2006 Land Rover Range Rover Sport Technical Service Bulletins

88 technical service bulletins (TSBs) are on record for the 2006 Land Rover Range Rover Sport. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 11017768Apr 28, 2025Engine. Engine Will Crank, No Start When At Operating Temperature
• 11017767Apr 28, 2025Engine. Engine Will Crank, No Start When At Operating Temperature
• 11017740Apr 11, 2025Electrical system. Leaking windshield that caused the water ingress on the electrical component.
• 11016648Mar 14, 2025Brakes. There have been several FRED submissions for a customer allegation of brake judder/vibration.
• 11016647Mar 14, 2025Brakes. There have been several FRED submissions for a customer allegation of a brake noise concern.
• 11016646Mar 14, 2025Brakes. There have been several FRED submissions for a customer allegation of a rear brake warning being illuminated on the instrument cluster.
• 11011035Nov 27, 2024Other or unknown. Front / Rear Door Latch - Silicon Contamination Causing Doors To Not Operate As Expected
• 11010266Oct 14, 2024Other or unknown. Customer may report a concern with Apple CarPlay or Android Auto function after recent updates to their mobile device.
• 10155601Feb 22, 2019Seats. Seat height operates in increments and seat memory function will not work after replacement of seat height motor. Diagnostic Trouble Code (DTC) B1B87-31, stored in Driver Seat Module (DSM) or Passenger Seat Module (PSM) Note that the seat height motor is supplied as part of the cushion sub-assembly or motor sub-assembly (depending on model)
• 10146148Jun 27, 2018Latches, locks and linkages. Issue: This SSM is to support the description provided in Technical Bulletin LTB00631 for compact key low level repair.
• 10136669Mar 8, 2018Electrical system. The 'Service Required' warning text will not appear on the Instrument Cluster (IC) if a vehicle has reached its service point.
• 10125267Sep 14, 2017Equipment. Presentation from Dealer Shop Foreman Conference Call
• 10105863Oct 30, 2015Electrical system, Equipment. "issue the wrong component maybe replaced when troubleshooting bluetooth connectivity in car. Cause the front control display interface module(touchscreen) has no effect on bluetooth connectivity in the car and as such may be incorrectly diagnosed and replaced as the source of the issue."
• 10105821Oct 5, 2015Equipment, Body and structure, Visibility (wipers, defrost, mirrors). "situation: the door mirror may 'judder' during powerfold (manual or automatic) operation and/or may be loose or vibrates. Cause: this may be caused by a tolerance stack-up between the door mirror and the door and/or the retaining screws may be loose/under torqued."
• 10105818Oct 5, 2015Visibility (wipers, defrost, mirrors). "situation: the rear window wiper motor may be inoperative. Cause: this may be caused by internal mechanism components becoming worn."
• 10105722Sep 28, 2015Visibility (wipers, defrost, mirrors). "situation: the upper windshield finisher may be loose or a wind noise may be evident. Cause: this may be caused by body tolerances in relation to the upper windshield finisher profile"
• 10105723Sep 21, 2015Visibility (wipers, defrost, mirrors). "situation: the windshield wipers may make a squeak noise, judder, or streak the windshield. Cause: this may be caused by a build-up of dirt and grease on the surface of the windshield glass."
• 10105726Sep 16, 2015Visibility (wipers, defrost, mirrors), Body and structure. "situation: the door mirror may 'judder' during powerfold (manual or automatic) operation and/or may be loose or vibrates. Cause: this may be caused by a tolerance stack-up between the door mirror and the door and/or the retaining screws may be loose/under torqued."
• 10105721Sep 1, 2015Body and structure. "situation: the exterior a-pillar molding may become loose. Cause: this may be caused by the molding's retaining clips losing tension."
• 10105538Jul 23, 2015Equipment. "issue: a customer may report a concern that when the vehicle is started there is no cabin audio at all from any sources. If the nav button is pressed a 2-5 second period of am/ fm radio can be heard and then returns back to no audio. Issue will only self-recover after an ignition cycle. Cause: currently under analysis."
• 10104881Jun 16, 2015Body and structure. "situation: the exterior a-pillar molding may become loose. Cause: this may be caused by the molding's retaining clips losing tension."
