2015 Jaguar F-Type Technical Service Bulletins

502 technical service bulletins (TSBs) are on record for the 2015 Jaguar F-Type. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10097047Dec 16, 2015Brakes, Equipment. "issue: submitting a brake noise epqr. Specifically related to front brake disc grooving causing a noise and /or judder issue. Cause: under investigation"
• 10097033Dec 14, 2015Fuel system. "situation: the fuel tank may be difficult to fill, with the fuel delivery 'cutting out' several times. Cause: this may be caused by an insufficient flow rate of the fuel tank filler pipe."
• 10096885Nov 23, 2015Electrical system, Equipment. "situation: the vehicle battery may be flat or one of the following messages/warning lights may be displayed on the instrument cluster. • faulty generator • faulty battery monitoring system (bms) • the charge warning indicator is illuminated when the engine is running cause: the power supply is a fully integrated system that requires sdd to diagnose overall functionality robustly to make sure customer satisfaction…
• 10096883Nov 13, 2015Electrical system. "situation: the vehicle battery may be flat or one of the following messages/warning lights may be displayed on the instrument cluster. • faulty generator • faulty battery monitoring system (bms) • the charge warning indicator is illuminated when the engine is running cause: the power supply is a fully integrated system that requires sdd to diagnose overall functionality robustly to make sure customer satisfaction…
• 10226156Nov 11, 2015Transmission and drivetrain, Engine cooling. Loss Of Drive Or Flashing Gear Selector LED Indicator
• 10096881Nov 11, 2015Equipment, Engine, Transmission and drivetrain, Electrical system. "situation: one of the following issues may occur: • the gear selector led indicator flashes and neutral is involuntarily engaged when coming to a stop. • the instrument cluster has switched off after an automatic engine stop and driver exit conditions do not exist and the vehicle does not automatically restart the engine upon releaseof the brake pedal (note: diagnostic trouble code [dtc] p162f-00 may be stored in…
• 10096841Nov 9, 2015Electrical system, Engine. Address concerns with the correct operation of the ozygen (o2) sensors
• 10097053Nov 6, 2015Electrical system. "issued dec 2015. Issue vehicles battery claims for battery discharged. Cause the battery storage process has not been correctly followed upon vehicle delivery and following a pdi."
• 10203423Nov 4, 2015Wheels. Wheel Stud Overload Failures
• 10096888Nov 4, 2015Equipment, Wheels. "issue: wheel stud failures (fractures). Cause: overload fracture due to incorrect torque being applied or incorrect process application and sequence being applied to the wheel stud following wheel removal and refit."
• 10096887Nov 2, 2015Engine, Electrical system. "situation: to address concerns with the correct operation of the oxygen (o2) sensors, updated engine control module (ecm) software is required on the models, engine variants, and vehicle identification number (vin) ranges as listed in the affected vehicle range.
• 10096844Nov 2, 2015Equipment, Engine. "situation: one or more fo the following issues may be evident when using the smart key: • engine fails to crank; • 'smart key not found' message displayed in the instrument cluster; • vehicle may not unlock / lock when using passive entry or when pressing a smart key button. Cause: this may be caused by a 'lock up' of the keyless vehicle module (kvm)."
• 10097086Oct 29, 2015Electrical system. "issue: customers may report whilst pressing the auto stop/start button in their vehicle, a warning message may be displayed in the instrument cluster - auto stop/start not available. Dtc b12cd-87 will be logged in the gateway module gwm). Cause: the ignition live input into the vehicle quality module (vqm), may have a poor connection, and/or no lin circuit between the vqm & gwm."
• 10097084Oct 29, 2015Engine cooling, Engine. "issue: the customer may observe a mil in the instrument cluster relating to the engine system (check engine light) and one or more codes stored in the pcm relating to heated oxygen sensor (ho2s) in the exhaust system.
• 10097085Oct 23, 2015Electrical system, Equipment. "issue: when using the incontrol touch map updater, there have been isolated reports of stability concerns during activating or updating the secure digital (sd) card. Cause: version 2.2 of the incontrol touch map updater released had the above concern."
• 10096826Oct 13, 2015Equipment, Electrical system. "situation: vibrations and/or rattles may be evident when listening to the entertainment system. Cause: this may be caused by trim and/or wiring contact."
• 10096825Oct 7, 2015Electrical system, Equipment. "situation: vibrations and/or rattles may be evident when listening to the entertainment system. Cause: this may be caused by trim and/or wiring contact."
