2017 GMC Savana Technical Service Bulletins

1,158 technical service bulletins (TSBs) are on record for the 2017 GMC Savana. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10123270Oct 20, 2017Equipment. This Preliminary Information communication advises the technician that the Product Quality Center has a part restriction for the 8L45 and 8L90 park actuator rod. The dealer technician is advised to call the GM Product Quality Center for further assistance.
• 10134612Oct 17, 2017Back-over prevention (rear camera). This informational bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option.
• 10134570Oct 16, 2017Electrical system, Equipment, Engine cooling. This Technical bulletin provides information for reprogramming the HVAC system control module due to the air conditioning not blowing cold because of software anomaly.
• 10134593Oct 11, 2017Equipment. This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
• 10123227Oct 5, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
• 10134595Oct 3, 2017Electrical system, Equipment. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
• 10123222Oct 3, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10123219Oct 2, 2017Electrical system. This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages “ Brake Pedal Override Feature “, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set.
• 10123214Oct 2, 2017Equipment. This Preliminary Information communication provides information to the technician about the retained accessory power on vehicles with Radio Provisions Only Regular Production Option Code (UXZ). If the vehicle is equipped with radio provisions but was not built with a radio, the retained accessory power feature will not be present.
• 10190339Oct 1, 2017Equipment, Electrical system. Original Equipment Batteries Part Number and ACDelco Replacement Battery Approved Warranty Part Numbers Correct battery cold cranking amperage (CCA) ratings and type are critical for proper test results when using the EL-50313. Access to the battery specification label, which contains the OEM part number and CCA rating and type, may be difficult without component removal. Refer to the table below for the original…
• 10190338Oct 1, 2017Equipment. Essential Tools that Include Consumable Parts (U.S. Only)
• 10190337Oct 1, 2017Suspension. Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
• 10190336Oct 1, 2017Equipment. Information for Fleet Vehicles – Ignition Key, Fob and Key Rings Configuration Some Customers are bundling multiple keys, fobs, and key tags together on a single crimped loop or a cable. This practice may result in unintended key rotation, and should be discontinued immediately. The information in this bulletin details the proper configurations for the ignition key, fob, key rings and key tags and applying a QR…
• 10190321Oct 1, 2017Equipment. Information for Fleet Vehicles – Ignition Key, Fob and Key Rings Configuration Some Customers are bundling multiple keys, fobs, and key tags together on a single crimped loop or a cable. This practice may result in unintended key rotation, and should be discontinued immediately. The information in this bulletin details the proper configurations for the ignition key, fob, key rings and key tags and applying a QR…
• 10190320Oct 1, 2017Electrical system, Equipment. IPC Odometer Programming Method Quick Reference Guide
• 10190267Oct 1, 2017Electrical system. Diagnostic Tip for Malfunction Indicator Lamp (MIL) Illuminated - DTC P249D, P249E, U029D, U029E Set Some customers may comment that the MIL is illuminated. The technician may find one or more of the following DTCs set: • U029D • U029E • P249D • P249E Note: The graphic above depicts an example of a torn and missing seal. • Moisture intrusion past a damaged (1) seal located in the connector for the NOx sensor wiring…
• 10190256Oct 1, 2017Engine cooling, Equipment. Air Conditioning Does Not Blow Cold Some customers may comment that the air conditioning does not blow cold. September 28, 2017 – Updated the model year, VIN breakpoint and notifying dealers that this is a new calibration.
• 10190229Oct 1, 2017Equipment, Transmission and drivetrain. Shake and/or shudder during light throttle acceleration between 40 and 128 km/h (25 and 80 mph) at a steady state.
• 10159589Sep 29, 2017Electrical system, Equipment. This Technical bulletin provides information for reprogramming the HVAC system control module due to the air conditioning not blowing cold because of software anomaly.
• 10157041Sep 28, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical…
• 10157039Sep 27, 2017Engine cooling. This Preliminary information communicatesA vehicle may have a concern of engine noise and/or a misfire. This may be caused by a broken rocker arm.Abroken rocker arms that could result in the valve dropping to the cylinder, causing a catastrophic failure and the engine requires replacement due to cylinder head and block damage.
