1986 Chrysler Lebaron Recalls
NHTSA lists 4 recall campaigns for the 1986 Chrysler Lebaron. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.
- Fuel system, gasolineCovers: Chrysler Lebaron 1985–1987, Dodge 600 1985–1987, Chrysler NEW Yorker 1985–1987 +8 more
Reported issue: Fuel leakage may occur in low ambient temperature operation at connections of an engine compartment fuel supply hose to the pressure regulator and to the fuel rail.
Possible consequence: In the presence of an ignition source, fuel leakage couldresult in a fire.
Remedy: Relocate pressure regulator; replace fuel supply with formed hose with revised routing configuration to ensure sealing integrity.
- Seats › Front assembly › Power adjustCovers: Chrysler Lebaron 1985–1986, Dodge 600 1985–1986, Plymouth Caravelle 1986 +1 more
Reported issue: A service replacement drivers seat cushion (manual seat type) may contain wrong cushion with a brace that could interfere with power seat adjuster mechanism and cause stress on the frame.
Possible consequence: Seat frame could fracture and result in significantrearward movement of the seat back.
Remedy: Replace frame with proper power seat frame.
- Electrical system › 12v/24v/48v batteryCovers: Chrysler Lebaron 1986, Dodge Aries 1986, Plymouth Reliant 1986 +11 more
Reported issue: Battery cap vents may be partially or completely blocked with plastic flashing. Consequence of defect: a build up of internal gas pressure could occur which could result in case rupture, particularly during post charging. Should a person be in the vicinity of the battery when the case ruptures, they may be injured by the released gases and/or acid.
Remedy: Rework batteries by probing both vent orifices to eliminate any vent obstruction.
- Electrical system › Wiring › Interior/under dashCovers: Chrysler Lebaron 1986, NEW Yorker 1986, Dodge 600 1986
Reported issue: A resistor in the electronic panel cluster may be subjected to an electrical current overload due to failure of a switching transistor. Consequence of defect: the overheated resistor could ignite and start an instrument panel fire.
Remedy: Modify instrument panel cluster by replacing the resistor with a fused resistor that will not ignite if overloaded.
← All problems reported for the 1986 Chrysler Lebaron
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 30, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.