2018 Kenworth T680Recall report

2018 Kenworth T680 Recalls

NHTSA lists 15 recall campaigns for the 2018 Kenworth T680. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

24V145000Feb 23, 2024936 vehicles potentially affected
Service brakes, air › Supply › Reservoir/tank
Covers: Kenworth T680 2015–2024, T800 2009–2024, C500 2009–2021 +5 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply…
Possible consequence: Insufficient air volume can reduce braking performance and increase the risk of a crash.
Remedy: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.
Full campaign details →
22V277000Apr 25, 202217,641 vehicles potentially affected
Steering › Critical fasteners
Covers: Kenworth T680 2018–2020, Peterbilt 567 2018–2020, Kenworth T370 2018–2020 +12 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Possible consequence: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Remedy: Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.
Full campaign details →
21V00N000Dec 29, 20211,107 vehicles potentially affected
Electrical system › Wiring
Covers: Kenworth T680 2016–2022, Peterbilt 579 2016–2022, 567 2016–2022 +4 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system loses power.
Possible consequence: The operator may be unaware of a system malfunction or the presence of excessive methane levels, increasing the risk of injury or fire.
Remedy: Dealers will re-wire the warning alarm, free of charge. Owner notification letters were mailed December 1, 2022. Owners may contact Peterbilt customer service at 1-940-591-4220, and Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 21KWH and 21PBN.
Full campaign details →
20V593000Sep 28, 20201,416 vehicles potentially affected
Service brakes, air › Antilock
Covers: Kenworth T680 2016–2021
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2016-2021 Kenworth T680 trucks equipped with a 2.1m Cab and WABCO 6S/6M ABS brake system with drum brakes. The brake systems were manufactured with a standard rear-brake ABS modulator valve instead of a quick release valve, which may exceed the intended service-brake release timing. As such, these vehicles fail to comply with the requirements of Federal Motor…
Possible consequence: Longer than expected service-brake release timing may lengthen vehicle stopping distance, increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will replace the standard rear-brake, ABS modulator valve with a quick release valve, free of charge. The recall began November 30, 2020. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 20KWD.
Full campaign details →
20V199000Apr 6, 2020460,515 vehicles potentially affected
Service brakes, air › Antilock › Abs warning light
Covers: Kenworth T680 2011–2020, T800 2008–2020, T270 2008–2020 +16 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not…
Possible consequence: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at…
Full campaign details →
19V275000Apr 5, 20191,837 vehicles potentially affected
Parking brake
Covers: Kenworth T680 2018–2020, T880 2018–2020
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 T680 and T880 tandem axle vehicles equipped with a parking brake on a single axle and certain models of automated manual transmissions. During cold temperatures, the signal from the park brake pressure switch to the transmission controller may be delayed possibly resulting in the vehicle moving unexpectedly.
Possible consequence: Unexpected vehicle movement may increase the risk of a crash or injury.
Remedy: PACCAR will notify owners and dealers will replace the park brake pressure switch, free of charge. PACCAR issued owners and interim notification on June 3, 2019. The recall began August 6, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 19KWB.
Full campaign details →
18V931000Dec 21, 201825,556 vehicles potentially affected
Power train › Clutch assembly
Covers: Kenworth T680 2018–2019, Peterbilt 567 2018–2019, Kenworth T370 2018–2019 +12 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Possible consequence: Unintended movement of a vehicle can increase the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's numbers for this recall are 18PBE and 18KWH.
Full campaign details →
18V870000Dec 7, 20186,857 vehicles potentially affected
Seat belts › Front › Buckle assembly
Covers: Kenworth T680 2018, Peterbilt 567 2018, 579 2018 +1 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2018 Kenworth T680 and T880, and Peterbilt 567 and 579 trucks. The seat belt buckle assemblies on these vehicles may have been glued and not sewn during manufacturing, possibly causing the assembly to come apart under load, such as in the event of a crash.
Possible consequence: If the seat belt buckle assembly separates, it can prevent the occupant from being properly restrained in the event of a crash, increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will replace the seat belt buckle assemblies that were not sewn, free of charge. PACCAR issued owners an interim notification on February 4, 2019. The recall began February 28, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's numbers for this recall…
Full campaign details →
18V816000Nov 16, 20181,619 vehicles potentially affected
Exterior lighting
Covers: Kenworth T680 2013–2019, Peterbilt 579 2013–2019, Kenworth T880 2013–2019
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2013-2019 Kenworth T680 and T880 and Peterbilt 579 trucks, greater than 30 feet long and equipped with side extender mounted intermediate marker lamp/turn signals that do not include a reflex reflector. Since both intermediate side marker lamps and reflex reflectors are required, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety…
