Skip to content
NHTSA investigationPE08045

Investigation PE08045: 2007–2008 Nissan Maxima

Status
CLOSED
Opened
Jul 23, 2008
Closed
Oct 24, 2008
Model years
2007–2008

Subject

Transmission hose leak

Component: Power train › Automatic transmission › Cooling unit and lines

Summary

This pe was opened for model year (my) 2008 nissan maxima vehicles based on early warning data that the automatic transmission cooler hose may have pinholes and/or cracks resulting in a transmission fluid leak.the leaked fluid can contact the exhaust system and ignite.nissan has shown that the root cause of the pinholes and/or cracks in the hose is excessive stress during the manufacture forming process resulting in hose deformation at loading onto a mandrel, or damage during un-loading.regarding loading stress, nissan states, when excessive stress is applied while loading the hose onto the mandrel, hose deformation (which looks like a bulge) can occur around the bending area.a crack will start to form on the inside of the hose at the area of deformation.regarding unloading stress, nissan states, after the curing process, in some instances the hose stuck to the mandrel tightly and the operator had to apply a significant amount of force to pull the hose from the mandrel.if this operation was performed roughly, the interior of the hose could be damaged by the mandrel edge. Nissan also states, because of the way the hoses received internal damage, a damaged hose was produced as a rare, random event rather than systematically.the transmission hose supplier, cooper standard automotive, implemented process improvements that limit excessive stress on the hose during manufacture. Nissan has shown that this transmission cooler hose was assembled on my 2007 and my 2008 maxima vehicles.nissan redesigned the transmission cooler hose on my 2009 maxima, and the hose is manufactured by a new supplier.nissan has also shown that the leaks mostly occur within the first 2000 miles of service with a severe drop in incidents beyond 2000 miles of service.most leaks have already occurred, and the one fire was minor. A safety-related defect has not been identified at this time and further use of agency resources does not appear to be warranted.accordingly this investigation is closed.the closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.the agency reserves the right to take further action if warranted by the circumstances.

An NHTSA investigation looks into whether a safety defect exists. Opening one is not a finding. Outcomes can include a recall, closure without action, or further inquiry.

Model years covered

About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 27, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.