• 10096822Oct 7, 2015Engine, Electrical system. "situation: the engine malfunction indicator lamp (mil) may be illuminated. Upon diagnosis, the technician may find diagnostic trouble codes (dtc) relevant to the mid-catalyst and post-catalyst heated oxygen sensors (ho2s) -- p0036, p0037, p0038, p0042, p0043, p0044, p0054, p0055, p0056, p0057, p0058, p0060, p0061, p0062, p0063, p0064, p0136, p013a, p013c, p013e, p0141 , p0141, p0142, p0143, p0144, p0147, p014a…
• 10096763Sep 30, 2015Fuel system. "situation: the fuel tank may be difficult to fill, with the fuel delivery 'cutting out' several times. Cause: this may be caused by an insufficient flow rate of the fuel tank filler pipe."
• 10096747Sep 29, 2015Engine, Fuel system. "situation: a metallic 'clicking' / 'rasping' noise may be evident from the engine. The noise may be more noticeable when the engine is at idle speed and when the engine is cold. Cause: this may be caused by a noisy high pressure fuel pump outlet valve."
• 10096786Sep 18, 2015Electrical system. "issue only applicable to software versions 30.3 (gen 3) fk72-14c104-af and 29.3 (gen 2) dpla-14c104-ag when checking for fault codes logged in the kvm (keyless vehicle module) also known as the rfa (remote function actuator) f000- 63/u3000-63, control module - circuit/ component protection time-out is logged. Cause this dtc is set when the kvm has gone through a “self reset”"
• 10096745Sep 15, 2015Equipment. "situation: the face of the compact key handset may peel away from the handset main body or the handset case may be bulging. Cause: this may be caused by the handset manufacturing process."
• 10096749Sep 11, 2015Exterior lighting, Electrical system. "situation: the adaptive front lighting system (afs) warning lamp may be illuminated/flashing on the instrument cluster. Upon diagnosis, the technician may find diagnostic trouble codes (dtc) b1d64-87 and/or b1d65-87 stored in the headlamp leveling control module. Cause: this may be caused by a software error within the headlamp leveling control module."
• 10096815Sep 10, 2015Seat belts. "issue: customer reports that they can hear a creaking/ticking noise while driving coming from the seatbelt in their f-type. Cause: in the as-worn condition, the seatbelt webbing can come in contact with the seat material. This condition can be present or not depending on occupant size, shape and seat position. Under dynamic inputs, the webbing can rub across the seat material and creating a creaking/ticking noise…
• 10096782Sep 3, 2015Equipment. "issue jaguar are currently investigating body control modules (bcm) and remote function actuators (rfa) replaced for a non-start condition. Following supplier analysis the modules have been categorised as ""no fault found"". Cause currently under analysis."
• 10096642Aug 25, 2015Transmission and drivetrain. "situation: an oil leak may be evident from underneath the vehicle or discovered during routine service. Cause: the cause may be unknown."
• 10096699Aug 24, 2015Equipment. "issue b1412-96 being flagged in the gateway module cause under investigation."
• 10096616Jul 13, 2015Electrical system. "issue: when using the incontrol touch map updater to activate a secure digital (sd) card there is not an onscreen message to confirm the activation has been completed successfully. Cause: a new version of the incontrol touch map updater was released in sdd 142.03. When using the new version for the first time it may not display a confirmation message advising the activation of the sd card has been successful."
• 10096611Jul 7, 2015Electrical system. "issue: on monday 6th july between 5am and 9am (gmt+1:00) users will be unable to activate the secure digital (sd) card using the incontrol touch map updater on symptom driven diagnostics (sdd) as the message ‘connection error’ will be displayed. After this time, all sdd machines on software level 142.02 or earlier will not be able to activate sd cards as 'connection error' will be displayed.
• 10058422Jul 1, 2015Transmission and drivetrain. Jaguar: when at a stop, transmission appears in neutral even when transmission control switch was not moved and gear position indicator and instrument cluster flashing d or s in message cluster. Model 2014-16 f-type (x152), 2013-15 xf (x250), xj range (x351.
• 10079041Jun 26, 2015Electrical system. "situation: the surface of the instrument cluster lens may be damaged or marked. Cause: a lower-level service repair part is now available in the event damage or marking is caused by an object impacting against the lens and/or staining/discoloration contamination caused by using any type of cleaning product on the lens."
• 10079081Jun 17, 2015Equipment. "issue: customer complains of damage/marking on the surface of the vehicle’s instrument pack lens. Cause: damage/marking caused by object impact against the lens. Staining/discoloration contamination caused by using any type of cleaning product on lens."
• 10079082Jun 11, 2015Electrical system. "issue b1412-96 being flagged in the gateway module cause under investigation."
• 10096582May 19, 2015Engine. "situation: a 'humming' noise may be evident from the engine when the engine is idling. Cause: this may be caused by dust and/or water ingress to the primary drive belt idler pulley bearing."
