2017 Chevrolet Silverado 2500 Technical Service Bulletins

933 technical service bulletins (TSBs) are on record for the 2017 Chevrolet Silverado 2500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10098501Sep 12, 2016Electrical system. This preliminary information communicates that when customer or technician may indicate when attempting to add a new transmitter to a vehicle following the adding transmitters without service programming system procedure. The procedure will not complete and a message "remote learn pending" will be displayed on the driver information center.
• 10082412Aug 31, 2016Electrical system. This technical bulletin provides a procedure to check the cylinders for damaged pistons and determine if the use of aftermarket calibrations or performance parts may be the cause.
• 10083241Aug 30, 2016Electrical system. This preliminary information communication provides information to the technician about the use of j-35616-64b terminal test probe, replacement terminals, and terminated leads. The j-35616-64b is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (j-38125-620h) located in lear tray 7 part number 963716-2.
• 10082277Aug 30, 2016Tires, Equipment. This informational bulletin provides the correct information that is needed to correctly know what tpm sensor is needed to be installed on vehicles if there is accessory wheels installed and who to contact when the accessory wheels will not learn the tpm's to the vehicles.
• 10083325Aug 29, 2016Equipment. This preliminary information communication advises the technician that the human machine interface, radio or tuner, radio controls, integrated center stack, display, and media disc players are placed on restriction through the general motors technical assistance center. Dealer will need to contact general motors technical assistance center for further assistance.
• 10082869Aug 29, 2016Engine. This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
• 10082411Aug 26, 2016Equipment. This technical bulletin provides a procedure to enable the 4g lte wifi on newly delivered vehicles for some vehicles that were not shipped with the feature not enabled.
• 10081880Aug 19, 2016Transmission and drivetrain. This technical bulletin provides the procedures to complete a transsmission adaptive learn on all the different types of vehicles and transmissions based on rpo options to correct a condition of harsh shifts on hard accellerations.
• 10082865Aug 15, 2016Seat belts. This preliminary informational bulletin provides a procedure to reposition the front seat belt latch plate for concerns regarding the seat belt webbing or latch plate coming twisted.
• 10082822Aug 12, 2016Electrical system, Engine. This informational bulletin provides information on how to test a battery and what is needed to warranty a battery.
• 10082363Aug 12, 2016Equipment. This warranty administration bulletin provide policy on performing gm covered vehicle services and maintenance on vehicles originating/sold in canada.
• 10082447Aug 8, 2016Engine cooling. This informational bulletin explains a possible normal whining noise from the balance shaft chain if the vehicle has less than 10,000 miles on it.
• 10083131Aug 5, 2016Electrical system. This preliminary information communication provides the technician with steps on how to program an engine control module when getting a service programming system error code e4491 or e4423. In some cases techline customer support center may need to be contacted to resolve the issue.
• 10082860Aug 3, 2016Equipment. This informational bulletin provides information on gm does not approve the use of “clipping” to repair collision damage to vehicles. Gm has not tested or validated a “clipped vehicle” repair; therefore, gm cannot endorse this type of repair or confirm the crash performance during a subsequent collision.
• 10082437Aug 3, 2016Air bags. This informational bulletin provides information on locating and reconnecting airbag connectors that are not fully seated to correct a customer concern of an airbag warning lamp illuminated, or one, or more, airbag dtc(s) set.
• 10082861Aug 2, 2016Electrical system. This technical bulletin provides a procedure to remove the transport mode on message displayed in the dic due to vehicles shipped over long distances outside the u.s. And canada.
• 10082823Aug 2, 2016Engine cooling. This informational bulletin explains the use of diesel fuel additives in an engine, are not required unless the customer desires additives to prevent fuel concerns depending on fuel or temperature related conditions.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10082422Aug 2, 2016Equipment. This technical bulletin provides diagnostic tips to help correct multiple concerns regarding the usb port being inoperative or unable to play music through the usb port.
• 10082820Aug 1, 2016Engine. This informational bulletins provides information on the intake manifold inspection/replacement after servere internal engine damage.
• 10089121Jun 29, 2016Tires, Equipment. This informational bulletin provides guidance to gm dealers when using gm approved tire force variation measurement equipment.
• 10081022Jun 14, 2016Electrical system. This preliminary information communication advises the technician that ,when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10089201Jun 8, 2016Equipment. This warranty administration bulletin provides policy information on using gm service policies and procedure manual that represent key gm requirements for service operations.
• 10118547May 20, 2016Tires. This informational bulletin provides information on the temporary tire flat spotting condition.
• 10118546May 16, 2016Equipment. This informational bulletin provides information on a new U.S. dealer special tool loan program.
• 10118545May 16, 2016Electrical system, Equipment. This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
• 10083513Apr 27, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of receiving frequent "off route" messages while following turn by turn (tbt) route navigation. The technician is provided instructions for resetting the vehicle communication interface module for this concern.
• 10083509Apr 21, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern. The vehicle's xm radio only has xm preveiw channels.
• 10083482Apr 21, 2016Equipment. This preliminary information communication advises the technician to diagnose the concern and the steps to repair the concern. The vehicle's xm travel link may be inopertive.
• 10083512Apr 5, 2016Visibility (wipers, defrost, mirrors), Equipment. This preliminary information communication advises the technician the steps on diagnosing the concern. Vehicle's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10116914Feb 23, 2016Wheels, Tires. This informational bulletin provides information on the proper mounting paste to apply to tires when mounting and balancing them to prevent conditions like Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel)
• 10116912Feb 22, 2016Equipment. This informational bulletin provides Information Regarding Servicing Components Located Near SIR Components and how to properly disable the SIR system for repairs at or near
• 10253146Jan 1, 2013Engine cooling. Power On Acceleration After Cold Start.

← All problems reported for the 2017 Chevrolet Silverado 2500