2015 GMC Yukon Technical Service Bulletins

2,535 technical service bulletins (TSBs) are on record for the 2015 GMC Yukon. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10112770Mar 2, 2016Electrical system. This informational bulletin provides information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability
• 10112769Mar 2, 2016Equipment. This informational bulletin provides information on Battery Testing and Warranty Replacement Requirements (North America ONLY)
• 10112768Mar 2, 2016Equipment. This informational bulletin provides information on how to properly maintain vehicles in the dealer inventory
• 10112764Mar 1, 2016Equipment. This warranty informational bulletin provides a list of all the required operating procedures and explains them out to what is acceptable and not.
• 10114443Feb 27, 2016Fuel system. This Preliminary Information communication provides information to the technician about vehicles that have an inaccurate fuel gauge. Technician should drive the vehicle to duplicate the concern. The fuel gauge will have a tendency to falsely indicate a lower fuel level than what is actually present. The fuel gauge will take a few minutes to show the correct fuel level. On vehicles equipped with an automatic…
• 10095974Feb 26, 2016Engine cooling. This preliminary information communication provides information to the technician about vehicle that may have black smoke on a cold start. A dual-pulse injection strategy is utilized during engine cold start to reduce the time required to bring the catalytic converter up to operating temperature. This split injection strategy lasts for about 60 seconds on cold start. This process may cause the customer to see…
• 10116920Feb 25, 2016Tires, Electrical system. This informational bulletin provides information on how to trace and complete a wire to wire repair on vehicle that have the concern of Service Tire Monitor System, Tire Pressures Display Dashes, RKE Short Range, No Fob Detected Message
• 10116914Feb 23, 2016Tires, Wheels. This informational bulletin provides information on the proper mounting paste to apply to tires when mounting and balancing them to prevent conditions like Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel)
• 10114431Feb 23, 2016Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
• 10096241Feb 23, 2016Equipment. This preliminary information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have rattle or buzz noise from the rear of the vehicle. Technician will need to remove right rear inner fender well and inspect the rear auxiliary heater / evaporator lines for contacting each other. If the lines are found to be contacting each other, loosen the retaining…
• 10096046Feb 23, 2016Transmission and drivetrain. This preliminary information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015–0.0086 inch.
• 10116912Feb 22, 2016Equipment. This informational bulletin provides Information Regarding Servicing Components Located Near SIR Components and how to properly disable the SIR system for repairs at or near
• 10096070Feb 22, 2016Engine, Transmission and drivetrain. This preliminary information communication provides information to the technician on the step to diagnose and repair the vehicles that may have a shake or shudder during light throttle acceleration, between 30 and 65 mph steady state driving. Also shudder feeling that may be described as driving over rumble strips or rough pavement. Technician will drive the vehicle and monitor the torque converter clutch slip.
• 10096141Feb 18, 2016Equipment. This preliminary information communication provides information to the technician about vehicles that may have an outside air temperature inoperative. To perform an instant update of the ambient temperature sensor, press and hold the recirc button and air conditioning button on the heater-vent-air conditioning control head simultaneously. It is also possible to perform this by using a scan tool in special function…
• 10096207Feb 17, 2016Visibility (wipers, defrost, mirrors), Equipment. This preliminary information communication provides information to the technician about vehicle that may have wind whistle noise heard from the right or left rear quarter glass area when driving at highway speeds or with a cross wind. Technician will inspect the quarter glass for excessive urethane. If excessive urethane is found use a sharp knife and cut off the excessive urethane. Also the technician will install…
• 10096211Feb 15, 2016Brakes. This preliminary information communication provides information to the technician on the step needed to diagnose and repair vehicles that may have uneven brake pad wear. Technician will need to inspect and measure the brake pads thickness. Also determine the customer’s driving style. The disc brake pads should only be replaced if the friction surface is worn to within 2.0 mm (0.079 in) of the…
• 10095945Feb 15, 2016Fuel system, Engine. This preliminary information communication provides information to the technician how to diagnose and repair a vehicle with an engine that runs with an intermittent crank no start with a diagnostic trouble code p0011 or p00c6 current or history. The camshaft position actuator solenoid valve may be sticking or binding causing the valve timing to be retarded. Dealer will need to cycle the camshaft position actuator…
• 10095583Feb 15, 2016Equipment. This preliminary information communication provides information to the technician with the steps need to diagnose and repair vehicle that may have a concern with navigation icon not showing the correct location then jumping to the correct location. The position indicator may show the vehicle turning in the opposite direction or may show the vehicle traveling off the road. Technician will inspect the human machine…
• 10116892Feb 12, 2016Engine cooling. This engineering informational bulletin is requesting information from the field on vehicles that have a concern on Bang or Loud Noise with No Forward (Drive) or Reverse Ranges
• 10116891Feb 12, 2016Equipment. This informational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm (U.S. Only)
• 10116890Feb 12, 2016Exterior lighting. This informational bulletin provides an out line on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage and what should be considered warranty replacement and not
• 10096221Feb 12, 2016Engine cooling, Equipment. This preliminary information communication provides information to the technician on the steps needed to diagnose and repair vehicles that may have a rattle noise from the dash. Technician will need to inspect for the rear heater pipes contacting the passenger side exhaust manifold. If the rear heater pipe is found to be contacting the exhaust manifold, reposition the heater pipe so it no longer makes contact.
