2002 GMC Yukon Technical Service Bulletins

407 technical service bulletins (TSBs) are on record for the 2002 GMC Yukon. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10113721Mar 2, 2015Suspension. This preliminary informational bulletin provides technicians a recommendation for when they are performing a front end alignment and find an alignment dowel pin missing .
• 10113720Mar 2, 2015Equipment. This informational bulletin provides information on a GM of Canada OnStar® cellular communication upgrade.
• 10114408Feb 13, 2015Equipment. This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The…
• 10139437Jan 23, 2015Electrical system. This informational bulletin updates information on electrical ground repairs using new replacement fasteners with conductive finish.
• 10139422Jan 16, 2015Engine cooling. This preliminary informational bulletin provides technicians an engine repair tip for installation of pistons.
• 10114343Jan 14, 2015Equipment. This Preliminary Information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the customer is having that is unwanted. The vehicle may receive an incoming call just like any other phone. Typically the customer will hear the phone ringing in the vehicle. This…
• 10114342Jan 14, 2015Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10094888Jan 14, 2015Equipment, Electrical system. This preliminary information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the customer is having that is unwanted. The vehicle may receive an incoming call just like any other phone. Typically the customer will hear the phone ringing in the vehicle. This…
• 10126237Dec 11, 2014Visibility (wipers, defrost, mirrors). This informational bulletin provide information for the technicians to repair the rear window defroster contact or tabs.
• 10114776Dec 10, 2014Exterior lighting, Suspension, Body and structure. This Preliminary Information communication provides information to the technician about vehicles that have a lean to the left or right. Technician will need to measure fender wheel-opening heights, front and rear, to quantify vehicle lean. Fender wheel-opening heights are related to, but distinct from, trim height. The front wheel-opening height is known as P height, and the rear wheel-opening height is known as R…
• 10114759Nov 24, 2014Equipment. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10114746Nov 21, 2014Engine. This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon an upper engine and valve cleaning should be performed.
• 10114705Nov 4, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The…
• 10114239Nov 3, 2014Equipment. This warranty bulletin clarifies the use of dealer empowerment to satisfy the customer.
• 10252163Nov 1, 2014Equipment. XM Audio Traffic And Travel Link Availability And Operation.
• 10245951Nov 1, 2014Equipment. Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
• 10135356Oct 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10114325Oct 28, 2014Brakes. This informational bulletin is to inform dealers of an improved service strategy to aid in the replacement of hydraulic brake pipes, Customer Care and Aftersales (CCA) has released pre-formed and pre-flared hydraulic brake pipe kits.
• 10114313Oct 24, 2014Brakes. This informational bulletin is to inform dealers of an improved service strategy to aid in the replacement of hydraulic brake pipes, Customer Care and Aftersales (CCA) has released pre-formed and pre-flared hydraulic brake pipe kits.
• 10135342Oct 20, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135337Oct 17, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The…
• 10135322Oct 10, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135321Oct 10, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the Regular Production Option Code list to verify if the disc is compatible.
• 10150639Sep 24, 2014Equipment, Brakes. This informational bulletin is to inform dealers of an improved service strategy to aid in the replacement of hydraulic brake pipes, Customer Care and Aftersales (CCA) has released pre-formed and pre-flared hydraulic brake pipe kits.
• 10142229Sep 24, 2014Brakes. This informational bulletin is to inform dealers of an improved service strategy to aid in the replacement of hydraulic brake pipes, Customer Care and Aftersales (CCA) has released pre-formed and pre-flared hydraulic brake pipe kits.
• 10137808Sep 24, 2014Brakes. This informational bulletin is to inform dealers of an improved service strategy to aid in the replacement of hydraulic brake pipes, Customer Care and Aftersales (CCA) has released pre-formed and pre-flared hydraulic brake pipe kits.
• 10112251Sep 24, 2014Engine cooling. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10150627Sep 16, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10142208Sep 16, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10137787Sep 16, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10246647Sep 1, 2014Brakes. Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
• 10054261Sep 1, 2014Brakes. Chevrolet/gmc/cadillac: anytime hydraulic brake pipes assembly need replacing, pre-formed and pre-flared brake pipes are available, except rear axle crossover pipe. Model 1999-2007 silverado, sierra, 2000-2006 escalade models, avalanche, suburban, tahoe, yukon models. *pe updated 7/18/14. *pe updated 12/9/14.
• 10138682Aug 18, 2014Equipment. This preliminary bulletin provides a diagnostic tip to install a temporary dowl rod to perform an alignment.
• 10112160Aug 8, 2014Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
• 10112137Jul 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10140437Jul 25, 2014Equipment, Engine. This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
• 10138592Jul 25, 2014Equipment. This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
• 10137842Jul 25, 2014Equipment, Engine cooling. This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
• 10112116Jul 17, 2014Engine cooling. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10140367Jul 16, 2014Equipment. This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.
• 10138582Jul 16, 2014Equipment. This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.
• 10137832Jul 16, 2014Equipment. This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.
• 10140363Jul 11, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10138578Jul 11, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10137828Jul 11, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10248444Jun 30, 2014Equipment. Vehicle Recalls
• 10126285Jun 16, 2014Equipment. This preliminary bulletin provides procedures on how to reset or refresh the XM radio receiver is the customers states that they only get a few channels.
• 10125956Jun 16, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that may not receiving all channels on the XM band. Technician will need to use a scan tool and verify current Digital Radio Receiver Status under Data Display. Technician will need to look at the second line labeled Digital Radio Receiver Status will display a number of 00 - 04. Technician will repair per the status…
• 10125953Jun 16, 2014Equipment. This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System.
• 10246952Jun 1, 2014Equipment. Programming And Activation Of Replacement OnStar Modules.

← All problems reported for the 2002 GMC Yukon