2014 GMC Sierra 1500Service bulletins
2014 GMC Sierra 1500 Technical Service Bulletins
3,023 technical service bulletins (TSBs) are on record for the 2014 GMC Sierra 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.
- 10135321Oct 10, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the Regular Production Option Code list to verify if the disc is compatible.
- 10135320Oct 10, 2014Equipment. This Preliminary Information communication provides information to the technician on the step to diagnose and repair vehicles that have A Diagnostic Trouble Code P06DD. If the technician finds Diagnostic Trouble Codes P06DA, P06DB, P06DC and Diagnostic Trouble Code P06DD not set install the scan tool and gather information. After the information is gathered call General Motors Technical Assistance Center for…
- 10135318Oct 9, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that engine oil dipstick indicates engine is over filled when performing a Pre-Delivery Inspection or after an oil and filter change. When it is time for the oil change, fill with the recommended amount of engine oil as specified in Service Information.
- 10114285Oct 7, 2014Equipment. This informational bulletin provides a list of parts/replacement parts for the tonneau covers.
- 10135313Oct 6, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a vibration that is felt between 1200 ? 1400 engine revolutions per minute when in active fuel management V4 mode. Technician will need to use J?38792-A Electronic Vibration Analyzer 2 or CH?51450-NVH Pico Oscilloscope Diagnostic Kit to measure the frequency of the vibration.
- 10135312Oct 6, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blow warm. Technician will need to replace the compressor to condenser line and install the line bracket.
- 10114281Oct 6, 2014Fuel system. This informational bulletin states that it no longer valid and refers to a new bulletin.
- 10114280Oct 6, 2014Equipment. This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
- 10135309Oct 2, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that engine oil dipstick indicates engine is over filled when performing a Pre-Delivery Inspection or after an oil and filter change. Technician will drain half a quart of oil.
- 10135308Oct 2, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that when starting the vehicle intermittently they have no audio except chime. Technician will need to disconnect the amplifier, turn on ignition, and verify approximately 12 volts on circuit 3999 connector X4 terminal 14. If no voltage is present, check circuit 3999 for an open and repair as needed.
- 10135306Oct 2, 2014Back-over prevention (rear camera). This Preliminary Information communication provides information to the technician about vehicles that have a loud chime. Technician should not replace any part for this concern. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
- 10135304Oct 2, 2014Electrical system, Engine cooling. This Preliminary Information communication advises the technician that If it is determined the crankshaft needs to be replaced complete the Service Information diagnostics to determine if the crankshaft requires replacement. If determined the engine has bearing and crankshaft damage, the engine should be replaced along with the oil cooler. Also ensure latest version of 09-06-04-026G to verify the Engine Control…
- 10114278Oct 2, 2014Transmission and drivetrain. This preliminary bulletin provides a procedure to inspect and repair the parking pawl spring in the transmission if the customer states that theres a grind or rattle noise during a left turn or bump.
- 10114277Oct 2, 2014Electrical system. This preliminary bulletin provides a procedure to replace the exhaust systems with a stuck closed PEV to correct a cutomers concern of the engine crank no start, engine stall, backfire or hissing noise from tailpipe.
- 10072561Oct 1, 2014Electrical system. Summary to be provided on a future date.
- 10057011Oct 1, 2014Electrical system. Chevrolet/gmc: in some vehicles, I/p lights are turned on and off, instrument cluster goes blank, gauge pointers drop and return and there are some bluetooth issues, which is caused by anomaly of software when during bluetooth device pairing. Model 2014 silverado 1500, sierra 1500.
- 10150643Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
- 10150642Sep 30, 2014Equipment. This preliminary bulletin provides a procedure to update the HMI to correct the customers concern of multipul IPC issues.
- 10142238Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
- 10142236Sep 30, 2014Equipment. This preliminary bulletin provides a procedure to update the HMI to correct the customers concern of multipul IPC issues.
- 10137817Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
- 10137815Sep 30, 2014Electrical system, Equipment. This preliminary bulletin provides a procedure to update the HMI to correct the customers concern of multipul IPC issues.
- 10150641Sep 29, 2014Equipment. This informational procedure provides additional information on towing a vehicle on all 4 wheels behind another vehicle.
- 10142235Sep 29, 2014Transmission and drivetrain, Equipment. This informational procedure provides additional information on towing a vehicle on all 4 wheels behind another vehicle.eq
- 10142233Sep 29, 2014Electrical system. This prelimenary bulletin provides a procedure to replace the accessory a/c and d/c power control module to correct the customers concern of the the power outlet intermittently works.
- 10137814Sep 29, 2014Equipment, Wheels. This informational procedure provides additional information on towing a vehicle on all 4 wheels behind another vehicle.
- 10137812Sep 29, 2014Electrical system. This prelimenary bulletin provides a procedure to replace the accessory a/c and d/c power control module to correct the customers concern of the the power outlet intermittently works.
- 10112259Sep 29, 2014Equipment, Fuel system. This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
- 10112258Sep 29, 2014Fuel system, Equipment. This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
- 10150640Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
- 10142231Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
- 10137810Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
- 10112253Sep 25, 2014Electrical system, Engine. This Preliminary Information communication provides information to the technician about vehicles that continue to running after the engine is shut off. Technician should check for fuses installed into F26UA and F31UA. If fuses are found in any of the two locations the fuses must be removed.
- 10112252Sep 25, 2014Electrical system, Equipment. This Preliminary Information communication provides information to the technician about the Upfitters questions about installing aftermarket electrical accessories. Dealer should reference the latest version of General Motors Upfitter Integration Bulletin 115 for this information. It can be found at http://www.gmupfitter.com.
- 10112251Sep 24, 2014Engine cooling. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
- 10150637Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
- 10142226Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
- 10137805Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
- 10090589Sep 23, 2014Equipment. 14151 - customer satisfaction program (revised population, letter only). Information about customers overfilling their compressed natural gas (cng) tanks in cold weather in certain vehicles was previously sent. Additional 13 vehicles are added for which we do not have current owner name and address. A list is attached with invoicing business associate code, please use the list to assist with identifying the owner…
- 10150635Sep 19, 2014Electrical system. This technical bulletin provides a procedure on how to turn the transport mode message of and reset the battery light flashing.
- 10150634Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
- 10150632Sep 19, 2014Fuel system. This informational bulletin provides information on top tier fuels and what brands are available.
- 10142223Sep 19, 2014Electrical system, Equipment. This technical bulletin provides a procedure on how to turn the transport mode message of and reset the battery light flashing.
- 10142222Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
- 10142220Sep 19, 2014Fuel system. This informational bulletin provides information on top tier fuels and what brands are available.
- 10137802Sep 19, 2014Electrical system. This technical bulletin provides a procedure on how to turn the transport mode message of and reset the battery light flashing.
- 10137801Sep 19, 2014Equipment. This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
- 10137799Sep 19, 2014Fuel system, Equipment. This informational bulletin provides information on top tier fuels and what brands are available.
- 10112244Sep 19, 2014Transmission and drivetrain, Electrical system. This Preliminary Information communication advises the technician that the Engine Control Module part number 12662034 is on restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
- 10112243Sep 19, 2014Body and structure. This Preliminary Information communication provides information to the technician about vehicles that have paint peeling from the anti-chip area. Technician should test another panel on a clean surface above room temperature. Technician will use a 2 inch wide piece of masking tape to the body, and pull upward quickly. If the paint flakes or peels away, the panel in question should be repaired.
← All problems reported for the 2014 GMC Sierra 1500
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Nov 1, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.