2016 GMC Yukon Denali XL Technical Service Bulletins

365 technical service bulletins (TSBs) are on record for the 2016 GMC Yukon Denali XL. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10089108Jun 30, 2016Equipment. This technical bulletin provides a procedure to reprogram the hmi module to correct a condition of gps inoperative, red line across gps indicator or the location is stuck in warren michigan.
• 10081961Jun 14, 2016Visibility (wipers, defrost, mirrors). This technical bulletin provides information on the proper reconnection of the rear window defroster tab if a customer comments one loose or broken.
• 10097195Jun 8, 2016Equipment. This technical bulletin provides a procedure to inspect the air box and air filter seal and replace if necessary to correct a customer concern that the malfunction indicator light (mil) is illuminated due to excessive sand and/or debris entering the air filter box and bypassing the seal of the air filter causing damage to the ho2 sensor and the catalytic converter to become blocked with sand and debris particles.
• 10078432Jun 8, 2016Equipment. This technical bulletin provides a procedure to inspect the air box and air filter seal and replace if necessary to correct a customer concern that the malfunction indicator light (mil) is illuminated due to excessive sand and/or debris entering the air filter box and bypassing the seal of the air filter causing damage to the ho2 sensor and the catalytic converter to become blocked with sand and debris particles.
• 10096223Feb 10, 2016Equipment, Back-over prevention (rear camera). This preliminary information communication provides information to the technician about vehicles that may have a "service front camera" message on the driver information center intermittently. When the technician uses the scan tool to check for diagnostic trouble codes a history u023a and/or u026a may be set in the instrument panel cluster and/or body control module. It is important that the technician does not…
• 10246963Jan 13, 2016Equipment. Changing Turn-By-Turn Voice Response To Metric Or English Units
• 10245977Jan 11, 2016Seats. Rattle Noise From Second Row Seat.
• 10250074Jan 1, 2016Transmission and drivetrain. Information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares
• 10250067Jan 1, 2016Equipment. Infotainment System Will Not Return to Media After Bluetooth Call Ends
• 10246561Jan 1, 2016Transmission and drivetrain. Information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares
• 10201118Dec 1, 2015Electrical system, Transmission and drivetrain. Recovery Process from a Controller Reprogramming Interruption
• 10201099Dec 1, 2015Electrical system, Equipment. IPC Odometer Programming Method Quick Reference Guide
• 10201098Dec 1, 2015Transmission and drivetrain, Engine. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
• 10190503Dec 1, 2015Engine, Transmission and drivetrain. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
• 10190387Dec 1, 2015Transmission and drivetrain, Electrical system. Recovery Process from a Controller Reprogramming Interruption During service reprogramming of the T87 TCM, some technicians may notice the TCM may fail during the reprogramming event and become unresponsive to the Service Programming System (SPS), unresponsive to the GDS2 tool. This bulletin addresses corrective actions to attempt to recover the module before declaring the TCM as a bad part and replacing. During…

← All problems reported for the 2016 GMC Yukon Denali XL