• 10157031Sep 25, 2017Equipment, Engine. This Preliminary information communicatesA vehicle may have a concern of engine noise and/or a misfire. This may be caused by a broken rocker arm. A broken rocker arms that could result in the valve dropping to the cylinder, causing a catastrophic failure and the engine requires replacement due to cylinder head and block damage. If a broken rocker arm is found check to see if the valve dropped into the cylinder if…
• 10159570Sep 20, 2017Electrical system. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
• 10157020Sep 20, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10157018Sep 20, 2017Fuel system, Tires, Equipment, Electrical system. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
• 10157014Sep 18, 2017Fuel system, Engine. This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel…
• 10159575Sep 14, 2017Electrical system. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
• 10159572Sep 14, 2017Equipment. This informational bulletin explains the importance of maintaining the vehicle.
• 10159569Sep 12, 2017Engine cooling, Equipment. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 10156999Sep 11, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10159578Sep 7, 2017Electrical system, Equipment. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
• 10159576Sep 7, 2017Engine cooling, Equipment. This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared Message Displayed on DIC, DTC P2463 May Be Set.
• 10159588Sep 6, 2017Engine cooling. This informational bulletin provides information on a Service Emission System Message and/or a Malfunction Indicator Lamp illuminated. This usually occurs after recently filling the DEF tank with the ignition in the on position due to some DEF fill equipment uses pumps that create a high level of temporary aeration of the DEF fluid being dispensed in the tank.
• 10159584Sep 6, 2017Transmission and drivetrain, Engine. This technical bulletin provides a procedure on how to properly identify if there is any aftermarket calibrations loaded on the ECM or and detection of a power up hardware installed.
• 10159582Sep 6, 2017Engine cooling, Fuel system. This informational bulletin provides information on Diesel Exhaust Fluid (DEF) and the proper use of the DEF system.
• 10156992Sep 6, 2017Fuel system, Engine cooling. This Preliminary Information communication provides information to the technician that some vehicle may have an “ Exhaust Fluid Quality Poor ” on the Driver Information Center or a diesel exhaust fluid warning lamp on or other exhaust fluid quality related concerns. Technician will inspect the diesel exhaust fluid for contamination.
• 10156990Sep 6, 2017Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
• 10159574Sep 5, 2017Engine. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
• 10159571Sep 5, 2017Fuel system. This Informational Bulletin provides information on availability of Diesel Fuel additives.
• 10140379Aug 31, 2017Engine. This informational bulletin provides information for specification with the engine oil for the Duramax 6.6L engine.
• 10140376Aug 31, 2017Engine cooling. This technical bulletin provides a procedure to replace the turbocharger for vehicles with a condition of Turbocharger Whine Noise due to the blades on the turbo being bent.
• 10140375Aug 31, 2017Engine cooling. This technical bulletin provides to the technician a possible issue with the NOx sensor wiring harness and what to do if corrosion is found.
• 10140372Aug 31, 2017Engine cooling. This informational bulletin advises the technician to test the induction system for leaks for any of the codes listed.
• 10140369Aug 31, 2017Engine cooling. This technical bulletin provides a procedure to Tighten the Charge Air Cooler Duct Clamp to correct a condition of an oil leak originating from either the inlet or outlet duct of the turbocharger due to the charge air cooler pipe clamp not being tightened properly.
• 10140304Aug 31, 2017Engine cooling. This Technical bulletin provides a procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe.
• 10140293Aug 31, 2017Engine cooling. This informational bulletin provides information on Intake Manifold Inspection/Replacement After Severe Internal Engine Damage.
• 10140298Aug 30, 2017Equipment. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
• 10140406Aug 23, 2017Body and structure, Equipment. Thins informational bulletin provides information on Paint-less Dent Repair Process.
• 10140295Aug 22, 2017Electrical system. This informational bulletin provides information on OnStar® VCIM is currently restricted parts. By working closely with our dealers and technicians, through the part restriction process, the General Motors team will gain a better understanding of any field concerns that may develop.
• 10137727Aug 21, 2017Engine. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

← All problems reported for the 2017 GMC Savana