2017 GMC Yukon Technical Service Bulletins

1,419 technical service bulletins (TSBs) are on record for the 2017 GMC Yukon. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10099468Sep 23, 2016Engine. This preliminary information communication provides information to the technician the steps needed to diagnose and repair vehicles with a rough idle and/or vibration at idle in drive. This condition will not be present in park, or neutral. This concern may be caused by ground out within the one or both engine mounts. Technician will use ch-51450-a (pico oscilloscope) to measure the vibration disturbance.
• 10118915Sep 22, 2016Equipment. This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
• 10118910Sep 22, 2016Equipment. This informational bulletin provides information on new tools used for the Hem Flanges and how to repair and seal the flanges when the repairs are done.
• 10100046Sep 21, 2016Brakes, Engine, Transmission and drivetrain, Electrical system. This preliminary information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no driver information center messages “ brake pedal override feature “, transmission busy or frequent shifting up or down, and diagnostic trouble codes p057b, p057c, and/or p057d may or may not be set.
• 10118908Sep 19, 2016Equipment. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
• 10099875Sep 19, 2016Equipment, Vehicle speed control. This preliminary information communication provides information to the technician about vehicles that have speedometer inaccurate reads 5 mph when traveling 50 mph. Engineering is working to develop a solution.
• 10118914Sep 16, 2016Electrical system. This informational bulletin explains the programming method quick reference guide for the IPC Odometer.
• 10118909Sep 14, 2016Tires. This GM of Canada New Vehicle Tire Warranty Program and GWM Transaction Submission Information Bulletin provides information for the new tires that the vehicle are equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage) and for vehicles within this warranty period, the defective tires will be replaced on a pro rata…
• 10100442Sep 14, 2016Electrical system. This preliminary information communication provides information to the technician about vehicles that may have the onstar wireless fidelity inoperative. Technician will need to contact general motors technical assistance center with a scan tool connect to the vehicle for further assistance.
• 10100305Sep 13, 2016Electrical system. This preliminary information communication provides information to the technician about customers that may request the factory integrated trailer brake controller regular production option code (jl1) be installed on their full-size pickup or suv when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
• 10098423Sep 13, 2016Steering. This preliminary information communication provides information to the technician about the media oriented systems transport bus diagnostic tool kit (el-51578) has been released to help diagnose any of the media oriented systems transport bus concerns. The kit contains header connectors that are installed to bypass media oriented systems transport bus modules. The bypass connector also contains a terminal for…
• 10098501Sep 12, 2016Electrical system. This preliminary information communicates that when customer or technician may indicate when attempting to add a new transmitter to a vehicle following the adding transmitters without service programming system procedure. The procedure will not complete and a message "remote learn pending" will be displayed on the driver information center.
• 10118911Sep 1, 2016Fuel system. This informational Bulletin provides Do's and Don'ts for maximizing gasoline engine fuel economy, other various tips and a list of websites for additional information.
• 10082412Aug 31, 2016Electrical system. This technical bulletin provides a procedure to check the cylinders for damaged pistons and determine if the use of aftermarket calibrations or performance parts may be the cause.
• 10083360Aug 30, 2016Electrical system. This preliminary information communication provides information to the technician of addition information when diagnosing a service driver assist message with a diagnostic trouble code b172e and or a b172f. The haptic seat motor has a pigtail lead coming off of it. In many cases the wiring pigtail near the haptic seat motor has broken and will require replacement.
• 10083241Aug 30, 2016Electrical system. This preliminary information communication provides information to the technician about the use of j-35616-64b terminal test probe, replacement terminals, and terminated leads. The j-35616-64b is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (j-38125-620h) located in lear tray 7 part number 963716-2.
• 10082277Aug 30, 2016Tires, Equipment. This informational bulletin provides the correct information that is needed to correctly know what tpm sensor is needed to be installed on vehicles if there is accessory wheels installed and who to contact when the accessory wheels will not learn the tpm's to the vehicles.
• 10083325Aug 29, 2016Equipment. This preliminary information communication advises the technician that the human machine interface, radio or tuner, radio controls, integrated center stack, display, and media disc players are placed on restriction through the general motors technical assistance center. Dealer will need to contact general motors technical assistance center for further assistance.
• 10082869Aug 29, 2016Engine. This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
• 10082411Aug 26, 2016Equipment. This technical bulletin provides a procedure to enable the 4g lte wifi on newly delivered vehicles for some vehicles that were not shipped with the feature not enabled.
• 10083251Aug 19, 2016Electrical system. This preliminary information communication provides information to the technician on the steps to diagnose and repair vehicles that have remote start is inoperative, power lift-gate regular production option code (tb5) is inoperative with the ignition off, and vehicles equipped with the diesel engine, the blower motor may stay on after the engine is turned off. Technician may find diagnostic trouble code p2537 set.
