2019 Chevrolet Silverado 2500 Technical Service Bulletins

1,059 technical service bulletins (TSBs) are on record for the 2019 Chevrolet Silverado 2500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10178294Jun 3, 2020Electrical system. This engineering informational bulletin is requesting information from the technicians for the following conditions for the cluster.
• 10178291Jun 2, 2020Equipment. This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
• 10176634May 29, 2020Brakes. This technical bulletin provides a procedure for pad replacement due to on premature and/or uneven brake pad wear.
• 10176645May 28, 2020Engine. This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 10176613May 28, 2020Engine cooling. This technical bulletin provides a service procedure to correct a condition of Ticking Noise from the Engine.
• 10176823May 27, 2020Fuel system, Equipment, Engine cooling. Customer Satisfaction Program - Certain vehicles equipped with the 6.6l Duramaxdiesel engine (RPO L5P) and optional engine-block heater cord, may have a condition in which the block heater cable function was disabled. Dealers will replace the engine block heater and cord.
• 10176650May 27, 2020Engine. This informational bulletin explains the normal noises an engine may make when the ambient temperature outside is cold or the vehicle has sat for a few hours.
• 10176647May 27, 2020Equipment, Electrical system. This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
• 10176657May 26, 2020Electrical system. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to Shift to Park Message on Drivers Information Center (DIC) (ONLY On Push Button Ignition), Unable to Remove Key from Ignition Cylinder and/or Difficult to Shift Out of Park.
• 10176649May 20, 2020Electrical system. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
• 10176620May 20, 2020Engine cooling. This technical bulletin provides a procedure to replace the cooling fan if found contacting the shroud causing the customers concern.
• 10176315May 13, 2020Electrical system. This Preliminary information communicates Some customers may comment that the SES lamp is illuminated or was Illuminated and turned off. During inspection Technician may notice DTC P1682 (Ignition 1 Switch Circuit 2) active or stored in history. DTC?s P0101, P0689. P16A7 or P16BC may also be active or stored in history. Additionally, vehicle may have been into the dealer on a prior service visit and had the MAF…
• 10176313May 13, 2020Tires. This Preliminary Information communication provides information to the technician that some owners of Heavy Duty Trucks and Utilities may ask if they can lower their tire pressures. Tire pressures being set to the "Tire and Loading Label" will ensure the safe handling and ride characteristics of the truck and should not be lowered.
• 10176656May 12, 2020Electrical system. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to Shift to Park Message on Drivers Information Center (DIC) (ONLY On Push Button Ignition), Unable to Remove Key from Ignition Cylinder and/or Difficult to Shift Out of Park.
• 10176655May 12, 2020Electrical system. This engineering information (EI) is requesting information from technicians to perform the checklist provided and contact the engineer listed in regards to Shift to Park Message on Drivers Information Center (DIC) (ONLY On Push Button Ignition), Unable to Remove Key from Ignition Cylinder and/or Difficult to Shift Out of Park.
• 10176619May 8, 2020Equipment, Fuel system. This technical bulletin provides a procedure to replace the fuel tank, sending unit and install a piece of fuel hose to the vent and route down the fuel feed line and secure with zip ties.
• 10176308May 8, 2020Electrical system, Body and structure. This Preliminary Information communication provides information to the technician to help converting vehicles to fleet key option Regular Production Option Code 6E2 or 6E8. Technician will need to check the Regular Production Option Code for 6E2 or 6E8. Technician will need to order the correct key part number per the Regular Production Option Code. Then the technician will need re-code the lock cylinders to match…
• 10176644May 7, 2020Equipment. This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
• 10176646May 6, 2020Equipment, Electrical system. This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
• 10176632May 5, 2020Fuel system, Engine. This informational bulletin explains to the tech on how to order a new fuel injector by matching the part number on the part and ordering it from the EPC.
• 10176651May 4, 2020Engine. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
• 10176630May 4, 2020Engine cooling, Electrical system. This informational bulletin provides a way for the technician to identify if the ECM has been modified.
