2010 Chrysler 300 Engine cooling Problems
- Complaints
- 3about this part
- Share
- 2%of 123 total for the year
- Median mileage
- 38,000miles
- Trend
- Not enough dataFewer than 15 complaints, too few for a reliable trend.
NHTSA recorded 3 complaints about the engine cooling of the 2010 Chrysler 300, 2% of the 123 complaints for this model year. Where a mileage was given, the median is 38,000 miles. 1 a fire, according to the filers.
Fewer than 15 complaints name this part, so treat the figures as a rough indication only.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“The contact owns a 2010 Chrysler 300. The contact stated that the vehicle would stall without warning. After some of the occurrences, the vehicle would not restart for approximately 15 to 20 minutes. The vehicle was taken to an authorized dealer on several occasions, but they were unable to remedy the failure. The failure mileage was 38,000 and current mileage 42,000.”
NHTSA complaint #10415217, filed 2011-07, 38,000 milesRelated service bulletins
- 10227983Apr 2, 2022If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10220687Mar 6, 2022Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter…
- 10212290Mar 6, 2022Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter…
- 10215879Jan 16, 2021Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter…
- 10187058Jan 16, 2021Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter…
- 10121927Jan 26, 2016NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also…
- 10223599Feb 11, 2015Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid…
- 10136933Feb 12, 2014Part Description: Short Runner Valve (Actuator) Issue Description: Issue 1~ JC,JS '08-09MY 3.5L only~ Caution - Do not replace the intake manifold for a short runner valve (SRV)…
- 10188677May 15, 2013Flash: Performance Derate Above 55 MPH Immediately After Start-Up When Accelerating At Wide Open Throttle This bulletin involves selectively erasing and reprogramming the…
- 10140065Feb 6, 2013Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure…
Engine cooling: other model years
Other parts of the 2010 Chrysler 300
57 complaintsElectrical system
23 complaintsEngine
11 complaintsFuel system
8 complaintsOther or unknown
8 complaintsVehicle speed control
7 complaintsBody and structure
6 complaintsElectronic stability control
5 complaintsExterior lighting
4 complaintsTransmission and drivetrain
4 complaintsWheels
4 complaintsBrakes
3 complaints
← All problems reported for the 2010 Chrysler 300
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 27, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology