2000 GMC Sierra 1500 Technical Service Bulletins

109 technical service bulletins (TSBs) are on record for the 2000 GMC Sierra 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10165331Jul 3, 2019Fuel system, Equipment. This SKU is a Preformed Fuel Line. The customer communication requested return of unsold inventory to inspect for damage to the braided hose and crimps. Damaged braided hoses and poor crimps can lead to immediate leaking. This issue manifests immediately if present, so would drive replacement and therefore impact the end user in time to complete installation.
• 10162149Jun 24, 2019Brakes. This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
• 10165332Jun 14, 2019Equipment. This SKU is an Air Door Actuator. The customer communication requested return of unsold inventory to inspect for incorrect UPC. Incorrect UPC could lead to a discrepency of inventory at the store. Incorrect UPC would have no impact to the end user as it is a box labeling issue and doesn't impact the part itself.
• 10160679Apr 18, 2019Electrical system. This Preliminary information communicates the need to contact SPAC until GM CCA has sufficient stock.
• 10160637Apr 4, 2019Fuel system. This Preliminary Information communication provides information to the technician about a customer?s request to remove or disable the Bi-Fuel Compressed Natural Gas system. General Motors does not condone the removal of the original equipped Compressed Natural Gas systems.
• 10160632Apr 2, 2019Electrical system. This Preliminary information communicates the need to contact SPAC until GM CCA has sufficient stock.
• 10154306Feb 19, 2019Engine cooling. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
• 10154601Dec 17, 2018Body and structure. This Preliminary Information communication provides information to the technician about vehicles that may have slack in one of the tailgate cables. Technician should not replace any parts for this concern. Please communicate to the customer this condition is a normal operating characteristic of their vehicle.
• 10154552Dec 3, 2018Engine cooling. This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
• 10151874Nov 26, 2018Equipment, Body and structure. This Preliminary Information communication provides the technician with weight capacity for the tailgate and cargo loops in the bed.
• 10125106Nov 7, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
• 10138019Mar 21, 2017Electrical system. This informational bulletin provides information for the GM of Canada OnStar Cellular Communication Upgrade to 3G/4G LTE for vehicles that may need an upgrade.
• 10138060Mar 15, 2017Equipment. This warranty administration bulletin provides policy information with the field action courtesy transportation policy.
• 10082869Aug 29, 2016Engine. This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
• 10082506Aug 26, 2016Equipment. This technical bulletin provides a procedure to reprogram the media disc player with the latest calibrations to correct a condition of the rear entertainment system not operating as intended in colder ambient temperature areas due to calibration concerns.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10078876May 11, 2016Brakes. This preliminary information communication advises the technician that the hydro-boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
• 10083898Apr 27, 2016Electrical system, Equipment. This preliminary information communication advises the technician if unable to place an onstar call in the ignition on mode after the onstar canada upgrade, to contact the gm technical assistance center onstar group for further assistance.
• 10083884Apr 19, 2016Equipment. This preliminary information communication advises the technician on the steps for diagnosing the concern. The vehicle may be unable to connect to onstar using the white, blue or red onstar buttons.
• 10083489Apr 19, 2016Equipment. This preliminary information communication advises the technician the steps on repairing the concern. A customer may identify a concern of unable to reactivate a vehicle's onstar that has been previously disabled by onstar. Dealer is to call general motors technical assistance center for further assistance if the concern is still present.
• 10083484Apr 19, 2016Electrical system. This preliminary information communication provides information to help the dealership technicians perform a parasitic drain test for the onstar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar system.
• 10078735Apr 19, 2016Electrical system. This preliminary information communication provides information to help the dealership technicians perform a parasitic drain test for the onstar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar system.
• 10078734Apr 19, 2016Electrical system. This preliminary information communication advises the technician the steps on repairing the concern. A customer may identify a concern of unable to reactivate a vehicle's onstar that has been previously disabled by onstar. Dealer is to call general motors technical assistance center for further assistance if the concern is still present.
• 10083900Apr 8, 2016Electrical system, Equipment. This preliminary information communication advises the technician, if unable to place an onstar call in the ignition on mode after the onstar canada upgrade to contact the gm technical assistance center onstar group for further assistance.
• 10201115Dec 1, 2015Equipment, Other or unknown. OnStar Voice Fallback Number Update
• 10190512Dec 1, 2015Electrical system, Equipment. OnStar® Voice Fallback Number Update Some customers may have received a letter from OnStar® stating that "We recently tried to provide a software update to the OnStar® hardware in your vehicle. However, your system could not be updated remotely.
• 10115143Nov 30, 2015Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10114474Apr 20, 2015Equipment. This Preliminary Information communication provides information to the technician about connectivity concerns when connecting an Apple device via USB cord. Technician should insure the customer is using an original equipment manufacturer Apple USB cable.
• 10139422Jan 16, 2015Engine cooling. This preliminary informational bulletin provides technicians an engine repair tip for installation of pistons.
• 10245951Nov 1, 2014Equipment. Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
• 10112251Sep 24, 2014Engine cooling. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10246647Sep 1, 2014Brakes. Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
• 10112160Aug 8, 2014Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
• 10112144Jul 31, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicle that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
• 10112137Jul 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10112116Jul 17, 2014Engine cooling. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10248444Jun 30, 2014Equipment. Vehicle Recalls
• 10125953Jun 16, 2014Equipment. This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System.
• 10246952Jun 1, 2014Equipment. Programming And Activation Of Replacement OnStar Modules.
• 10245950Mar 1, 2014Equipment. Canadian Customers Unable To Place Calls In The United States
• 10190932Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10190931Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10112013Jan 22, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
• 10190934Jan 1, 2014Body and structure, Equipment. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the…
• 10190933Jan 1, 2014Equipment, Body and structure. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the…
• 10112331Nov 1, 2013Engine cooling. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10112857Feb 13, 2013Electrical system. This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
• 10112664Dec 13, 2012Electrical system. This Preliminary Information communication provides information to the technician about vehicles may have a no power or no connect concern. Technician will find that the OnStar led is red and Diagnostic Trouble Code U1500 is set. Technician will need to replace the Vehicle Communication Interface Module if the Station Identification number falls in the ranges 14,000,000 - 16,000,000 or 22,000,000 - 23,200,000.
• 10112641Dec 12, 2012Engine cooling. This Preliminary Information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correct fluid to the proper testing center.
• 10112600Nov 26, 2012Transmission and drivetrain. This Preliminary Information communication provides information to the technician with the axel setup information from American Axle Manufacturing. Technician should be advised that the maximum pinion shim to be used or stacked behind the pinion is 0.050?, and the minimum pinion shim is 0.020? for an 8.6 axle. The range for available pinion depth shims for the 10.5? axle is 0.006? to 0.024?. When setting the…

← All problems reported for the 2000 GMC Sierra 1500