• 10176627May 4, 2020Engine, Electrical system. This technical bulletin provides a procedure to program the ECM to correct the customers concern.
• 10176625May 4, 2020Electrical system, Engine. This technical bulletin provides a procedure to program the ECM to correct the customers concern.
• 10176624May 4, 2020Engine cooling. This informational bulletin advises the technician to not replace the TMAP sensor, clean it using air or harsh chemicals but allow time for the sensor to thaw.
• 10176611May 4, 2020Equipment, Engine, Fuel system. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal.
• 10175850Apr 29, 2020Tires, Equipment. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
• 10175853Apr 28, 2020Equipment. This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
• 10175746Apr 28, 2020Equipment, Electrical system. This Warranty Administration Bulletin Provides High Voltage Battery Exchange Process Information.
• 10174864Apr 28, 2020Equipment. This Preliminary Information communication advises the technician that some vehicles may have a dim Driver Information Center when the interior of the vehicle is hot from a sun load or extended heater operation. The Driver Information Center is designed to dim with high temperature exposure. This is done to protect the Driver Information Center from damage.
• 10174860Apr 27, 2020Engine cooling. This Preliminary information communicates the possibility of dtc P12A6 with the possibility of a crank no start or extended crank concern.
• 10174859Apr 27, 2020Electrical system. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
• 10175858Apr 20, 2020Equipment, Transmission and drivetrain. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a Service 4WD message being visible on the driver information center (DIC).
• 10174826Apr 17, 2020Engine cooling. This Preliminary information communicates the possibility of dtc P12A6 with the possibility of a crank no start or extended crank concern.
• 10175855Apr 14, 2020Equipment, Body and structure. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
• 10174818Apr 14, 2020Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10175852Apr 3, 2020Equipment. This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
• 10175748Apr 1, 2020Transmission and drivetrain. This technical bulletin provides a procedure to validate if the parking pawl actuator is not working as intended, causing the parking pawl to engage while driving.
• 10174304Mar 31, 2020Equipment. This warranty administration bulletin explains to the technician that when using wiring repair labor operations, additional information may be needed when submitting Global Warranty transactions when doing wiring repairs.
• 10174296Mar 31, 2020Transmission and drivetrain. This technical bulletin provides a procedure to replace the 4 5 6 clutch housing if the bushing was found worn and the cause of the customers concern.
• 10173960Mar 28, 2020Electrical system. Customer Satisfaction Program - Certain vehicles may have a condition in which the electronic brake controlmodule is less likely to activate the optional integrated brake assist. Normal braking capability functions as intended. Dealers are to reprogram the front view camera by performing the SPS Programming/SPS Configuration/GDS2 Learn.
• 10174448Mar 25, 2020Other or unknown. This engineering information (EI) is requesting information from technicians to perform the checklist provided and contact the engineer listed in regards to a Check Trailer Message on Drivers Information Center (DIC) and/or F74, F82 Fuses Blown.
• 10174446Mar 24, 2020Equipment. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards on a Service 4WD message being visible the driver information center (DIC).
• 10174302Mar 20, 2020Equipment. This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
• 10174303Mar 18, 2020Equipment. This warranty administration bulletin provides policy information for courtesy transportation and roadside assistance programs.
• 10174305Mar 17, 2020Engine cooling. This informational bulletin explains the normal noises an engine may make when the ambient temperature outside is cold or the vehicle has sat for a few hours.
• 10173683Mar 11, 2020Electrical system. This Preliminary information communicates a customer concern of IPC gauges inoperative or fluctuate, No Start, No Crank, SIR Light / Service Airbag Message, Service Suspension Message, Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback, HVAC controls inoperative.
• 10174440Mar 10, 2020Equipment, Lane departure. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Instrument Panel Cluster (IPC) Gages at Zero, Multiple Warning Lights On, No Chimes and/or Turn Single Audio.
• 10174306Mar 9, 2020Back-over prevention (rear camera), Engine. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
• 10174299Mar 6, 2020Equipment. This informational bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).

← All problems reported for the 2019 Chevrolet Silverado 2500