• 10081880Aug 19, 2016Transmission and drivetrain. This technical bulletin provides the procedures to complete a transsmission adaptive learn on all the different types of vehicles and transmissions based on rpo options to correct a condition of harsh shifts on hard accellerations.
• 10083321Aug 16, 2016Suspension. This preliminary information communication provides information to the technician with the steps to diagnosis and repair vehicles with various handling, vehicle dynamics concerns, noises from the suspension or underbody, or issues related to damaged suspension components. Before any in-depth diagnostics are performed, be aware that various issues could occur if the vehicle has been modified and inform the customer…
• 10082865Aug 15, 2016Seat belts. This preliminary informational bulletin provides a procedure to reposition the front seat belt latch plate for concerns regarding the seat belt webbing or latch plate coming twisted.
• 10082822Aug 12, 2016Electrical system, Engine. This informational bulletin provides information on how to test a battery and what is needed to warranty a battery.
• 10083121Aug 8, 2016Fuel system. This preliminary information communication provides information to the technician on the steps to diagnosing the concern of a rattle, tick and/or a vibration from the rear of the vehicle. This could be coming from the fuel feed line between the fuel tank and ethanol sensor. Technician will apply pressure to the fuel line to determine if this is the source of the concern.
• 10082447Aug 8, 2016Engine cooling. This informational bulletin explains a possible normal whining noise from the balance shaft chain if the vehicle has less than 10,000 miles on it.
• 10083131Aug 5, 2016Electrical system. This preliminary information communication provides the technician with steps on how to program an engine control module when getting a service programming system error code e4491 or e4423. In some cases techline customer support center may need to be contacted to resolve the issue.
• 10082860Aug 3, 2016Equipment. This informational bulletin provides information on gm does not approve the use of “clipping” to repair collision damage to vehicles. Gm has not tested or validated a “clipped vehicle” repair; therefore, gm cannot endorse this type of repair or confirm the crash performance during a subsequent collision.
• 10082437Aug 3, 2016Air bags. This informational bulletin provides information on locating and reconnecting airbag connectors that are not fully seated to correct a customer concern of an airbag warning lamp illuminated, or one, or more, airbag dtc(s) set.
• 10082861Aug 2, 2016Electrical system. This technical bulletin provides a procedure to remove the transport mode on message displayed in the dic due to vehicles shipped over long distances outside the u.s. And canada.
• 10082823Aug 2, 2016Engine cooling. This informational bulletin explains the use of diesel fuel additives in an engine, are not required unless the customer desires additives to prevent fuel concerns depending on fuel or temperature related conditions.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10082422Aug 2, 2016Equipment. This technical bulletin provides diagnostic tips to help correct multiple concerns regarding the usb port being inoperative or unable to play music through the usb port.
• 10082820Aug 1, 2016Engine. This informational bulletins provides information on the intake manifold inspection/replacement after servere internal engine damage.
• 10126063Jul 12, 2016Engine. This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage.
• 10126062Jul 11, 2016Brakes. This informational bulletin provides information on installing the correct tires for vehicles with the condition of under hard acceleration at higher speeds, the traction control light will flash. Or, they may come in for ABS or general handling/braking concerns.
• 10100822Jul 11, 2016Engine. This informational bulletin provides the technician with what may happen to an engine due to lack of maintenance.
• 10089121Jun 29, 2016Tires, Equipment. This informational bulletin provides guidance to gm dealers when using gm approved tire force variation measurement equipment.
• 10080981Jun 29, 2016Equipment. This preliminary information communicates the procedure to the technician how to regain blu-ray/cd/dvd player function on all new generation infotainment systems with regular production option code u42 or uwg blu-ray players. If this concern is encountered, cycle the cd player/media disc player fuse and re-evaluate the concern.
• 10089228Jun 17, 2016Equipment. This technical bulletin provides a procedure to remove the transport mode on message displayed in the dic due to vehicles shipped over long distances outside the u.s. And canada.
• 10089247Jun 10, 2016Equipment. This informational bulletin provides information on the proper use of floor mats.
• 10114105May 31, 2016Engine, Electrical system. This informational bulletin provides information on identifying non-GM (aftermarket) engine calibrations for gasoline engines using Tech 2 or GDS 2.
• 10114101May 25, 2016Wheels. This informational bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening or re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed.
• 10118547May 20, 2016Tires. This informational bulletin provides information on the temporary tire flat spotting condition.
• 10118546May 16, 2016Equipment. This informational bulletin provides information on a new U.S. dealer special tool loan program.
• 10118545May 16, 2016Electrical system, Equipment. This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
• 10134545May 13, 2016Electrical system. This informational bulletin provides warranty information on accessory power outlet and trailer lighting fuse replacement.
• 10134536May 6, 2016Equipment. This warranty administration bulletin provides information on GM?s policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
• 10081365May 6, 2016Electrical system. This informational bulletin provides information on the identification of vehicles that are shipped with the transport mode on and how to turn it off.

← All problems reported for the 2017 GMC Yukon