• 10096579May 19, 2015Engine cooling, Engine. "situation: the fluid level in the engine coolant system expansion tank may fall below the minimum level over a period of time or a ‘low coolant level’ message is displayed in the message center. Upon inspection, a leak may be found to be from the front of the engine-driven coolant pump, together with excessive wear of the coolant pump bearing."
• 10096585May 11, 2015Electrical system. "I s sue repor ts have been received of users being unable to activate a secure digital (sd) card, as they experience a 'connect ion er ror ' when using the incont rol touch map updater tool on symptom driven diagnost ic (sdd). Caus e the sdd machine has not been able to communicate to the server dedicated for the incont rol touch map updater tool ."
• 10096584May 5, 2015Electrical system. "issue: when a new map update is released for the incont rol touch system, users may not be able to complete the map update on the secure digi tal (sd) card. Cause: when the sd card was act ivated, the user selected the incor rect vehicle brand ‘ incont rol touch’ map updater tool ."
• 10096569Apr 8, 2015Equipment. "situation: the face of the compact key handset may peel away from the handset main body or the handset case may be bulging. Cause: this may be caused by the handset manufacturing process."
• 10096601Apr 1, 2015Transmission and drivetrain, Electrical system. "situation: after coming to a stop, the vehicle will not move off and the transmission may appear to be in neutral even though the transmission control switch has not been moved. The transmission gear position indicator on the gear selector and in the instrument cluster message center may be flashing 'd' or 's'. If the engine is stopped and restarted or neutral (n) or park (p) and then drive (d) or sport (s) is…
• 10096535Mar 20, 2015Transmission and drivetrain. "situation: after coming to a stop, the vehicle will not move off and the transmission may appear to be in neutral even though the transmission control switch has not been moved. The transmission gear position indicator on the gear selector and in the instrument cluster message center may be flashing 'd' or 's'. If the engine is stopped and restarted or neutral (n) or park (p) and then drive (d) or sport (s) is…
• 10096534Mar 19, 2015Equipment, Engine. "situation: a metallic 'clicking' / 'rasping' noise may be evident from the engine. The noise may be more noticeable when the engine is at idle speed and when the engine is cold. Cause: this may be caused by a noisy high pressure fuel pump outlet valve."
• 10096533Mar 6, 2015Fuel system, Engine, Equipment. "situation: a metallic 'clicking' / 'rasping' noise may be evident from the engine. The noise may be more noticeable when the engine is at idle speed and when the engine is cold. Cause: this may be caused by a noisy high pressure fuel pump outlet valve."
• 10096516Feb 27, 2015Steering. "issue: a steering wheel shimmy may be evident during the pre-delivery inspection (pdi) road test due to temporary flat spots on the rolling surface of the tire. Cause: temporary flat spots naturally develop on the rolling surface of a tire when the wheels of the vehicle are stationary over a period of time."
• 10096525Feb 25, 2015Equipment. "issue: navigation sd card fails to initialise on f type with nli cause: possible incorrect sd card or incorrect version of the update tool"
• 10096520Feb 13, 2015Body and structure. "issue: jlr are investigating the cosmetic appearance of the painted rear brake calipers fitted to f type vehicles. Cause: unknown at this time."
• 10096509Feb 3, 2015Equipment, Body and structure. "situation: a buzzing noise coming from the rear left of the vehicle may be evident, occurring predominantly at low speeds. Cause: this may be caused by the orientation of the active exhaust vacuum pump against the vehicle body, which amplifies the pump vibrations."
• 10096507Jan 29, 2015Transmission and drivetrain, Electrical system. "issue: for the models identified above, a concern has been identified with the latest tcm software released on dvd 139 patch 15. Cause: currently under investigation with jlr engineering."
• 10096506Jan 29, 2015Engine, Equipment. "issue: a customer may report that their f-type vehicle is too loud when starting the engine. The initial 'start-up roar' may be audible for a few seconds before the rpm drops to a quieter level. This may be reported by customer owners of both v6 & v8 engine derivatives. Cause: jlr engineering are currently investigating this matter."
• 10096473Jan 28, 2015Equipment, Transmission and drivetrain. "situation: a 'knock' / 'clonk' noise may be evident from the driveline when: • shifting transmission between drive (d) and reverse (r) when stationary; • shifting transmission between drive (d) and reverse (r) at low speeds (parking or low-speed maneuvering); and/or • when braking from approximately 25 mph (40 km/h). Cause: this may be caused by the geometry of the transmission output flange allowing excessive…
• 10096505Jan 20, 2015Equipment, Fuel system. "issue: high pressure fuel pump diagnostics on 3.0l aj126 and 5.0l aj133 engines have been updated. Action: please refer to the procedure below for information on how to access the new information through sdd."

← All problems reported for the 2015 Jaguar F-Type