2002 Honda GL1800A Recalls
NHTSA lists 4 recall campaigns for the 2002 Honda GL1800A. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.
- Service brakes, hydraulic › Foundation components › Master cylinderCovers: Honda GL1800A 2001–2005, GL1800 2001–2010, 2012–2015, GL1800B 2013–2015
Reported issue: American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.
Possible consequence: A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.
Remedy: Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This…
- Structure › Frame and membersCovers: Honda GL1800A 2001–2004, GL1800 2001–2004
Reported issue: On some motorcycles, certain frame welds do not meet manufacturing specifications. High loads created when riding on rough road surfaces or through potholes can cause the affected welds to crack.
Possible consequence: The welded area could break, resulting in rear suspension collapse or lower cross member separation, increasing the risk of a crash.
Remedy: Dealers will inspect and, if necessary, reinforce the welds on 2001-2002 motorcycles free of charge. On 2003-2004 motorcycles, the units will be repaired, no inspection will be necessary. The recall began on february 9, 2005. Owners may contact honda at 1-866-784-1870.
- Service brakes, hydraulicCovers: Honda GL1800A 2002–2004, GL1800 2002–2004, VFR800 2002–2004 +4 more
Reported issue: Certain motorcycles equipped with combined-brake systems have a proportioning control valve (pcv) that mechanically proportions brake force when the rear brake is applied. A seal in some pcvs is improperly shaped, and brake fluid leakage may occur.
Possible consequence: If the motorcycle continues to be used after a leak occurs, the rear brake would eventually become inoperative. A loss of rear brake force could increase the risk of a crash.
Remedy: Dealers will inspect the rear brake forleakage. If leakage is confirmed, the dealer will replace the pcv free of charge. The recall began on january 31, 2005. Owners may contact honda at 866-784-1870.
- Structure › Frame and members › Underbody shieldsCovers: Honda GL1800A 2002–2003, GL1800 2002–2003
Reported issue: On some motorcycles, certain frame welds do not meet manufacturing specifications. High loads created when riding on rough road surfaces or through potholes can cause the affected welds to crack.
Possible consequence: The welded area could break, resulting in rear suspension collapse or lower cross member separation, increasing the risk of a crash.
Remedy: Dealers will inspect and reinforce the welds on all frames. Owner notification began during october 2003. Owners should contact honda at 1-866-784-1870.
← All problems reported for the 2002 Honda GL1800A
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 31, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.