2019 Hyundai Elantra Technical Service Bulletins

117 technical service bulletins (TSBs) are on record for the 2019 Hyundai Elantra. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10170511Dec 17, 2019Equipment, Transmission and drivetrain. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so…
• 10169380Nov 15, 2019Electrical system. If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ?P0705 - Range switch sensor circuit ?P0706 - Range switch range/performance ?P0707 - Range switch - open circuit ?P0708 - Range switch - short circuit or multiple inputs ? Symptoms: ?Malfunction Indicator Light (MIL) illuminated ?4th gear fail-safe ?No gear…
• 10169370Nov 4, 2019Back-over prevention (rear camera), Lane departure. The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the…
• 10167253Oct 14, 2019Equipment. This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
• 10167758Oct 11, 2019Equipment, Forward collision avoidance, Lane departure. Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: ? C2702 ? Control Module Missing Calibration ? C2703 ? Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.
• 10167252Oct 11, 2019Electrical system, Visibility (wipers, defrost, mirrors). Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: · C2702 Control Module Missing Calibration · C2703 Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.
• 10165456Aug 12, 2019Equipment, Electrical system. If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
• 10163279Jun 4, 2019Transmission and drivetrain. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
• 10161750May 8, 2019Transmission and drivetrain. This bulletin provides a procedure to transfer pressure data to the ECU/TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality.
• 10161684May 2, 2019Lane departure, Electrical system, Forward collision avoidance. This bulletin provides information for replacement of the Blind-Spot Collision Warning (BCW) module. Whenever the left or right side BCW module is being replaced, it is required to perform the variant coding procedure. If the variant coding procedure is not performed, a DTC C1743 (S/W mismatch) will be triggered.
• 10160106Apr 22, 2019Steering. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10160098Apr 15, 2019Electrical system, Transmission and drivetrain. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
• 10158803Mar 13, 2019Visibility (wipers, defrost, mirrors). This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual parts.
• 10154676Feb 12, 2019Electrical system. Some vehicles equipped with the wireless charging pad may experience a no charging condition. This bulletin provides information of how to diagnose the no charging condition.
• 10152860Dec 12, 2018Visibility (wipers, defrost, mirrors). On certain Elantra (AD) vehicles, the passenger side outside mirror may exhibit a whistle noise while driving. This bulletin provides the procedure to repair the outside mirror noise on the passenger side.
• 10152852Dec 4, 2018Exterior lighting. Hyundai Motor America is conducting a Service Campaign to replace the headlights and perform aiming adjustments on certain 2019 Elantra vehicles equipped with halogen headlights. Service Campaign T3J provides a service procedure to replace the headlights and perform aiming adjustments.
• 10152851Dec 4, 2018Exterior lighting. Some 2019 Elantra (AD/ADa) vehicles equipped with halogen headlights may experience intermittent operation of the high beam. This bulletin provides the service procedure to replace the left and right headlamp assemblies and perform aiming adjustments.

← All problems reported for the 2019 Hyundai Elantra