2018 GMC Yukon Technical Service Bulletins

1,116 technical service bulletins (TSBs) are on record for the 2018 GMC Yukon. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10156907Mar 4, 2019Body and structure. This Preliminary Information communication provides information to the technician for a water leak in in the second and third row seating area. Inspect the C-pillar which is the body vertical structure behind the rear passenger door area of the affected side of the vehicle for water intrusion or water marks on the seat belt retractor.
• 10158838Mar 1, 2019Engine. This informational bulletin provides information on a normal engine operating condition for faster emission warm up time.
• 10154638Feb 28, 2019Transmission and drivetrain. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
• 10155073Feb 26, 2019Equipment. This informational bulletin provides the dealer with information on what to do when requesting a new key code for the customer.
• 10154322Feb 25, 2019Back-over prevention (rear camera). This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message
• 10154319Feb 25, 2019Latches, locks and linkages. This Preliminary Information communication provides information to the technician about vehicles that have the alarm sounding when learning new key fobs after the original key fobs were lost. Technician will open the driver's door and allow the Content Theft Deterrent alarm to activate, which will pulse the horns and exterior lamps for approximately 30 seconds and the alarm will shut off at this time.
• 10154634Feb 19, 2019Visibility (wipers, defrost, mirrors). This technical bulletin provides a procedure to reinstall the rear defroster tab on the rear window defogger for vehicles with the condition of rear defrosters inoperative or if one is to break during a normal repair.
• 10154306Feb 19, 2019Engine cooling. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
• 10154299Feb 18, 2019Engine cooling. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
• 10155068Feb 15, 2019Tires. This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (in Canada, the Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
• 10154641Feb 15, 2019Equipment. This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
• 10154649Feb 14, 2019Body and structure. This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
• 10155072Feb 8, 2019Electrical system. This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the Transport Mode message On and Off.
• 10155071Feb 8, 2019Equipment. This warranty nonadministrative bulletin provides information on the proper use of the labor operation 0600014.
• 10154276Feb 7, 2019Engine cooling. This Preliminary information communicates P0016 setting after internal engire repair. The engine Base timing is not being set correctly. The information in this PI will be helpful in setting the timing in the vehicle.
• 10155070Feb 5, 2019Equipment. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
• 10154264Feb 4, 2019Electrical system. This Preliminary Information communication provides information to the technician about vehicles that may have a service engine soon malfunction indicator lamp, antilock braking system malfunction indicator lamp, service suspension system message, misfire, hesitation, no crank, heater-vent-air conditioning inoperative. Technician may find F11UA, F104UA, F35UA, and or F60UA blown. Technician should inspect the…
• 10154628Jan 31, 2019Equipment. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10154625Jan 31, 2019Equipment. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
• 10155065Jan 24, 2019Equipment. This engineering informational bulletin is requesting information to check the shutters through the grille opening of the vehicle. If snow and/or ice is present on the active grille air shutters, take pictures and submit through the Field Reporting Process.
• 10154626Jan 24, 2019Equipment. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
• 10154618Jan 24, 2019Equipment. This informational bulletin provides information for dealers/technicians on Information on Head-Up Display (HUD) on Vehicles Model Year 2017 and Newer Has Rotational Feature that Allows for Adjusting of the Angle of the HUD Image.
• 10155051Jan 23, 2019Wheels. This informational bulletin explains the wheel Road Force balancers and what they can do for customer concerns.
• 10155046Jan 22, 2019Engine. This informational bulletin aids the technician on diagnosing possible vibrations in a vehicle, methods used for testing each scenario and documenting findings.
• 10154629Jan 18, 2019Electrical system. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
• 10154627Jan 14, 2019Equipment. This warranty administration bulletin provides policy information on required operating procedures.
• 10155043Jan 9, 2019Body and structure. This technical bulletin provides repair information to correct a customer concern of hearing a squeak or creak from the right rear of vehicle while driving.
• 10154258Jan 7, 2019Steering. N182190820 - Customer Satisfaction Program. Certain vehicles, may have a condition where the power steering belt may slip due to tooth wear-out or poor belt tooth-to-gear tooth fit. Power steering assist may be reduced or lost intermittently, if early warning signs are ignored. Early warnings may include a ?Steering Assist is Reduced? message, audible clicking / squealing sounds, or a change in steering effort…
• 10154617Dec 28, 2018Steering. This Preliminary information communicates a repair procedure for a squeak/squawk type noise coming from the lower column/drivers footwell area when turning. It explains how to properly lubricate the column shaft boot where the shaft interacts with the boot where it passes through the boot.
• 10155010Dec 21, 2018Equipment. This warranty bulletin provides labor operation numbers for customer concerns Not duplicated (CCND).
• 10155003Dec 17, 2018Seats. This technical bulletin provides repair information to correct a customer concern of front seat lateral movement and/or click type noise while driving.
• 10154997Dec 17, 2018Body and structure. This informational bulletin provides information for replacing the power liftgate assist actuator.
• 10154606Dec 17, 2018Equipment. This Preliminary Information communication provides information to the technician about the Media Oriented Systems Transport Bus Diagnostic Tool Kit (EL-51578) has been released to help diagnose any of the Media Oriented Systems Transport bus concerns. The kit contains header connectors that are installed to bypass Media Oriented Systems Transport bus modules. The bypass connector also contains a terminal for…
• 10154605Dec 17, 2018Suspension. This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center.
• 10154975Dec 14, 2018Transmission and drivetrain, Equipment. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
• 10155014Dec 13, 2018Equipment. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10155009Dec 13, 2018Exterior lighting. This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
• 10154976Dec 13, 2018Latches, locks and linkages. This informational bulletin provides information and operating tips for the hands free lift gate.
• 10154583Dec 13, 2018Brakes. This Preliminary Information communication provides information to the technician about fluid leaking from the brake caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston installation. This grease can be cleaned off and the rest of the service completed.
• 10154981Dec 11, 2018Electrical system. This technical bulletin provides a procedure to replace the GEN I charging system with a GEN II charging system only if vehicles apply within the settings.
• 10154577Dec 11, 2018Engine cooling. This Preliminary information communicates to the dealer additional information on checking for the engne crankcase being overfull on oil causing an engine vibration concern. The technician is advised to inspect for contaminnants and adjust the engine oil level as needed.
• 10155019Dec 10, 2018Body and structure, Equipment, Exterior lighting. This engineering informational bulletin is requesting information on product issue with the door weather strip, door body fit, and/or rear tail lamp moisture.
• 10154566Dec 6, 2018Engine cooling. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
• 10155012Dec 5, 2018Equipment, Seats. This informational bulletin provides information for information on passenger presence sensing system (PPS or PSS) concerns with custom upholstery, accessory seat heaters or other comfort enhancing devices.
• 10155011Dec 5, 2018Electrical system. This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
• 10155008Dec 5, 2018Tires. This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
• 10154991Dec 3, 2018Visibility (wipers, defrost, mirrors), Lane departure. This technical bulletin provides a procedure to replace the side mirror cameras if found the cause of the reduced key fob range.
• 10154552Dec 3, 2018Engine cooling. This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
• 10151879Nov 27, 2018Engine. This Preliminary Information communication advises the technician that there have been some reports that the current engine hours are not correct and display 0.0. Technician will need to program the Instrument Panel Cluster using Service Programming System.
• 10151869Nov 21, 2018Equipment. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.

← All problems reported for the 2018 GMC Yukon