2019 GMC Sierra 1500 Technical Service Bulletins

1,754 technical service bulletins (TSBs) are on record for the 2019 GMC Sierra 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10232283Feb 17, 2023Body and structure, Visibility (wipers, defrost, mirrors), Other or unknown. This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
• 10232152Feb 17, 2023Visibility (wipers, defrost, mirrors), Body and structure. This technical bulletin provides repair information to correct a customer concern of the foam strip between the I/P trim and base of the windshield detaching from the upper I/P trim panel.
• 10232143Feb 17, 2023Equipment. This warranty administration bulletin provides policy information for variable diagnostic time allowances on select labor operations (U.S. Only).
• 10232819Feb 16, 2023Air bags, Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10232275Feb 16, 2023Transmission and drivetrain. This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
• 10232817Feb 15, 2023Electrical system. This Preliminary information communicates a diagnostic tip for an issue where the starter stays engaged after the engine starts. Dealers are to suspect/monitor the crankshaft position sensor.
• 10232139Feb 15, 2023Engine cooling. This service bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
• 10232136Feb 15, 2023Exterior lighting. This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
• 10232137Feb 14, 2023Exterior lighting. This service bulletin provides technicians with information on available BCM calibrations to restore bulb outage detection on vehicles produced by a second stage manufacturer (Upfitter), and/or turn signals flash fast after factory box removed.
• 10232811Feb 10, 2023Equipment. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
• 10232809Feb 10, 2023Transmission and drivetrain. This Preliminary information communicates to the dealer a diagnostic and repair direction to a possible engine crankshaft bearing failure.
• 10232069Feb 10, 2023Equipment, Exterior lighting, Latches, locks and linkages. This service bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
• 10232071Feb 8, 2023Engine cooling. This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.
• 10232070Feb 7, 2023Electrical system, Equipment. This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse.
• 10232793Feb 6, 2023Back-over prevention (rear camera). This Preliminary information communicates diagnostics aids for rear view camera issues that may be encountered.
• 10231519Jan 31, 2023Tires, Wheels, Equipment. This service bulletin provides information for tire pressure monitoring (TPM) system concerns.
• 10231518Jan 31, 2023Equipment, Tires, Wheels. This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks.
• 10231675Jan 30, 2023Engine. This Preliminary information communicates that some customers may comment that after an auto-stop event the engine does not restart and to inspect the engine ground strap. Temporarly on hold while PIE0572 is active. PIE0572 has now ended and reinstating the PI.
• 10231514Jan 24, 2023Engine cooling, Electrical system. This technical bulletin provides repair information to correct a customer concern of Charge Air Cooler (CAC) Icing, Check Engine Lamp Illuminated, Possible P0299, P2227, and/or P0300 DTCs Set.
• 10231487Jan 20, 2023Transmission and drivetrain. This informational bulletin advises the technician of a possibly noise coming from the transmission oil pump.
• 10231365Jan 20, 2023Engine cooling. This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.
• 10231364Jan 20, 2023Latches, locks and linkages. This service bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
• 10231302Jan 20, 2023Equipment. This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
• 10231427Jan 19, 2023Electrical system, Transmission and drivetrain. This informational bulletin advises the tech to inspect the transfer case motor electrical connectors for possible damage or corrosion that might be caused by a damage grommet inside the electrical connector.
• 10231650Jan 18, 2023Visibility (wipers, defrost, mirrors). This Preliminary information communicates an issue with poor a/c performance and to replace the a/c condenser.
• 10231649Jan 17, 2023Visibility (wipers, defrost, mirrors). This Preliminary information communicates an issues will low or poor heater performance on the drivers side. Dealers are to inspect the HVAC temperature door linkage and if ok replace the heater core.
• 10231646Jan 17, 2023Back-over prevention (rear camera), Electrical system. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
• 10231374Jan 17, 2023Equipment. This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with RPO ATH and AVJ.
• 10231643Jan 13, 2023Engine cooling. This Preliminary information communicates to the dealers information related to a Malfunction Indicator Lamp (MIL) Illuminated During Cold Ambient Temperatures with DTCs P30C3 and/or P30BF P30C7 P30CB Setting.
• 10230612Jan 13, 2023Electrical system. This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content.
• 10231640Jan 12, 2023Electrical system. This Preliminary information communicates diagnostic tips when trying to root cause a SES MIL with DTC's B2B0D and B2B0E. Main cause is aftermarket electrical devices spliced into the ignition main fuses.
• 10230609Jan 12, 2023Transmission and drivetrain. This service bulletin provides a repair procedure to correct a customer concern of Delayed and/or Harsh Engagement of Transmission Shift After Vehicle Sitting with Engine Off.
• 10230608Jan 12, 2023Transmission and drivetrain. This Technical bulletin provides a repair to correct a condition of Shudder/Surging While Driving.
• 10230611Jan 11, 2023Engine cooling, Electrical system. This technical bulletin provides a procedure to locate a possible short in the engine wiring harness.
• 10231632Jan 9, 2023Fuel system. This Preliminary Information communication provides information to the technician about vehicles that may have a bump feel or clunk noise at a stop or on launch. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle. The bump clunk issue may be due to fuel movement in the fuel tank when not completely full. The condition is eliminated after completely filling…
• 10230583Jan 6, 2023Engine cooling. This service bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
• 10228951Jan 6, 2023Engine cooling. Service Update. Certain vehicles may have a condition in which ice or sludge can accumulate in the Charge Air Cooler (CAC) or Closed Crankcase Ventilation (CCV) system when driving in extremely cold weather conditions (-18°C (0°F) or less). Dealers will install a radiator air front lower baffle and, if necessary, reprogram the Engine Control Module.
• 10231625Jan 5, 2023Engine cooling. This Preliminary information communicates in temperatures below freezing, it may be noticed that exhaust is only exiting from the right hand exhaust tailpipe. The cause of this condition is a low point in left side tailpipe which results in condensation building up at the low point in the tailpipe. In low temperatures the condensation can freeze and form ice limiting the flow of exhaust out of the left tailpipe.
• 10230604Jan 4, 2023Wheels, Transmission and drivetrain. This technical bulletin provides a procedure to replace the front wheel drive shaft if found the cause of the custmers concern.
• 10228912Dec 23, 2022Wheels. This service bulletin provides information on Dealer Installed LPO Wheel Installation and Return Process.
• 10228907Dec 21, 2022Transmission and drivetrain. This service bulletin provides a diagnostic procedure to aid in correcting a customer concern of a Howling, Whining/Whirring Noise, Shudder/Vibration and/or Grinding Noise While in 4HI, 4HI Auto and/or During Parking Lot Maneuvers in Auto Mode.
• 10228906Dec 21, 2022Equipment. This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
• 10230697Dec 15, 2022Visibility (wipers, defrost, mirrors). This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
• 10228893Dec 15, 2022Electrical system, Equipment, Engine cooling. This bulletin provides a procedure to program the BCM to correct the customers concern of RKE idle Time-out.
• 10230695Dec 14, 2022Equipment. This Preliminary information communicates information on how dealers can contact the supplier for Associated Accessories offered through GM.
• 10228888Dec 14, 2022Engine cooling. This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
• 10228886Dec 14, 2022Engine cooling. This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
• 10228863Dec 13, 2022Engine cooling, Transmission and drivetrain. This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
• 10230691Dec 12, 2022Forward collision avoidance. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
• 10228229Dec 9, 2022Suspension. This engineering information (EI) closure ends the need for gathering information from technicians in regards to the front upper control arm ball joint separated from the socket.

← All problems reported for the 2019 GMC Sierra 1500