1992 Dodge Daytona Recalls

NHTSA lists 2 recall campaigns for the 1992 Dodge Daytona. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 93V114000Jul 12, 199317,000 vehicles potentially affected
  Structure › Frame and members
  Covers: Dodge Daytona 1992–1993

  Reported issue: The welding attachments of the front frame rails to the floor pan sheet metal may not be properly welded.

  Possible consequence: The improperly welded areas could cause body panelflexing and sheet metal cracking, possibly resulting in structural damage,compromising the vehicle impact protection capability. This could increase thelikelihood of injury to occupants if the vehicle is involved in a collisionaccident.

  Remedy: Secure the floor pan to the front frame rails by bolting both frame rails to the floor pan.

  Full campaign details →

• 92V015000Feb 14, 199220,000 vehicles potentially affected
  Steering › Steering wheel/handle bar
  Covers: Dodge Daytona 1992, Caravan 1992, Plymouth Acclaim 1992 +10 more

  Reported issue: The zinc plating operation performed on the upper steering column shaft coupling bolt caused hydrogen embrittlement and breakage of the bolt.

  Possible consequence: Fractures of the upper steering column shaft couplingbolt result in a lack of coupling load on the shaft and loss of steeringcontrol.

  Remedy: Replace the zinc plated bolt with a phosphate plated bolt.

  Full campaign details →

← All problems reported for the 1992 Dodge Daytona