• 10105466Apr 3, 2015Equipment. "issue over half of failed radio head units or separate cd players are found to have been loaded with incorrect media which is not compatible with land rover infotainment systems. Cause this is to make you aware of the types of media that may cause the unit to fail with the customer."
• 10105282Mar 16, 2015Equipment, Seats. "issue: seat switch pack recline button cap is damaged or has broken / fallen off in service. (see fig.1) action: replace by pressing on new button cap part no: lr045801 (see fig.2)"
• 10105405Mar 5, 2015Electrical system. "issue only applicable to software versions 30.3 (gen 3) fk72-14c104-af and 29.3 (gen 2) dpla-14c104-ag when checking for fault codes logged in the kvm (keyless vehicle module) also known as the rfa (remote function actuator) f000-63/u3000-63, control module - circuit/ component protection time-out is logged. Cause this dtc is set when the kvm has gone through a “self reset”"
• 10104381Feb 25, 2015Electrical system. "issue: land rover are currently analyzing body control modules (bcm) returned via warranty. If a bcm has been determined to require replacement following diagnosis, please carry out the steps listed in the action below. Cause: currently under analysis."
• 10104241Feb 11, 2015Equipment, Electrical system. "issue: customer complains of damage/marking on the surface of the vehicle’s instrument pack lens. Cause: damage/marking caused by object impact against the lens. Staining/discoloration contamination caused by using any type of cleaning product on lens. Important: owners handbook specifies to clean with a lightly moistened cloth and do not use chemical agents or domestic cleaners action where a customer concern is…
• 10104201Feb 4, 2015Equipment. "issue over half of failed radio head units or separate cd players are found to have been loaded with incorrect media which is not compatible with land rover infotainment systems. Cause this is to make you aware of the types of media that may cause the unit to fail with the customer. They are copy control compact discs (cccd) recordable compact discs (cd-r) rewritable compact discs (cd-rw) eco discs, which are very…
• 10106041Jan 5, 2015Equipment, Transmission and drivetrain, Exterior lighting. "issue: excessive brake pedal pressure required to get the auto transmission out of park, warning lights on the instrument pack with associated dtc's for brake light switch (p0504-27, p0504-62, c1a96-64) or brakes showing signs of drag and binding. Cause: incorrect brake light switch setting. Note: analysis of returned brake switches have shown no issues with the brake switch itself. Do not replace the switch…
• 10106022Jan 5, 2015Brakes. "re-issued dec 2015 issue: brake caliper discolouration. Cause: damage to the caliper finish while cleaning the vehicle and, or the road wheels"
• 10106021Jan 5, 2015Steering. "re-issued dec 2015 issue: when completing a repair on components in the power assisted steering system, debris may be found within the power steering fluid system which could lead to system contamination and a deterioration in system performance. Cause: internal debris from a suspected component malfunction may result in the power steering fluid becoming contaminated."
• 10103723Jan 5, 2015Tires, Wheels. "issue: a customer may experience a vibration from the vehicle whilst travelling along a smooth road surface at speeds greater than 45 mph/72 kph. Cause: wheel and tyre assemblies out of balance due to water inside the wheel and tyre assemblies. See attachment for example."
• 10103462Jan 5, 2015Steering. "issue: an oil leak may be detected from the steering gear and incorrectly diagnosed as needing a replacement steering gear assembly. Cause: leak from the wagner/steering gear damping valve or sealing washer (see attached photo's)"
• 10103461Jan 5, 2015Suspension. "issue: a customer may report suspension low on one side or dropping when left parked. Cause: air leak from a front or rear air spring to damper lower seal."
• 10103442Jan 5, 2015Suspension. "issue: a review of front lower control arm warranty returns from various markets has shown that arm assemblies have been incorrectly changed for knock issues when the front bush is cracked and should have been replaced as per technical service bulletins ltb00204v4 and ltb00123v4. Cause: incorrect diagnosis of front and rear bush issues. See attached photo showing an example of a cracked front bush."
• 10103441Jan 5, 2015Suspension. "issue: misdiagnosis of minor fluid leaks from the stabilizer bar. Action: in order to correctly diagnose the leak path on a stabilizer bar, clean the suspected area thoroughly and confirm if the leak is from the pipe o-rings, the stabilizer bar hydraulic seal or somewhere else. If found to be from the pipe o-rings (see attached document), these are serviceable parts and should be replaced.