• 10096033Feb 12, 2016Engine. This preliminary information communication advises the technician before replacing the crankshaft to review the following. Dealer should complete the service information diagnostics and the cost comparison worksheet for assembly repair vs replacement. Technician will use the latest version of 09-06-04-026g to verify the ecm calibration is not an aftermarket calibration. If the customer prefers to keep the original…
• 10116888Feb 11, 2016Equipment. This informational bulletin provides information on Unscheduled Supplemental Services (Including Flushing Services and Additives) and Proper Use of GM Simplified Maintenance Schedules (U.S. Only)
• 10096215Feb 11, 2016Tires. This preliminary information communication provides information to the technician about vehicles that may have one or more tire pressures display dashes, service tire monitor system message, remote keyless entry poor range or inoperative or “no fob detected” message or passive entry system inoperative (if equipped).
• 10096026Feb 11, 2016Equipment. This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10096208Feb 10, 2016Brakes. This preliminary information communication provides information to the technician on the steps to diagnose and repair vehicles that may have issues were the customer will need increased effort to depress the brake pedal. Technician may find fluid in the brake booster and/or the booster vacuum line. Technician will need to replace vacuum pump, brake booster, master cylinder, vacuum pump belt and the vacuum line…
• 10116878Feb 9, 2016Electrical system, Equipment. This informational bulletin provides Information on Inappropriate Warranty Claims Submitted for Damaged Radios and Instrument Panel Clusters (IPCs)
• 10095901Feb 9, 2016Engine. This preliminary information communication provides information to the technician about vehicles that may have a cold engine tick noise for 50 seconds at start up. Technician determines if the tick noise is possibly coming from the exhaust manifold, as this noise could easily be mistaken for an engine tick noise.
• 10116874Feb 8, 2016Exterior lighting. This informational bulletin provides information on exterior lamp condinsation and replacement guidelines
• 10096054Feb 8, 2016Equipment, Transmission and drivetrain. This preliminary information communication provides information to the technician that some vehicles may have a high pitched whine noise from the vehicle noticed when driving in auto 4wd. When the transfer case control module has to move the transfer case actuator motor the higher current passing through the module causes an "electronic buzz or whine" within some of the capacitors in the module that can be heard by…
• 10116871Feb 5, 2016Equipment. This informational bulletin provides information on how to properly repair rust on the hem flange on doors for vehicles that have the condition of rust showing at hem flange
• 10116868Feb 4, 2016Equipment. This engineering informational bulletin is requesting information on vehicles that have the condition of Bang or Loud Noise with No Forward (Drive) or Reverse Ranges
• 10116864Feb 2, 2016Engine. This technical bulletin provides a procedure to replace 4-5-6 clutch hub to correct a condition of No Fourth, Fifth and Sixth Gears and/or Malfunction indicator Lamp Illuminated with DTC P0796
• 10116863Feb 1, 2016Equipment. This informational bulletin provides information on Behavior of Non-Upgraded OnStar Equipped Vehicles Operating in Canada after Decommissioning of 2G CDMA Cellular Networks
• 10114376Jan 30, 2016Equipment. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have a grind, pop, shudder or bind feeling/noise in the steering column when turning left or right. Technician will inspect for the lower column bearing to be out of position and the upper intermediate steering shaft to lower column shaft bolt and nut may be contacting the…
• 10095352Jan 30, 2016Steering. This preliminary information communication provides information to the technician on how to diagnose and repair vehicles that may have a grind, pop, shudder or bind feeling/noise in the steering column when turning left or right. Technician will inspect for the lower column bearing to be out of position and the upper intermediate steering shaft to lower column shaft bolt and nut may be contacting the…
• 10112305Jan 29, 2016Transmission and drivetrain. This technical bulletin provides a procedure to reprogram the transmission control module to correct a firm garage shift, start up clunk, and DTC P16F3 condition
• 10080081Jan 29, 2016Equipment. 15577 - customer satisfaction program. Vehicles have an incorrect electrical circuit label on the instrument panel left end cap cover that shows four incorrect fuse positions. This condition could lead to service confusion, and possible improper fuse installation. Fuses protect wiring circuits, and if a higher than required fuse is installed, the circuit wire may fault open or increased risk of fire may result…
• 10112302Jan 28, 2016Seats, Air bags. This informational bulletin provides Information on Passenger Presence Sensing System (PPS or PSS) Concerns with Custom Upholstery, Accessory Seat Heaters or Other Comfort Enhancing Devices
• 10112299Jan 27, 2016Equipment. This informational bulletin provides information on Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only)
• 10252174Jan 22, 2016Equipment. Radio Inoperative with No Communication and DTC U0184
• 10112282Jan 21, 2016Transmission and drivetrain. This technical bulletin provides a procedure on replacing the stator shaft support for vehicles with the condition of a delayed engagement after sitting with the engine off.
• 10075739Jan 20, 2016Engine. Some customers may comment about a rough idle and/or vibration at idle in Drive. This condition may be most noticeable following extended driving, while idling at a stop in Drive. May feel like a lopey or lumpy idle, or may be described as a low idle. This condition will not be present in Park, Reverse, or Neutral. There will not be any DTCs with this concern.
• 10248475Jan 19, 2016Equipment. Unable To Install a CD Or DVD
• 10114675Jan 19, 2016Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a lifter that has collapsed and is stuck in the lifter bore when completing 15-06-01-002A. Technician will use vice grips with a slide hammer to remove the lifter. Or the technician can use vice grip and a pry bar. If the lifter will not come out the engine will need to be replaced.
• 10112277Jan 19, 2016Equipment, Electrical system. This technical bulletin provides a procedure to update your apple product to the latest software version to correct a condition of infotainment system will not return to media after bluetooth call ends
• 10075754Jan 19, 2016Electrical system. Summary to be provided on a future date.
• 10112272Jan 14, 2016Engine. This informational bulletin provides information on close coupled converters and there affect on newly installed engines or engines during there break in period.
• 10246963Jan 13, 2016Equipment. Changing Turn-By-Turn Voice Response To Metric Or English Units

← All problems reported for the 2015 GMC Yukon