2005 Chevrolet Silverado 3500 Technical Service Bulletins

223 technical service bulletins (TSBs) are on record for the 2005 Chevrolet Silverado 3500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10139199Jan 6, 2015Suspension. This informational bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns.
• 10126237Dec 11, 2014Visibility (wipers, defrost, mirrors). This informational bulletin provide information for the technicians to repair the rear window defroster contact or tabs.
• 10126231Dec 10, 2014Equipment. This information provides the proper way to install the floor mats .
• 10247716Dec 1, 2014Electrical system, Equipment. J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
• 10247061Dec 1, 2014Electrical system. J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
• 10252163Nov 1, 2014Equipment. XM Audio Traffic And Travel Link Availability And Operation.
• 10247748Nov 1, 2014Electrical system. Speedometer Needle Accuracy Information.
• 10247093Nov 1, 2014Electrical system. Speedometer Needle Accuracy Information.
• 10247063Nov 1, 2014Visibility (wipers, defrost, mirrors). A/C Blows Warm Or Poor Performance.
• 10245951Nov 1, 2014Equipment. Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
• 10112251Sep 24, 2014Engine cooling. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10246647Sep 1, 2014Brakes. Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
• 10112160Aug 8, 2014Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
• 10112144Jul 31, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicle that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
• 10112137Jul 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10112116Jul 17, 2014Engine cooling. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10137833Jul 16, 2014Equipment, Engine cooling. This information bulletin advises of a new tool used to aid in installing Duramax glow plugs.
• 10246499Jul 1, 2014Electrical system, Fuel system, Equipment, Other or unknown. Duramax® Diesel Glow Plugs Difficult to Install Due to Carbon Buildup - New Glow Plug Bore Reamer Available
• 10248444Jun 30, 2014Equipment. Vehicle Recalls
• 10126308Jun 26, 2014Suspension. This informational bulletin was created to aid the technician in diagnosing the difference between a shock or strut that has a fluid residule from a possible external source from a leaking shaft seal.
• 10126291Jun 18, 2014Visibility (wipers, defrost, mirrors). This preliminary bulletin provides a procedure on how to reset the power folding mirriors after they been folded manually, to fix the customers concern of the mirriors shaking or fluttering at normal driving speeds.
• 10126285Jun 16, 2014Equipment. This preliminary bulletin provides procedures on how to reset or refresh the XM radio receiver is the customers states that they only get a few channels.
• 10126280Jun 13, 2014Equipment. This preliminary bulletin provides a information to the dealer for the requirements need for equipment.
• 10246952Jun 1, 2014Equipment. Programming And Activation Of Replacement OnStar Modules.
• 10137932May 28, 2014Electrical system, Equipment. This warranty bulletin explains how to use the EL-50313 Midtronic GR8 Battery tester to test a battery and determin if it is warranty or not.
• 10246624May 1, 2014Equipment. Car and Truck Fix it Right the First Time Issues
• 10246646Apr 1, 2014Brakes. Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
• 10247681Mar 1, 2014Equipment. Information On Requests To Add OnStar Bluetooth Option.
• 10245950Mar 1, 2014Equipment. Canadian Customers Unable To Place Calls In The United States
• 10190932Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10190931Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10190934Jan 1, 2014Body and structure, Equipment. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the…
• 10190933Jan 1, 2014Equipment, Body and structure. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the…
• 10246645Nov 1, 2013Brakes. Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
• 10112331Nov 1, 2013Engine cooling. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10246631Sep 1, 2013Engine cooling. Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
• 10139080May 31, 2013Brakes, Equipment. This informational bulletin provides information for Disc Brake Warranty Service and Procedures.
• 10139078May 30, 2013Transmission and drivetrain, Equipment. This informational bulletin provides information for Automatic Transmission Oil Cooler Flow Test Essential Tool J-45096 TransFlow.
• 10139066May 23, 2013Engine cooling, Equipment. This informational bulletin provides information for Engine Squealing Type Noise on Start-up or Vibration Condition.
• 10139059May 21, 2013Equipment. This informational bulletin provides a revision for 02-08-98-002C to add the 2010-2013 model years and revise the Approved Refinish Materials booklet information.
• 10139057May 20, 2013Equipment. This informational bulletin provides a revision for 09-00-89-008 to add model years, update the Labor Operation Information and Transaction Submissions Procedure and general content updates.
• 10139052May 17, 2013Wheels, Equipment. This informational bulletin provides a revision for 07-03-10-015B to add the 2013-2014 model years and remove the Saab Warranty Information.
• 10139049May 16, 2013Equipment, Visibility (wipers, defrost, mirrors). This informational bulletin provides a revision for 05-08-48-001B to add 2010-2014 model years and update Labor Operation.
• 10139043May 14, 2013Equipment, Electrical system. This informational bulletin provides a revision for 13-00-89-004A to include updated information.
• 10139041May 14, 2013Equipment, Wheels. This informational bulletin provides a revision for 05-03-07-009E to add the 2014 model year and update the Labor Operations.
• 10139039May 13, 2013Electrical system, Equipment, Engine cooling. This informational bulletin provides a revision for 06-00-89-026J to add the 2014 model year and update the labor operations.
• 10139036May 10, 2013Transmission and drivetrain, Equipment. This informational bulletin provides a revision for 09-07-30-018C to add the 2014 model year and update the Labor Operation.
• 10139024May 6, 2013Electrical system, Equipment. This informational bulletin is a revision for 09-00-89-016B to add the 2014 model year and update the labor operation.
• 10112857Feb 13, 2013Electrical system. This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10247747Jan 1, 2013Electrical system. Speedometer Needle Accuracy Information

← All problems reported for the 2005 Chevrolet Silverado 3500