weather climates and testing those batteries.
- 10137163Jan 29, 2018Electrical system, Engine. 18017 - Service Update. An ASIC (Application Specific Integrated Circuit) in the engine control module may not power up correctly preventing the main microprocessor from communicating with ASICs. This can result in a no start, no crank and possible dead battery. Replace the engine control module.
- 10139272Jan 26, 2018Equipment. This informational bulletin provides information retaining to the fact that Service Manuals will now be available on USB.
- 10129097Jan 25, 2018Engine. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
- 10137161Jan 23, 2018Electrical system. 18009 - Service Update. The bootloader version for the engine control module (ECM) was incorrectly released, and may result in a no-start or stall, and P062B, P0171/P0172, P1133/P2195/P2196 or P300 diagnostic trouble codes to set. Dealers are to inspect for part number and replace the ECM as needed.
- 10129089Jan 23, 2018Wheels. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
- 10139254Jan 18, 2018Electrical system. This Bulletin provides ECM reprogramming information to Correct DTC P3260 and P0AC4.
- 10129073Jan 18, 2018Engine. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
- 10139280Jan 17, 2018Visibility (wipers, defrost, mirrors). This warranty bulletin explains how to determine if an outside mirrior was damaged by the customer and what is considered warranty and non-warranty.
- 10139253Jan 17, 2018Engine cooling. This technical bulletin provides a procedure to fill the cooling system if a customer experiences a condition of Gurgle or Water Rush Noise from Dash Area Upon a Stop due to the system not being filled all the way.
- 10129070Jan 16, 2018Engine cooling. This Preliminary information communicates to the technician steps to address the MIL concern on the listed vehicles. It advises that if the vehicle has the code stored, the tech is to perform the SI diagnostic. If the diagnostic fails to isolate the concern, the tech is to clear the code andrelease the vehicle to the customer.
- 10129069Jan 16, 2018Engine cooling. This Preliminary information communicates to look for other codesP0AEE, P0AF3, P0BD2, P0BD7, P0BDC, P0BE1 if a customer comes in with a Mil Request.
- 10139284Jan 12, 2018Engine cooling. This preliminary informational bulletin provides information on Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center.
- 10139277Jan 12, 2018Equipment. This information bulletin provides a procedure on how to remove the paint stain that may present itself under the shipping film.
- 10139278Jan 8, 2018Electrical system, Transmission and drivetrain, Visibility (wipers, defrost…. This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
- 10139276Jan 4, 2018Tires. This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
- 10129051Jan 4, 2018Equipment. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components.
- 10129049Jan 3, 2018Equipment. This Preliminary Information communication provides information to the technician related to vehicles that have a Malfunction Indicator Lamp on. A technician may find Diagnostic Trouble Code P050D set as current or history. The technician is advised to first perform the SI diagnostic. That if the diagnostic fails to isolate the concern, then replace only the exhaust side SHLA's (Stationary Hydraulic Lash…
- 10139225Dec 22, 2017Equipment, Electrical system. This informational bulletin provides information and Tips for Customers Having Difficulty Launching Android Auto or Apple CarPlay.
- 10139214Dec 21, 2017Electrical system, Engine cooling. This technical bulletin provides a procedure for connector kit and ambient air temperature sensor harness replacement due to active shutters being inoperative.
- 10139209Dec 21, 2017Fuel system. This informational bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles.
- 10139193Dec 19, 2017Transmission and drivetrain. This engineering informational bulletin ends the need for information from the field on vehicles that have the condition of Shift to Park Message Displayed.
- 10126985Dec 19, 2017Engine cooling. This Preliminary information communicates to the dealer that the turbocharger wastegate actuator - rod assembly should be replaced as an individual component if found to be broken or damaged. That complete turbocharger replacement is not recommended. To also install the spring washer as directed by 17-NA-007 anytime that the wastegate actuator assembly is replaced.
- 10126982Dec 19, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency…
- 10126973Dec 18, 2017Equipment. This Preliminary Information communication advises the technician how to determine if the vehicle is equipped with wireless fidelity. Technician should check the Regular Production Option Code list for (VV4).
- 10126972Dec 18, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle.
- 10139216Dec 15, 2017Visibility (wipers, defrost, mirrors). This Bulletin provides procedures to correct a condition of Power Foldaway Mirror Glass Shake, Flutter at Normal Driving Speeds
- 10139208Dec 15, 2017Equipment. This warranty administration bulletin provide policy information on required operating procedures.
- 10139167Dec 14, 2017Tires. This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
- 10139179Dec 12, 2017Transmission and drivetrain. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
- 10139212Dec 11, 2017Equipment. This warranty administration bulletin provide policy information for courtesy transportation and roadside assistance programs.
- 10126959Dec 11, 2017Engine cooling. This Preliminary Information communication provides information to the technician related to vehicles that have a Malfunction Indicator Lamp on. A technician may find Diagnostic Trouble Code P050D set as current or history. The technician is advised that if the engine misfires during very specific cold start conditions, to replace only the exhaust side SHLA's (Stationary Hydraulic Lash Adjuster) and to retest…
- 10139185Dec 7, 2017Electrical system. This informational bulletin provides information to diagnose batteries that have set for a long period of time and/or cold weather climates and testing those batteries.
- 10139181Dec 7, 2017Equipment. This informational bulletin provides information on dealer responsibility for cargo carrying capacity labeling and the part numbers for the labels.
- 10126952Dec 6, 2017Engine cooling. This Preliminary Information communication provides information to the technician related to utilizing crankcase pressure testing to aid in engine oil leak diagnostics. The technician is directed to perform the testing and to check related components based on the results.
- 10126951Dec 6, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have a clock that is slow to update while driving when the clock auto set feature enabled. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
- 10139192Dec 5, 2017Transmission and drivetrain. This engineering informational bulletin is requesting information from the filed on vehicles that have the condition of Shift to Park Message Displayed.
← All problems reported for the 2018 Chevrolet Malibu
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Nov 1, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.