2000 Dodge RAM Recalls
NHTSA lists 6 recall campaigns for the 2000 Dodge RAM. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip › Control unit/moduleCovers: Dodge RAM 1998–2003
Reported issue: On certain van and wagon vehicles equipped with 4-wheel antilock brake systems (abs), aftermarket batteries may leak electrolyte onto the abs control module connector, which can compromise sealing integrity of the connector.
Possible consequence: This may allow development of a short circuit in the connector, which could eventually lead to a fire.
Remedy: Dealers will inspect the abs control module connector for electrolyte damage and replace the connector as necessary. The recall will begin on september 27, 2004. Owners should contact daimlerchrysler at 1-800-853-1403.
- Electrical system › WiringCovers: Dodge RAM 2000–2001
Reported issue: Vehicle description: vans and wagons not equipped with power front seats. In the presence of road salt, water, and possibly other debris, the power seat connector located beneath the driver's seat could develop a high resistive short circuit that cycles the circuit breaker.
Possible consequence: If the circuit breaker cycles for an extended period of time, heat could build up in the connector, possibly resulting in a fire.
Remedy: Owners will receive instructions for removing the circuit breaker from the fuse panel. If an owner desires, their dealer can perform the repair. Owner notification began august 27, 2001. Owners who do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-853-1403.
- Air bagsCovers: Dodge RAM 1997–2001, Dakota 1997–2000, Durango 1997–2000 +3 more
Reported issue: Vehicle description: pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: the ram pickup trucks were built at the warren assembly plant ("s" in the 11th vin position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in the 11th vin position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m"…
Possible consequence: When this occurs, the material could interfere with the clockspring ribbon and cause an open circuit. The driver air bag system will become disabled, and the air bag warning lamp will illuminate on the instrument panel.
Remedy: Dealers will replace the clockspring assembly. Owner notification began june 18, 2001. Also some 1997-200 model year vehicles that, according to warranty records, have had a suspect replacement clockspring installed, will also be included in this campaign. Owners who take their vehicles to an authorized dealer on an…
- Service brakes, hydraulic › Foundation components › Hoses, lines/piping, and fittingsCovers: Dodge RAM 2000
Reported issue: Vehicle description: pickup trucks equipped with an anti-lock braking system (abs). Some vehicles may have inadequate clearance between the front tire/wheel and the brake hose/abs sensor wire assembly. During full lock turns, it is possible for the tire or wheel to contact the brake hose/abs sensor wire assembly.
Possible consequence: This could ultimately result in wire damage and/or a hole in the brake line, affecting brake effectiveness, increasing the risk of a crash.
Remedy: Dealers will replace the front brake hose assemblies, and the abs sensor wire will be inspected and replaced if necessary. Owner notification began march 8, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should…
- Trailer hitchesCovers: Dodge RAM 1998–2000
Reported issue: Vehicle description: pickup trucks equipped with optional trailer hitch. The trailer hitch side brackets were manufactured using material with insufficient strength.
Possible consequence: Brackets built without proper material could fatigue and fracture in the area where the trailer hitch mounts to the frame.
Remedy: Dealers will inspect the trailer hitches and replace any trailer hitch showing signs of fatigue cracking. If no evidence of cracking exists, the dealer will install two reinforcement brackets.
- Suspension › Front › Control arm › Lower armCovers: Dodge RAM 2000
Reported issue: Vehicle description: light duty pickup trucks. The welds at the right side lower control arm bracket to axle tube attachment may have inadequate fatigue life due to poor weld quality. This can lead to separation of the control arm bracket from the axle tube.
Possible consequence: If the bracket separates the vehicle could experience reduced directional stability, braking degradation and/or vehicle pull under braking.
Remedy: Dealers will replace the front axle with a properly welded front axle.
← All problems reported for the 2000 Dodge RAM
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 28, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.