• 10103423Jan 5, 2015Tires. "issue. A customer may report uneven tyre wear on vehicles fitted with 20 inch wheels and continental 4x4 sport contact tyres. Cause. With reference to the photo attached, due to the tread pattern design of this tyre, there can appear to be inner or outer shoulder wear. This is in fact just the natural tread wear, but as the design of the lateral grooves continues around to the sidewall, the very ends of the…
• 10103683Dec 12, 2014Steering. "issued january 2015. Issue: a customer may complain of a squeak or creak from the steering column area on rotation of the steering wheel. Range rover sport l320 only. Cause: the power steering pinion seal lacks lubrication and dries out."
• 10102683Oct 28, 2014Fuel system, Engine. "issue: reports have been received of engine damage occurring, which is caused by the use of non-approved engine induction / fuel injection cleaning equipment or materials. This includes, but is not limited to, ""vacu-flush"" type equipment. Cause: the use of non-approved equipment can cause the engines to hydro-lock, or cause other engine damage, and sometimes the only possible repair is to replace the engine."
• 10102101Aug 26, 2014Equipment. "issue: discoloration or peeling of the front or rear land rover or range rover badge"
• 10102003Aug 26, 2014Equipment. "issue: land rover engineering have been monitoring reports for lack of cooling from the air conditioning system on higher time in service vehicles, where insufficient performance of the air conditioning compressor has been found to be the root cause of the issue. Compressor part no. Lr010723 & lr013934"
• 10102063Aug 15, 2014Steering. "issue: when investigating a customer reported steering issue it is found that there is oil/fluid present around the steering gear input shaft. Cause: oil or grease leak past input shaft seal through normal use or seal failure."
• 10101886Aug 5, 2014Visibility (wipers, defrost, mirrors), Body and structure. "situation: the door mirror may 'judder' during powerfold (manual or automatic) operation. Cause: this may be caused by a tolerance stack-up between the door mirror and the door."
• 10101861Aug 5, 2014Electrical system, Equipment. "situation: the dynamic response system red warning lamp may be illuminated on the instrument cluster and diagnostic trouble codes (dtc) c1119-62, c1119-09, and/or c1b11-62 may be stored, possibly indicating system contamination. This technical bulletin provides a process for retailers to correctly diagnose dynamic response system contamination, to identify if an actuator has failed, and to determine which parts…
• 10101681Jul 29, 2014Electrical system, Equipment. "issue: the touch screen display (tsd) also known as front control display interface module (fcdim) or high level display front (hldf) on occasions may fail to download software correctly resulting in no communications with the module and blank screen. Cause: this may be as a result of low battery voltage or a break in continuity of diagnostic connection during the download"
• 10101804Jul 17, 2014Electrical system. "issue a number of alternators are being replaced under warranty and are found to be faulty due to internal regulator chip damage. Cause alternators are being damaged due to cross polarity when the vehicle is jump started."
• 10101721Jul 11, 2014Transmission and drivetrain. "issue: brake noise from front axle (with brembo brakes only) cause: under investigation"
• 10101802Jul 3, 2014Equipment. "issue: customer complaint of noise from facia when travelling over certain road conditions. Cause: jlr engineering have found during their investigations that the instrument panel upper section speaker aperture bolt may have a relaxed torque (see topix workshop manual section 76.46.04 fig. E12471)"
• 10101762Jul 1, 2014Engine. "issue: customers report a repeat issue of engine noise from the timing chain system, after the vehicle had previously been repaired. Cause: the timing chain was not at the correct tension. This was caused by the full repair procedure in tsb ltb00474 not being followed - a complete set of timing chain tensioners and blades were not fitted."
• 10101604May 9, 2014Engine, Electrical system. Situation: multiple warning lights may be displayed on the instrument cluster. Cause: this may be caused by corroded chassis wiring harness at the rear left-side chassis-to-body connector.
• 10101625May 1, 2014Equipment. Technical updates related to bulletins referenced in document.

← All problems reported for the 2006 Land Rover Range Rover Sport