2019 GMC Sierra 2500 Technical Service Bulletins

946 technical service bulletins (TSBs) are on record for the 2019 GMC Sierra 2500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10176655May 12, 2020Electrical system. This engineering information (EI) is requesting information from technicians to perform the checklist provided and contact the engineer listed in regards to Shift to Park Message on Drivers Information Center (DIC) (ONLY On Push Button Ignition), Unable to Remove Key from Ignition Cylinder and/or Difficult to Shift Out of Park.
• 10176619May 8, 2020Equipment, Fuel system. This technical bulletin provides a procedure to replace the fuel tank, sending unit and install a piece of fuel hose to the vent and route down the fuel feed line and secure with zip ties.
• 10176644May 7, 2020Equipment. This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
• 10176646May 6, 2020Equipment, Electrical system. This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
• 10176632May 5, 2020Fuel system, Engine. This informational bulletin explains to the tech on how to order a new fuel injector by matching the part number on the part and ordering it from the EPC.
• 10176651May 4, 2020Engine. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
• 10176630May 4, 2020Engine cooling, Electrical system. This informational bulletin provides a way for the technician to identify if the ECM has been modified.
• 10176624May 4, 2020Engine cooling. This informational bulletin advises the technician to not replace the TMAP sensor, clean it using air or harsh chemicals but allow time for the sensor to thaw.
• 10176611May 4, 2020Equipment, Engine, Fuel system. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal.
• 10175854Apr 30, 2020Equipment. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
• 10175850Apr 29, 2020Tires, Equipment. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
• 10175853Apr 28, 2020Equipment. This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
• 10174864Apr 28, 2020Equipment. This Preliminary Information communication advises the technician that some vehicles may have a dim Driver Information Center when the interior of the vehicle is hot from a sun load or extended heater operation. The Driver Information Center is designed to dim with high temperature exposure. This is done to protect the Driver Information Center from damage.
• 10174860Apr 27, 2020Engine cooling. This Preliminary information communicates the possibility of dtc P12A6 with the possibility of a crank no start or extended crank concern.
• 10174859Apr 27, 2020Electrical system. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
• 10175858Apr 20, 2020Equipment, Transmission and drivetrain. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a Service 4WD message being visible on the driver information center (DIC).
• 10174826Apr 17, 2020Engine cooling. This Preliminary information communicates the possibility of dtc P12A6 with the possibility of a crank no start or extended crank concern.
• 10175855Apr 14, 2020Equipment, Body and structure. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
• 10174818Apr 14, 2020Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10174304Mar 31, 2020Equipment. This warranty administration bulletin explains to the technician that when using wiring repair labor operations, additional information may be needed when submitting Global Warranty transactions when doing wiring repairs.
• 10173960Mar 28, 2020Electrical system. Customer Satisfaction Program - Certain vehicles may have a condition in which the electronic brake controlmodule is less likely to activate the optional integrated brake assist. Normal braking capability functions as intended. Dealers are to reprogram the front view camera by performing the SPS Programming/SPS Configuration/GDS2 Learn.
• 10174448Mar 25, 2020Other or unknown. This engineering information (EI) is requesting information from technicians to perform the checklist provided and contact the engineer listed in regards to a Check Trailer Message on Drivers Information Center (DIC) and/or F74, F82 Fuses Blown.
• 10174446Mar 24, 2020Equipment. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards on a Service 4WD message being visible the driver information center (DIC).
• 10174302Mar 20, 2020Equipment. This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
• 10174303Mar 18, 2020Equipment. This warranty administration bulletin provides policy information for courtesy transportation and roadside assistance programs.
• 10174305Mar 17, 2020Engine cooling. This informational bulletin explains the normal noises an engine may make when the ambient temperature outside is cold or the vehicle has sat for a few hours.
• 10173683Mar 11, 2020Electrical system. This Preliminary information communicates a customer concern of IPC gauges inoperative or fluctuate, No Start, No Crank, SIR Light / Service Airbag Message, Service Suspension Message, Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback, HVAC controls inoperative.
• 10174440Mar 10, 2020Equipment, Lane departure. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Instrument Panel Cluster (IPC) Gages at Zero, Multiple Warning Lights On, No Chimes and/or Turn Single Audio.
• 10174306Mar 9, 2020Back-over prevention (rear camera), Engine. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
• 10174299Mar 6, 2020Equipment. This informational bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
• 10174441Mar 5, 2020Lane departure. This engineering information (EI) is requesting information from the technicians for issues regarding Instrument Panel Cluster (IPC) Gages at Zero, Multiple Warning Lights On, No Chimes and/or Turn Single Audio.
• 10174300Mar 4, 2020Tires. This informational bulletin provides information for dealers/technicians on Use of Nitrogen Gas in Tires.
• 10179892Mar 3, 2020Electrical system. Hypertech Inline Speedometer Calibrator Module Installation Instructions
• 10174301Mar 3, 2020Equipment. This warranty administration bulletin provides information on Warranty Administration ? Customer Concern Not Duplicated (CCND) Labor Operation Numbers.
• 10174073Mar 3, 2020Equipment. This technical bulletin provides a procedure to clear the codes and test the Tcase if found that the customer has tried to shift the t-case from 4lo to Hi gears while driving.
• 10174307Mar 2, 2020Equipment. This warranty administration bulletin provides information on Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program Information.
• 10173626Mar 2, 2020Back-over prevention (rear camera). This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message
• 10173416Feb 28, 2020Engine, Equipment. This informational bulletin explains Unscheduled Supplemental Services (including Flushing Services and Additives) and the Proper use of GM Simplified Maintenance Schedules.
• 10173393Feb 28, 2020Equipment, Body and structure. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
• 10173415Feb 27, 2020Equipment. This bulletin provides information on Warranty Administration ? Required Operating Procedures - 8 Points (U.S. Only).
• 10173414Feb 26, 2020Tires, Equipment. This warranty administration bulletin provides information on the tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
• 10172814Feb 26, 2020Engine, Equipment. This informational bulletin advises the technician to not replace the TMAP sensor, clean it using air or harsh chemicals but allow time for the sensor to thaw.
• 10173408Feb 25, 2020Transmission and drivetrain. This technical bulletin provides a procedure to replace the transmission shifter control if found the cause of the condition.
• 10173404Feb 24, 2020Equipment, Steering. This informational bulletin explains there is another steering hose that can be used for cold weather drivers that experience a steering hose leak.
• 10173388Feb 17, 2020Body and structure. This technical bulletin provides repair information to correct a customer concern of water found in rear interior of cab due to water leak at rear sliding window.
• 10173418Feb 14, 2020Equipment. This Warranty Administration bulletin provides information on Essential Tools that include Consumable Parts (U.S. Only).
• 10173417Feb 14, 2020Equipment, Wheels. This informational bulletin provides information on Wheel Alignment Specifications, Requirements and Recommendations for GM Vehicles.
• 10172773Feb 14, 2020Equipment. This warranty administration bulletin provide policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
• 10173423Feb 13, 2020Electrical system. This engineering information (EI) is requesting information from the field to perform the check list provided and contact the engineer in regards to Instrument Panel Cluster (IPC) Gages at Zero, Multiple Warning Lights On, No Chimes and/or Turn Single Audio.
• 10173386Feb 12, 2020Body and structure. This technical bulletin provides a procedure to add washers on the lower column mounting bracket locations due to the shaft laying on the metal support at the bottom of the column.

← All problems reported for the 2019 GMC Sierra 2500