2018 GMC Sierra 1500 Technical Service Bulletins

956 technical service bulletins (TSBs) are on record for the 2018 GMC Sierra 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10209122Mar 2, 2022Engine cooling. Information bulletin explains a possible coolant leak coming from the cylinder head bolt areas.
• 10208991Feb 24, 2022Electrical system. This Preliminary information communicates a process to correct the concern of Unable to contact OnStar after the 3G EOL on 2015-2022 model year vehicles in the United States.
• 10208983Feb 14, 2022Electrical system. This Preliminary information communicates and issue with the memory seat module waking up the low speed GM lan bus and causing a battery draw.
• 10208971Feb 3, 2022Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10215770Feb 1, 2022Other or unknown. Information.
• 10215764Feb 1, 2022Electrical system, Engine cooling. Engine Control Module Update.
• 10212633Jan 28, 2022Equipment. This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only).
• 10208053Jan 24, 2022Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10212630Jan 21, 2022Fuel system, Engine. This technical provides a procedure to check for a possible faulty Reductant Injector and replace if the cause of the customers concern.
• 10212629Jan 20, 2022Engine cooling. This technical bulletin provides a procedure for the technician to check and tighten the CAC plumbing if found loose.
• 10212628Jan 18, 2022Electrical system. This service bulletin provides information for dealers/technicians on Stone Chip/Membrane Damage, Broken Connector and/or Sensor Retaining Tabs, and/or Paint Damage of Park Assist Sensors.
• 10212605Jan 18, 2022Engine. This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
• 10208039Jan 18, 2022Back-over prevention (rear camera), Electrical system. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
• 10208036Jan 18, 2022Lane departure. This Preliminary Information communication provides information to the technician with additional information on the functionality of Lane Keep Assist. Starting with 2016 model year Lane Keep Assist Regular Production Option Code (UHX) replaced Lane Departure Warning Regular Production Option Code (UFL). Lane Keep Assist is designed to assist the driver in keeping the vehicle from drifting out of a driving lane…
• 10208035Jan 18, 2022Engine cooling. This Preliminary Information communication provides information to the technician about fluid leaking from the brake caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston installation. This grease can be cleaned off and the rest of the service completed.
• 10208034Jan 18, 2022Other or unknown. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10208029Jan 14, 2022Engine. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10208027Jan 14, 2022Brakes, Fuel system. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
• 10212614Jan 12, 2022Engine cooling. This informational bulletin provides tips for showing a way to confirm if its a mechanical engine issue or not.
• 10212612Jan 12, 2022Engine cooling. This bulletin provides additional information on how to graph a cylinder misfire and a possible diagnostic cause.
• 10214204Jan 11, 2022Equipment, Engine cooling. This informational bulletin explains how the regen works for the DEF system and how it works at different levels.
• 10212625Jan 11, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10212616Jan 10, 2022Engine cooling. This informational bulletin explains how to identify possible DEF contamination.
• 10208010Jan 6, 2022Transmission and drivetrain. This Preliminary Information communication provides information to the technician about being to achieve pre-load when setting up the pinion bearing pre-loads during reassembly of the 9.5/9.76 inch rear axles. Technician will need to use pinion gear install washer part number 11609638 onto the pinion shaft between the flange and nut. Tighten the pinion nut until you achieve 10 pound inch or 1.0 newton rotating…
• 10206727Dec 15, 2021Engine cooling, Transmission and drivetrain. This Preliminary information communicates to dealers an issue on remanufactured engines with part numbers 19368174 and 19368176 where the incorrect crankshaft timing gear was installed. Provides dealer with information to correct this condition.
• 10206726Dec 14, 2021Engine cooling. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
• 10207911Dec 10, 2021Transmission and drivetrain. This informational bulletin advises the technician to replace the TBV if the transmission has any type of repair even if no problem was found, to replace the tbv.
• 10205540Nov 23, 2021Engine cooling, Transmission and drivetrain. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal.
