2016 GMC Sierra 1500 Technical Service Bulletins

1,214 technical service bulletins (TSBs) are on record for the 2016 GMC Sierra 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10137707Aug 10, 2017Transmission and drivetrain. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015–0.0086 inch.
• 10137704Aug 8, 2017Engine cooling. This Preliminary information communicatesA vehicle may have a concern ofDTCP050D settingalongwith a P0300 after a cold start up. White smoke and/or coolant odor may come from exhaust for an extended period of time at cold start as well. CauseCoolant getting into the cylinders, and provides direction for the repair.
• 10137701Aug 3, 2017Equipment, Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have run hot and or has a tick noise. Technician should inspect the head gaskets to ensure are not installed backwards. Technician should replace the head gasket if they are found installed backwards.
• 10137698Aug 2, 2017Fuel system, Engine. This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel…
• 10137697Aug 2, 2017Electrical system. This Preliminary Information communication provides information to the technician that when scanning a vehicle for Diagnostic Trouble Codes, may find a temporary loss of Human Machine Interface communication with Global Diagnostic System 2. Technician should not replace the Human Machine Interface for this concern, power cycling of the Human Machine Interface fuse should restore communication.
• 10114095Jul 31, 2017Electrical system, Equipment. This Preliminary information communicates that water leaking into the headlamp assembly or headlamp assembly connections can cause an electrical short which will keep modules from shutting down causing a dead battery and a no crank condition, a crank no start,or unable to program the engine control module. Engine control module will set a diagnostic trouble code of P1682, or the engine will continue to run with the…
• 10126113Jul 25, 2017Electrical system. This informational bulletin provides information on Information on How to Prevent Inadvertent Vehicle Starting from Key Fob or OnStar Mobile Application and where to locate the information for future use.
• 10114089Jul 25, 2017Vehicle speed control. This Preliminary Information communication provides information to the technician about vehicles that have a detent / click with a feel of increased resistance when the accelerator pedal is about ¾ of the way. The new accelerator pedal design has a built-in detent position near the last 1/4 of pedal travel. Dealer should communicate to the customer this is a normal operating characteristic of the vehicle and…
• 10114088Jul 24, 2017Electrical system. This Preliminary Information communication provides information to the technician about the text messaging feature on some newer General Motors infotainment systems. Pair the iPhone to the system then enter the Bluetooth settings menu, select the “i” icon next to the vehicle name in the device and enable show notifications. The text messaging feature will be available on the next ignition cycle.
• 10114085Jul 20, 2017Suspension, Engine. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015–0.0086 inch.
• 10108619Jul 18, 2017Transmission and drivetrain, Electrical system. This informational bulletins provides information to the technician about false DTCs setting or stored in the hybrid powertrain control module.
• 10114070Jul 12, 2017Electrical system, Engine, Body and structure. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that have remote start is inoperative, power lift gate Regular Production Option Code (TB5) is inoperative with the ignition off, Crank no start, Start and Stall, and vehicles equipped with the diesel engine, the blower motor may stay on after the engine is turned off. Technician may find…
• 10114069Jul 10, 2017Wheels, Transmission and drivetrain. This Preliminary Information communication advises the technician that generation 5 engines with Regular Production Option Code L83, L86, or LV3 may have an oil consumption concern were one quart in 2000 miles is being used. Dealer will confirm oil level was properly checked per Owner’s Manual, and check the bolt torque on the Valve Lifter Oil Manifold Assembly, before doing any repairs to the vehicle.
• 10114065Jul 7, 2017Visibility (wipers, defrost, mirrors), Lane departure. This Preliminary Information communication provides information to the technician about vehicles thatmay have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view…
• 10114064Jul 6, 2017Body and structure. This Preliminary information communicates and issue with the hood ajar message being displayed when the hood is not ajar. Inspect the body ground strap to insure it is connected in the proper locations and the strap eyelets are tight and do not rotate.
• 10114060Jul 5, 2017Electrical system. This Preliminary information communicates an issue with aftermarket USB chargers causing SIR DTC's to set.
• 10118282Jun 26, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicle that will have no XM audio or no signal. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
• 10118273Jun 19, 2017Engine cooling. This Preliminary information communicates to the dealer additional information on checking for the engne crankcase being overfull on oil causing an engine vibration concern. The technician is advised to inspect for contaminnants and adjust the engine oil level as needed.
• 10118269Jun 16, 2017Suspension. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a buffeting vibration and/or drone type noise, exhaust tone change, and/or body pressure booming. Replace or repair any of the issue that was found in the inspection.If the vehicle is equipped with a 4.3 liter or 5.3 liter engine an updated exhaust system is now available.
• 10118267Jun 15, 2017Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a coolant loss and/or coolant odor after driving the vehicle. Technician will need to test the cooling system looking for leaks at the outer head bolts. If coolant is found replace the head the concern is present on.
• 10118262Jun 14, 2017Engine cooling. This Preliminary information communicatesA vehicle may have a concern ofDTCP050D settingalongwith a P0300 after a cold start up. White smoke and/or coolant odor may come from exhaust for an extended period of time at cold start as well. CauseCoolant getting into the cylinders, and provides direction for the repair.
• 10118238Jun 6, 2017Electrical system. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System” message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake…
• 10113880Apr 27, 2017Fuel system, Equipment. This Preliminary Information communication advises the technician when Service Information diagnostics indicates a fuel injector may need to be removed for a repair or replaced the injector will need a new seal. This Preliminary Information contains all the O-ring seal and the injector kit part numbers.
