2019 Genesis G70 Technical Service Bulletins

59 technical service bulletins (TSBs) are on record for the 2019 Genesis G70. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10167253Oct 14, 2019Equipment. This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
• 10253026Sep 30, 2019Transmission and drivetrain. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace…
• 10253043Jun 12, 2019Transmission and drivetrain. This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
• 10253025Jun 4, 2019Transmission and drivetrain. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
• 10253042Apr 15, 2019Transmission and drivetrain. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality.  Before replacing an automatic transmission: Input the data into the TCU using the GDS.  Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
• 10160098Apr 15, 2019Electrical system, Transmission and drivetrain. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
• 10253024Apr 8, 2019Transmission and drivetrain. When servicing a vehicle with a “Check Engine light” and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
• 10253011Dec 3, 2018Brakes. This bulletin describes the procedure to inspect and repair brake pulsation on dealer stock vehicles only. The procedure described should be performed just prior to retail sale.
• 10253010Oct 24, 2018Body and structure, Equipment. G70 vehicles include a Design Edition trim level that is equipped with cream beige colored floor carpet and floor mats. This bulletin describes the procedure to apply protectant to the cream beige color carpet and floor mats before vehicle retail sale to customer. It is recommended to apply protectant to aide in prevention of soils and stains.

← All problems reported for the 2019 Genesis G70