2020 Chevrolet Silverado 2500 Technical Service Bulletins

1,397 technical service bulletins (TSBs) are on record for the 2020 Chevrolet Silverado 2500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10253061Mar 4, 2024Brakes, Fuel system. This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
• 10253060Mar 4, 2024Equipment. This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time.
• 10251635Mar 4, 2024Equipment. This service bulletin provides information on All hazmat parts being returned to the Warranty Parts Center (WPC) must be shipped using Central Transport. Hazardous materials should never be sent by air transportation to the WPC.
• 10251513Mar 1, 2024Other or unknown. This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
• 10251357Feb 26, 2024Engine cooling. This technical bulletin provides repair information to correct a customer concern of Evaporative DTCs P0442, P0446, P0455 or P0449, Caused by Dust Intrusion into the Evaporative Canister.
• 10251712Feb 23, 2024Engine cooling. This Preliminary information communicates that some customers may comment that after an auto-stop event the engine does not restart and to inspect the engine ground strap. Temporarly on hold while PIE0572 is active. PIE0572 has now ended and reinstating the PI.
• 10250789Feb 23, 2024Engine cooling. This service bulletin provides a repair procedure to correct customer concerns of Service Emissions System Displayed on DIC, MIL Illuminated with DTC P249C and/or P20E8 Set.
• 10250775Feb 22, 2024Engine cooling. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10251709Feb 21, 2024Electrical system, Lane departure. This Preliminary information communicates information on how to disable the Side Blind Zone Detection and Park Assist systems when a customer removes the pickup box from the vehicle to install an aftermarket bed or body.
• 10251708Feb 21, 2024Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10251704Feb 21, 2024Forward collision avoidance. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
• 10250774Feb 20, 2024Transmission and drivetrain. This technical bulletin provides a procedure to inspect the front pump of the transmission for a possible leak.
• 10250582Feb 14, 2024Transmission and drivetrain, Electrical system, Equipment, Steering. This service bulletin helps diagnose/reduce possible CCND issues on Transfer Cases - Service 4WD on DIC, Intermittent Failures, Noise Concerns, Driveline/Steering Vibration/Shudder, Intermittent DTCs/MIL Illuminated, Engagement/Disengagement/Ratcheting Concerns.
• 10250747Feb 12, 2024Engine cooling, Electrical system. This service bulletin provides a repair procedure to correct customer concerns of Service Emissions System Displayed on DIC, MIL Illuminated with DTC P249C and/or P20E8 Set.
• 10250505Feb 7, 2024Engine cooling, Fuel system. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
• 10250503Feb 7, 2024Engine cooling. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
• 10251685Feb 6, 2024Brakes. This Preliminary Information communication provides information to the technician about fluid leaking from the brake caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston installation. This grease can be cleaned off and the rest of the service completed.
• 10250507Feb 5, 2024Engine cooling, Electrical system. This technical bulletin provides a procedure to program the Reductant Control Module and Setup and Perform the Reductant Fluid Tank Level Reset.
• 10251681Feb 2, 2024Tires. This Preliminary Information communication provides information to the technician that some owners of Heavy Duty Trucks and Utilities may ask if they can lower their tire pressures. Tire pressures being set to the "Tire and Loading Label" will ensure the safe handling and ride characteristics of the truck and should not be lowered.
• 10250347Feb 2, 2024Transmission and drivetrain, Engine cooling. This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
• 10250006Jan 31, 2024Equipment. This Preliminary information communicates to dealers of a known issue with failed map update
• 10250276Jan 30, 2024Electrical system, Equipment. This service bulletin provides information on the EL-52800 Diagnostic & Charge Battery Station (DCBS) – FAQs.
• 10250002Jan 30, 2024Electrical system. This Preliminary information communication provides information to the technician on installing Regular Production Option Code 9L7 Up-fitter Auxiliary Switches. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 153. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
• 10250278Jan 29, 2024Equipment, Electrical system. This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present on network communication circuits.