• 10113869Apr 11, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about vehicle with Service ABS and/or Traction control lights/message on, Service Power Steering System, Service Suspension System, and or Loss of communication with EBCM, SWPS, PSCM, and/or SCM. Technician may find Diagnostic Trouble Codes U0077, U0121, U0126, U0131, U0139, U0401, U0415, and/or U0428. Technician should remove the…
• 10113859Apr 5, 2017Engine. This Preliminary Information communication provides information to the technician about vehicles that have extended or long crank time during cold ambient air temperatures. Direct Injection systems run at higher pressures, and the mechanical pump on the engine must build up the required pressure before the first injection event occurs. Direct Injection engines may have slightly longer cold crank times than that of…
• 10113854Apr 3, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have "Service 4 Wheel Drive" message on the Driver Information Center. Provides the technician with additional information to ensure that the TCCM contains the latest software released to address previous issues, also advises of default action changes. Calls out specific circuits to be inspected to help isolate…
• 10113853Apr 3, 2017Equipment. This Preliminary information communicates to the technician when diagnosing intermittent circuit concerns to look at the connector for missing weather pack seals that could allow water intrusion into the connector and lead to corrosion on the terminals.
• 10138086Mar 29, 2017Suspension. This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
• 10138080Mar 28, 2017Electrical system. This technical bulletin has a procedure to reprogram the HPCM to to correct the customers concern.
• 10138174Mar 24, 2017Transmission and drivetrain, Engine, Equipment. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle.
• 10138015Mar 24, 2017Body and structure. This informational bulletin provides technicians and dealership personnel with spray-in bed liner general information and repair procedures.
• 10138032Mar 20, 2017Wheels. This informational bulletin aids the technician on diagnosing possible vibrations in a vehicle, methods used for testing each scenario and documenting findings. This technical bulletin provides a procedure to install dust deflectors when replacing wheel bearings on vehicles no matter what the concern is of the vehicle. This technical bulletin provides a procedure to reprogram the TRCM to correct the customers…
• 10116662Mar 20, 2017Engine. This Preliminary Information communication advises the technician on the steps to diagnose the concern and the steps to repair the concern. Customer hears a rattle or ticking noise that is louder inside the vehicle than outside. A-This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the…
• 10138087Mar 17, 2017Steering. This preliminary information bulletin provides information for diagnosing a power steering fluid leak at the fluid reservoir.
• 10138033Mar 16, 2017Transmission and drivetrain. This technical bulletin provides a procedure to reprogram the ECM to correct multiple transmission concerns.
• 10138060Mar 15, 2017Equipment. This warranty administration bulletin provides policy information with the field action courtesy transportation policy.
• 10116658Mar 15, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that may have a diagnostic trouble code U0159 set in the instrument panel cluster and /or the body control module. For vehicles equipped with Ultrasonic Park Assist System Regular Production Option Code UD5 or UD7 technician will use Service Programming System to reprogram the Parking Assist Control Module to correct…
• 10138089Mar 14, 2017Suspension. This preliminary bulletin provides additional guidance for diagnosing vibrations or disturbances that may occur on SUVs and how to correct and repair.
• 10116656Mar 14, 2017Electrical system, Brakes. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System” message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake…
• 10138025Mar 13, 2017Steering. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
• 10138054Mar 10, 2017Electrical system. This informational bulletin provides information on On rare occasions, a security code input message with SPS error code E5659, M5304, and/or M5530 may be displayed in TIS2web when the technician is programming any module. If this concern is encountered, the technician should start by ensuring that the module being programmed is not a used module and that the VIN matches on VIN plate, TIS2web programming screen…
• 10138093Mar 9, 2017Transmission and drivetrain. This engineering information is ending the need for information from the field on vehicles that have the condition of Check Engine Light, Delayed Shifts and/or Transmission Stuck in Gear with DTC P0751, P0752, P0756, P0757, P0761 or P0762 Set.
• 10138053Mar 9, 2017Transmission and drivetrain. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
• 10138024Mar 8, 2017Equipment. This Technical Bulletin involves technicians clearing Lost Communication U Codes from modules due to false setting of the DTC.
• 10138014Mar 7, 2017Equipment. This information bulletin explains the labor operation numbers used for submitting warranty claims and how to setup, and reprogram modules.
• 10138039Mar 3, 2017Equipment. This technical bulletin is providing a procedure to reprogram the HMI module to correct multiple conditions including Waiting for Update Media Message, Voice Command For Calling Bluetooth Phone Contacts Inoperative, Intermittent Loss of Rear Camera Gridlines, Service Rear Vision System Message, Radio Turns On Unwanted At Startup, and/or Navigation Radio Destination State Defaults To WV, Intermittent Radio/display…
• 10138023Mar 2, 2017Fuel system. This technical bulletin provides a procedure to clean and repair the complete fuel system due to dirt getting into the fuel system causing the vehicle to have a hard or no start.
• 10113462Feb 28, 2017Equipment, Body and structure. This Preliminary information communicates a customer concern ofSIR light on with any DTC set in the SDM. During diagnostics a technician may find water in the SDM connector and is unable to locate a leak path. Dealer is instructed to inspect X150 connector for being broken allowing water into the body harness. Dealer to repair affected connector or harness as needed.
• 10113457Feb 28, 2017Engine cooling. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a buffeting vibration and/or drone type noise, exhaust tone change, and/or body pressure booming. Replace or repair any of the issue that was found in the inspection.If the vehicle is equipped with a 4.3 liter or 5.3 liter engine an updated exhaust system is now available.
• 10113390Feb 28, 2017Air bags. Dessicated Air Bag Inflator Study - Used Vehicle Inventory Only. The 2016 model year Chevrolet Cruze Limited has been added to this engineering study. The attached instruction sheet has been updated accordingly. Please discard previous instructions. The list of eligible vehicles also attached to this message contains 2016 Chevrolet Cruze Limited vehicles that have been identified as currently being in used vehicle…

← All problems reported for the 2016 GMC Sierra 1500