Possible consequence: Missing reflex reflectors can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.
Remedy: PACCAR will notify owners and dealers will install reflex reflective tape, free of charge. The recall began January 15, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 18KWF, and 18PBC.
Full campaign details →
18V657000Sep 21, 201848,896 vehicles potentially affected
Engine and engine cooling › Engine › Diesel
Covers: Kenworth T680 2017–2019, Peterbilt 567 2017–2019, 389 2017–2019 +9 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.
Possible consequence: If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
Remedy: Cummins will notify owners, and dealers will replace the suspect fuel pump cooling circuit screen, free of charge. The recall began November 21, 2018. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 18E081.
Full campaign details →
18V368000Jun 1, 201885,626 vehicles potentially affected
Electronic stability control (esc)
Covers: Kenworth T680 2015–2018, T880 2015–2018, T800 2015–2018 +4 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 567 and 579 trucks and 2015-2018 Kenworth T660, T680, T800, T880 and W900 trucks. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of…
Possible consequence: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on July 30, 2018. Owners may contact Peterbilt customer service at 1-918-259-3258 or Kenworth customer service at 1-425-828-5000.
Full campaign details →
18V092000Feb 2, 20181,938 vehicles potentially affected
Electrical system › Instrument cluster/panel
Covers: Kenworth T680 2017–2018, Peterbilt 567 2017–2018, 579 2017–2018 +1 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Kenworth T680 and T880 trucks, and Peterbilt 567 and 579 trucks, all equipped with an automated Eaton UltraShift Plus or Eaton Advantage Transmission with right hand stalk shifter. The display that indicates which transmission gear the driver selected may display incorrectly. The display can indicate 'N' when the shifter is set into 'D' or 'R', and the as…
Possible consequence: A truck that does not move as expected can increase the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will install a transmission software update, free of charge. The recall began on March 9, 2018. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 18KWA and 118-A.
Full campaign details →
17V840000Dec 22, 20171,222 vehicles potentially affected
Power train › Automatic transmission › Control module (tcm/pcm/tecm)
Covers: Kenworth T680 2018, Peterbilt 567 2018, 579 2018 +1 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2018 Peterbilt 567, 579, Kenworth T680, and T880 trucks, equipped with certain Eaton Endurant and PACCAR AMT transmissions. The transmission control module (TCM) may allow the engine to crank briefly even if the transmission shifter is not in neutral. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number…
Possible consequence: If the transmission is not in neutral when the engine begins running, there may be unintended vehicle movement, increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the TCM software, free of charge. The recall began February 6, 2018. Owners may contact Peterbilt customer service at 1-940-591-4000, or Kenworth customer service at 1-425-828-5000. PACCAR's numbers for this recall are 1217F and 1717KWF.
Full campaign details →
17V443000Jul 13, 20171,737 vehicles potentially affected
Fuel system, diesel
Covers: Kenworth T680 2018, Peterbilt 567 2017–2018, 389 2017–2018 +6 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 367, 389, 567, 579 and 587 trucks, and 2018 Kenworth C500, T680, T800, T880 and W900 trucks equipped with Cummins ISX 15L engines. These engines have a fuel pump whose drive gear could possibly slip on its drive shaft, causing a fuel pump function loss, resulting in an engine stall.
Possible consequence: An engine stall can increase the risk of a crash.
Remedy: Cummins will notify the vehicle purchaser, and Cummins dealers will replace the fuel pumps, free of charge. The recall began July 1, 2017. Owners may contact Cummins customer service at 1-800-286-6467 or PACCAR customer service at 1-425-468-7400. PACCAR's number for this recall is C1909.
Full campaign details →
17V103000Feb 15, 2017465 vehicles potentially affected
Fuel system, other › Delivery › Hoses, lines/piping, and fittings
Covers: Kenworth T680 2015–2018, T880 2015–2018, Peterbilt 567 2017–2018 +1 more
Reported issue: PACCAR Incorporated (PACCAR) is recalling certain 2015-2018 Kenworth K370, T680, T880 and 2017-2018 Peterbilt 567 and 579 trucks. The plastic fuel tee fittings on these trucks may leak fuel.
Possible consequence: A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: Kenworth and Peterbilt will notify owners, and dealers will replace the suspect fuel tees, free of charge. The recall began on April 13, 2017. Owners may contact Kenworth customer service at 1-425-828-5000 and Peterbilt customer service at 1-940-591-4000. PACCAR's numbers for this recall is 17KWA and 217-A.
Full campaign details →

NHTSA investigations

PE21018Haldex Brake Chamber FailuresClosed · Jul 16, 2021

← All problems reported for the 2018 Kenworth T680

About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 31, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.