• 10249999Jan 29, 2024Transmission and drivetrain. This Preliminary information communicates that the tool for the HD transfer cases to install the input seal during a repair is incorrect and a new tool is in development.
• 10250250Jan 22, 2024Transmission and drivetrain, Equipment. This technical bulletin provides a procedure to inspect the front pump of the transmission for a possible leak.
• 10249713Jan 19, 2024Electrical system, Engine cooling. This technical bulletin provides repair information to correct a customer concern of 2020 - 2022 Silverado and Sierra Equipped with Diesel Engine Setting DTCs P20BB or P20C3.
• 10250244Jan 18, 2024Body and structure. This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
• 10249745Jan 18, 2024Body and structure. This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
• 10249712Jan 17, 2024Transmission and drivetrain, Equipment. This service bulletin provides a Diagnostic Tip for Noise, Vibration, and/or Harshness Issues/Clunk Noise Heard During Coast Down Event after the transfer case was removed from the transmission and reinstalled during a recent repair.
• 10249946Jan 16, 2024Engine cooling. This bulletin advises the tech to inspect deeper into what may be to main cause of an engine failure.
• 10249590Jan 16, 2024Equipment. This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
• 10249980Jan 12, 2024Equipment. This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be…
• 10249579Jan 12, 2024Engine cooling, Transmission and drivetrain. This PI bulletin advises the technician on the proper way to install the pistons in an engine.
• 10249011Jan 12, 2024Exterior lighting. This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
• 10249034Jan 11, 2024Electrical system, Equipment, Other or unknown. This informational bulletin advises the technician to check for faults that may be caused by the trailer otherwise found by a possible faulty trailer connector.
• 10249971Jan 10, 2024Fuel system. This Preliminary Information communication provides information to the technician about vehicles that may have a bump feel or clunk noise at a stop or on launch. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle. The bump clunk issue may be due to fuel movement in the fuel tank when not completely full. The condition is eliminated after completely filling…
• 10249969Jan 9, 2024Electrical system. This Preliminary information communicates diagnostic tips when trying to root cause a SES MIL with DTC's B2B0D and B2B0E. Main cause is aftermarket electrical devices spliced into the ignition main fuses.
• 10249968Jan 9, 2024Electrical system. This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
• 10249965Jan 9, 2024Exterior lighting. This Preliminary information provides information to the technician on installing a roof beacon light. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 157. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
• 10249535Jan 8, 2024Electrical system. This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961).
• 10249005Jan 4, 2024Fuel system, Electrical system, Engine cooling. This technical bulletin provides a procedure to program the Reductant Control Module and Setup and Perform the Reductant Fluid Tank Level Reset.
• 10249008Jan 3, 2024Equipment, Transmission and drivetrain, Steering, Electrical system. This service bulletin helps diagnose/reduce possible CCND issues on Transfer Cases - Service 4WD on DIC, Intermittent Failures, Noise Concerns, Driveline/Steering Vibration/Shudder, Intermittent DTCs/MIL Illuminated, Engagement/Disengagement/Ratcheting Concerns.
• 10249004Jan 3, 2024Transmission and drivetrain. This technical bulletin provides a procedure to inspect the front pump of the transmission for a possible leak.
• 10248709Dec 21, 2023Fuel system, Engine cooling, Electrical system. This technical bulletin provides a procedure to program the Reductant Control Module and Setup and Perform the Reductant Fluid Tank Level Reset.
• 10249298Dec 20, 2023Electrical system, Back-over prevention (rear camera). This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
• 10249295Dec 18, 2023Equipment. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10249294Dec 15, 2023Other or unknown, Electrical system. This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses.
• 10247552Dec 12, 2023Equipment. This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
• 10247192Dec 8, 2023Equipment, Engine cooling, Electrical system. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.

← All problems reported for the 2020 Chevrolet Silverado 2500