2013 GMC Yukon Denali XLService bulletins
2013 GMC Yukon Denali XL Technical Service Bulletins
1,477 technical service bulletins (TSBs) are on record for the 2013 GMC Yukon Denali XL. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.
- 10118290Jun 30, 2017Equipment. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane…
- 10118256Jun 12, 2017Electrical system. This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System.
- 10118233Jun 2, 2017Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
- 10137665May 23, 2017Equipment. This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
- 10137600May 22, 2017Wheels. This informational bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
- 10137680May 19, 2017Brakes. This preliminary informational bulletin provides information regarding the normal characteristic of instrument panel red brake light intermittently comes on.
- 10137605May 15, 2017Equipment. This informational bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
- 10137653May 10, 2017Engine, Equipment. This informational bulletin explains the difference in oil filters and the possibilities of what may happen using the incorrect filter.
- 10137640May 10, 2017Transmission and drivetrain. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
- 10137635May 10, 2017Equipment, Fuel system. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
- 10137676May 5, 2017Equipment. This preliminary informational bulletin provides technicians with information on the normal condition of white, milky or cloudy appearance of front differential fluid.
- 10137602May 4, 2017Equipment. This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
- 10137603May 2, 2017Equipment. This warranty administration bulletin provide policy information on required operating procedures.
- 10113978Apr 26, 2017Equipment. This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
- 10114027Apr 19, 2017Wheels. This informational bulletin provides information on Non-Design Intent Wheel Lock Nuts and Lug Nuts.
- 10114048Apr 12, 2017Equipment. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
- 10113977Apr 10, 2017Equipment. This informational bulletin provides information on proper use of floor mats.
- 10113976Apr 6, 2017Electrical system. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
- 10138086Mar 29, 2017Suspension. This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
- 10138174Mar 24, 2017Transmission and drivetrain, Engine, Equipment. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle.
- 10138020Mar 21, 2017Electrical system. This informational bulletin explains how to update the older Onstar module software to new software over GSA.
- 10138019Mar 21, 2017Electrical system. This informational bulletin provides information for the GM of Canada OnStar Cellular Communication Upgrade to 3G/4G LTE for vehicles that may need an upgrade.
- 10138087Mar 17, 2017Steering. This preliminary information bulletin provides information for diagnosing a power steering fluid leak at the fluid reservoir.
- 10138060Mar 15, 2017Equipment. This warranty administration bulletin provides policy information with the field action courtesy transportation policy.
- 10138025Mar 13, 2017Steering. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
- 10138054Mar 10, 2017Electrical system. This informational bulletin provides information on On rare occasions, a security code input message with SPS error code E5659, M5304, and/or M5530 may be displayed in TIS2web when the technician is programming any module. If this concern is encountered, the technician should start by ensuring that the module being programmed is not a used module and that the VIN matches on VIN plate, TIS2web programming screen…
- 10138053Mar 9, 2017Transmission and drivetrain. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
- 10138014Mar 7, 2017Equipment. This information bulletin explains the labor operation numbers used for submitting warranty claims and how to setup, and reprogram modules.
- 10116589Feb 28, 2017Equipment. This informational bulletin provides information for dealers how to submit a product information report.
- 10113456Feb 28, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
- 10116588Feb 24, 2017Electrical system. This informational bulletin provides explanation on how to take snapshot data with a Tech 2 and upload it to a computer and where to email the info to.
- 10113454Feb 24, 2017Electrical system. This Preliminary Information communication provides information to help the dealership technicians perform a parasitic drain test for the OnStar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system.
- 10116637Feb 23, 2017Wheels. This Informational bulletin outlines the recommendations for aluminum and chrome wheel refinishing.
- 10113443Feb 22, 2017Electrical system. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
- 10116605Feb 21, 2017Transmission and drivetrain. This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
- 10113438Feb 20, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicle that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
- 10113437Feb 20, 2017Electrical system. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have an OnStar Turn-By-Turn Navigation the system that is inoperative. Technician verifies there are no Diagnostic Trouble Codes are present in the Antilock Braking System and Vehicle Communication Interface Module of the vehicle. If no Diagnostic Trouble Codes found call OnStar using…
- 10113436Feb 20, 2017Steering, Electrical system. This Preliminary Information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the customer is having that is unwanted. The vehicle may receive an incoming call just like any other phone. Typically the customer will hear the phone ringing in the vehicle. This…
- 10113383Feb 20, 2017Equipment. 44180 02 - Customer Satisfaction. Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
- 10113427Feb 17, 2017Electrical system. This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System.
- 10116585Feb 16, 2017Equipment. This informational bulletin provides information for dealers/technicians on when and how to submit a field product report.
- 10116584Feb 13, 2017Equipment. This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
- 10113418Feb 13, 2017Engine. This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed. Update added part numbers for the…
- 10113416Feb 13, 2017Equipment. This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be…
- 10113413Feb 10, 2017Electrical system. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
- 10116596Feb 7, 2017Steering. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
- 10116540Jan 26, 2017Equipment. This warranty administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment.
- 10116537Jan 19, 2017Tires. This technical bulletin provides a procedure on how to clean and resurface wheel bead seats. for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel Bead Seat Corrosion (Clean and Resurface Wheel Bead Seat)
- 10130553Jan 18, 2017Equipment. 44180 01 - Customer Satisfaction - Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
- 10116534Jan 12, 2017Electrical system. This informational bulletin provides information on OnStar® VCIM is currently restricted parts. By working closely with our dealers and technicians, through the part restriction process, the General Motors team will gain a better understanding of any field concerns that may develop.
← All problems reported for the 2013 GMC Yukon Denali XL
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Nov 1, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.