2010 GMC Sierra 1500 Technical Service Bulletins

827 technical service bulletins (TSBs) are on record for the 2010 GMC Sierra 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10137698Aug 2, 2017Fuel system, Engine. This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel…
• 10126113Jul 25, 2017Electrical system. This informational bulletin provides information on Information on How to Prevent Inadvertent Vehicle Starting from Key Fob or OnStar Mobile Application and where to locate the information for future use.
• 10114060Jul 5, 2017Electrical system. This Preliminary information communicates an issue with aftermarket USB chargers causing SIR DTC's to set.
• 10138086Mar 29, 2017Suspension. This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
• 10138174Mar 24, 2017Transmission and drivetrain, Engine, Equipment. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle.
• 10138020Mar 21, 2017Electrical system. This informational bulletin explains how to update the older Onstar module software to new software over GSA.
• 10138019Mar 21, 2017Electrical system. This informational bulletin provides information for the GM of Canada OnStar Cellular Communication Upgrade to 3G/4G LTE for vehicles that may need an upgrade.
• 10138087Mar 17, 2017Steering. This preliminary information bulletin provides information for diagnosing a power steering fluid leak at the fluid reservoir.
• 10138060Mar 15, 2017Equipment. This warranty administration bulletin provides policy information with the field action courtesy transportation policy.
• 10138025Mar 13, 2017Steering. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
• 10138054Mar 10, 2017Electrical system. This informational bulletin provides information on On rare occasions, a security code input message with SPS error code E5659, M5304, and/or M5530 may be displayed in TIS2web when the technician is programming any module. If this concern is encountered, the technician should start by ensuring that the module being programmed is not a used module and that the VIN matches on VIN plate, TIS2web programming screen…
• 10138053Mar 9, 2017Transmission and drivetrain. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
• 10138014Mar 7, 2017Equipment. This information bulletin explains the labor operation numbers used for submitting warranty claims and how to setup, and reprogram modules.
• 10138023Mar 2, 2017Fuel system. This technical bulletin provides a procedure to clean and repair the complete fuel system due to dirt getting into the fuel system causing the vehicle to have a hard or no start.
• 10138156Mar 1, 2017Equipment. This Preliminary Information communication to the dealer technicians that the Technical Assistance Center 2ML70 (Two-Mode Hybrid)Part Restrictionhas ended.
• 10113383Feb 20, 2017Equipment. 44180 02 - Customer Satisfaction. Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
• 10113415Feb 13, 2017Suspension. This Preliminary Information communication provides information to the technician on the steps to help diagnose and repair vehicles with a rattle, squeak, clunk, thump, or bump. If published Service Information diagnostics do not lead to a repair for the concern. Technician should inspect the opposite side shock/strut for the cause of the concern.
• 10130553Jan 18, 2017Equipment. 44180 01 - Customer Satisfaction - Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
• 10099962Sep 22, 2016Brakes. This preliminary information communication advises the technician that the electronic brake control module and brake pressure modulator valve for the 2-mode hybrid utilities and trucks are now off restriction through the general motors technical assistance center.
• 10099982Sep 19, 2016Engine. This preliminary information communication provides information to the technician about vehicles that may stall and have a service engine soon malfunction indicator lamp on. Technician may find diagnostic trouble code p0bbd. Technician will need to replace the battery and update the battery energy storage control module using tis2web.
• 10097132Sep 14, 2016Electrical system, Equipment. This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the onstar module for five minutes. After the power has been removed for five minutes, if the onstar system is working release the vehicle.
• 10099981Sep 12, 2016Body and structure, Equipment. This preliminary information communication provides information to the technician about vehicles that have raised dents or ripple appearance in the side outer panel of the cargo box around the perimeter of the wheel house opening. Technician should first access the rear of the inner wheelhouse area through the tail lamp cavity and the front of the wheelhouse from under the vehicle, and coat the inner hem of the…
• 10099252Sep 9, 2016Engine. This preliminary information communication provides information to the technician about vehicles that have a malfunction indicator lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published service information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed.
• 10082412Aug 31, 2016Electrical system. This technical bulletin provides a procedure to check the cylinders for damaged pistons and determine if the use of aftermarket calibrations or performance parts may be the cause.
• 10083241Aug 30, 2016Electrical system. This preliminary information communication provides information to the technician about the use of j-35616-64b terminal test probe, replacement terminals, and terminated leads. The j-35616-64b is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (j-38125-620h) located in lear tray 7 part number 963716-2.
• 10083240Aug 30, 2016Electrical system. This preliminary information communication advises the technician that the high voltage battery for the 2-mode is no longer on part restriction.