• 10201329Aug 26, 2021Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that the blower motor may be noisy or vibrate when running. This concern will only occur when the temperatures is below 32 degrees Fahrenheit and if the blower motor is removed while still cold, ice may be found on the blower motor cage. This concern could be caused by water leaking or snow ingestion into the…
• 10201326Aug 24, 2021Electrical system. This Preliminary Information communication provides information to the technician how to repair vehicles that Instrument Panel Cluster, Radio, and Heater-Vent-Air Conditioning display blanks out, Bluetooth phone or Pandora connection dropped, the radio station or volume changes when operating the snow plow. Please advise the customer that engineering is aware of this concern and working on this issue.
• 10201310Aug 11, 2021Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support.
• 10201253Jul 22, 2021Air bags, Other or unknown, Electrical system. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System? message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake system…
• 10201177Jul 22, 2021Electrical system. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System? message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake system…
• 10201252Jul 21, 2021Air bags, Transmission and drivetrain. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency…
• 10201251Jul 21, 2021Electrical system. This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
• 10200199Jul 20, 2021Engine cooling, Fuel system, Equipment. Special Coverage. Certain vehicles equipped with a 6.6L diesel engine (RPO L5P), may have a condition that could cause the engine glow plugs to fail. If this condition occurs, the Malfunction Indicator Light (Check Engine Light) will illuminate and a diagnostic trouble code will set. Additionally, the engine may be hard to start or the engine may run rough immediately following engine start. Dealers are to replace…
• 10201183Jul 15, 2021Engine. This Preliminary information communicates to dealers an issue on remanufactured engines with part numbers 19368174 and 19368176 where the incorrect crankshaft timing gear was installed. Provides dealer with information to correct this condition.
• 10200195Jul 1, 2021Equipment, Engine cooling. Customer Satisfaction Program Closed Message sent.
• 10200150Jun 30, 2021Electrical system. This service bulletin provides information on High Voltage Battery Module Replacement.
• 10201285Jun 16, 2021Tires. This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
• 10201281Jun 15, 2021Equipment. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10197309May 25, 2021Brakes. This Preliminary information communicates the location of the GM Accessory Performance Brake System Rotor Specifications
• 10197306May 25, 2021Suspension, Electronic stability control. This Preliminary Information communication provides information to the technician with the steps to diagnosis and repair vehicles with various handling, vehicle dynamics concerns, noises from the suspension or underbody, or issues related to damaged suspension components. Before any in-depth diagnostics are performed, be aware that various issues could occur if the vehicle has been modified and inform the customer…
• 10197297May 14, 2021Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10197296May 13, 2021Equipment. This Preliminary information communicates information on how dealers can contact the supplier for Associated Accessories offered through GM.
• 10193474Apr 26, 2021Visibility (wipers, defrost, mirrors), Equipment. This Preliminary information communicates if the sunroof, rear sliding window, and/or wireless charging are found to be inoperative due to the F2DL and/or the F8DL fuse(s) being open. Inspect the center console harness area at the hinge pivot point for chaffed circuits.
• 10193430Apr 1, 2021Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have slack in one of the tailgate cables. Technician should not replace any parts for this concern. Please communicate to the customer this condition is a normal operating characteristic of their vehicle.
• 10190426Mar 25, 2021Electrical system. This Preliminary information communicates and issue with the memory seat module waking up the low speed GM lan bus and causing a battery draw.
• 10190355Mar 1, 2021Body and structure. This Preliminary information communicates to the dealer technician to inspect for a missing 1-2-7-8-R clutch fluid passage seal or incorrect 1-2-7-8-R clutch fluid passage seal being install for a no movement concern after valve body replacement on the 8L45 or 8L90 transmissions.
• 10187412Dec 23, 2020Equipment, Electrical system. This technical bulletin provides repair information to correct a customer concern of IPC Gauges Inoperative or Fluctuate, No Crank, Start then Stall.

← All problems reported for the 2018 GMC Sierra 1500