• 10083106Aug 30, 2016Transmission and drivetrain. This preliminary information communication advises the technician that the part restriction for the auxiliary transmission fluid pump control module and pump part numbers 24261817and 19207983 has ended.
• 10082869Aug 29, 2016Engine. This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
• 10082506Aug 26, 2016Equipment. This technical bulletin provides a procedure to reprogram the media disc player with the latest calibrations to correct a condition of the rear entertainment system not operating as intended in colder ambient temperature areas due to calibration concerns.
• 10083321Aug 16, 2016Suspension. This preliminary information communication provides information to the technician with the steps to diagnosis and repair vehicles with various handling, vehicle dynamics concerns, noises from the suspension or underbody, or issues related to damaged suspension components. Before any in-depth diagnostics are performed, be aware that various issues could occur if the vehicle has been modified and inform the customer…
• 10083080Aug 15, 2016Engine cooling. This preliminary information communication provides information to the technician about vehicles that may have low oil pressure message. Technician may also find a diagnostic trouble code p0521 in the engine control module. Technician should follow all published service information diagnosis.
• 10082822Aug 12, 2016Electrical system, Engine. This informational bulletin provides information on how to test a battery and what is needed to warranty a battery.
• 10082363Aug 12, 2016Equipment. This warranty administration bulletin provide policy on performing gm covered vehicle services and maintenance on vehicles originating/sold in canada.
• 10082447Aug 8, 2016Engine cooling. This informational bulletin explains a possible normal whining noise from the balance shaft chain if the vehicle has less than 10,000 miles on it.
• 10082860Aug 3, 2016Equipment. This informational bulletin provides information on gm does not approve the use of “clipping” to repair collision damage to vehicles. Gm has not tested or validated a “clipped vehicle” repair; therefore, gm cannot endorse this type of repair or confirm the crash performance during a subsequent collision.
• 10082861Aug 2, 2016Electrical system. This technical bulletin provides a procedure to remove the transport mode on message displayed in the dic due to vehicles shipped over long distances outside the u.s. And canada.
• 10082823Aug 2, 2016Engine cooling. This informational bulletin explains the use of diesel fuel additives in an engine, are not required unless the customer desires additives to prevent fuel concerns depending on fuel or temperature related conditions.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10082820Aug 1, 2016Engine. This informational bulletins provides information on the intake manifold inspection/replacement after servere internal engine damage.
• 10089121Jun 29, 2016Tires, Equipment. This informational bulletin provides guidance to gm dealers when using gm approved tire force variation measurement equipment.
• 10089049Jun 29, 2016Body and structure. This technical bulletin provides a proedure to replace the door panels with newly desgined parts for vehicles with the condition of a broken trim panel around door handle.
• 10089222Jun 22, 2016Tires, Equipment. This informational provides information on slight or mild tire feathering and recommended practices.
• 10089229Jun 20, 2016Electrical system. This informational bulletin provodes information on the gm of canada onstar cellular communication upgrade.
• 10080701Jun 10, 2016Electrical system, Engine. "this preliminary information communication provides steps the technician will take to repair a no crank/no start concern with a diagnostic trouble code of b009f in the serial data gateway module equipped with regular production option code hp2. The vehicle may exhibit a no crank or no start, or a service hybrid message with no codes. The technician will inspect the high voltage circuit impact detection sensor for…
• 10078876May 11, 2016Brakes. This preliminary information communication advises the technician that the hydro-boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
• 10078861May 3, 2016Brakes, Equipment. This preliminary information communication advises the technician that the electronic brake control module and brake pressure modulator valve for the 2-mode hybrid utilities and trucks are being placed on parts ordering restriction through the gm technical assistance center (tac).
• 10078571May 1, 2016Equipment. This informational bulletin provide information on the product quality center (pqc) assembly replacement process.
• 10078568May 1, 2016Transmission and drivetrain, Equipment. This informational bulletin provides information on how to inspect the upper valve body to determine the correct rpo usage to correct a concern that after installation of a replacement upper valve body, the transmission may have no reverse and no 2nd gear due to the installation of the incorrect upper valve body.
• 10083898Apr 27, 2016Equipment, Electrical system. This preliminary information communication advises the technician if unable to place an onstar call in the ignition on mode after the onstar canada upgrade, to contact the gm technical assistance center onstar group for further assistance.
• 10083513Apr 27, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of receiving frequent "off route" messages while following turn by turn (tbt) route navigation. The technician is provided instructions for resetting the vehicle communication interface module for this concern.

← All problems reported for the 2010 GMC Sierra 1500