2010 Land Rover Range Rover Sport Technical Service Bulletins

347 technical service bulletins (TSBs) are on record for the 2010 Land Rover Range Rover Sport. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10103261Dec 12, 2014Steering. "issue: a customer may complain of a squeak or creak from the steering column area on rotation of the steering wheel. Range rover sport l320 only. Cause: the power steering pinion seal lacks lubrication and dries out."
• 10106344Nov 12, 2014Visibility (wipers, defrost, mirrors). "issue: customers / dealers may report a concern with the operation of the front or rear window regulators cause: various conditions that contribute to the operation of the window regulator not operating"
• 10204853Nov 10, 2014Electrical system. Emissions Recall: Engine Malfunction Indicator Lamp Illuminated
• 10106362Nov 6, 2014Seats. "issue customers / dealers may report a concern with the condition of seat covers cause lack of understand of leather as a natural product and the conditions it may cause."
• 10224523Oct 31, 2014Back-over prevention (rear camera). Technical Bulletin: Supercharger 'Clattering' /'knock'/ 'Rattle' Noise 5.0 S/C V8 Engine.
• 10214045Oct 31, 2014Engine. Technical Bulletin: Supercharger 'Clattering' /'knock'/ 'Rattle' Noise 5.0 S/C V8 Engine.
• 10102561Oct 31, 2014Engine. "situation: a ‘clattering’ / 'knock' / 'rattle' noise may be heard from the engine. Cause: this may be caused by torsional isolator and/or the torsional isolator spring support shaft wear causing excessive backlash in the supercharger drive."
• 10102683Oct 28, 2014Fuel system, Engine. "issue: reports have been received of engine damage occurring, which is caused by the use of non-approved engine induction / fuel injection cleaning equipment or materials. This includes, but is not limited to, ""vacu-flush"" type equipment. Cause: the use of non-approved equipment can cause the engines to hydro-lock, or cause other engine damage, and sometimes the only possible repair is to replace the engine."
• 10102782Oct 24, 2014Electrical system. "concern: jaguar land rover and the supplier have inspected 101 warranty claims for heated oxygen sensors (ho2s). 23% were found to have no defects. Cause: one possible reason for this is that all ho2s sensors are replaced when only one is unserviceable"
• 10102781Oct 22, 2014Equipment. "issue we have received a number of reports that land rover customers are reporting that the centre console front and rear* cooler box are not operating cause customer perception"
• 10204836Oct 20, 2014Equipment. Technical Bulletin: Adaptive Damping Warning Indicator Diskplayed On The Instkrument Cluster
• 10102621Oct 20, 2014Electrical system. "situation: the adaptive damping warning indicator may be illuminated on the instrument cluster and upon investigation diagnostic trouble codes (dtc) c110c-14, c110d-14, c110e-14, and/or c110f-14 may be present. Cause: this may be caused by the wiring to the adaptive damper being damaged from fatigue attributed to the rotation of the damper during normal vehicle maneuvering."
• 10071138Oct 20, 2014Electrical system. Summary to be provided on a future date.
• 10102761Oct 18, 2014Steering. "issue: a customer may report a noise when turning the steering wheel, which is confirmed by the dealer as originating from the steering column. Discovery 4/lr4 (l319) and range rover sport (l320) only. 10 model year onwards. Cause: jlr engineering are currently investigating to understand any situations where the steering column is the cause of noise when turning."
• 10102704Oct 18, 2014Engine cooling. "issue: low coolant message displayed. A coolant leak is found from the seam on coolant pipe (lr018275). See the attached file for an example of the leak location. Cause: a process issue at component supplier."
• 10204737Oct 10, 2014Electrical system, Other or unknown, Fuel system. Technical Bulletin: Fuel Gauge Operation Inaccuate
• 10102562Oct 10, 2014Fuel system. "situation: the fuel gauge may be inoperative or inaccurate. Cause: these issues may be caused by fretting corrosion across the fuel sender harness pins inside the fuel tank."
• 10102721Oct 2, 2014Equipment, Electrical system. "issue the wrong component maybe replaced when troubleshooting bluetooth connectivity in car. Cause the front control display interface module (touchscreen) has no effect on bluetooth connectivity in the car and as such may be incorrectly diagnosed and replaced as the source of the issue"
• 10204808Sep 25, 2014Body and structure. Technical Bulletin: Front / Rear Bumper Harness Protective Sleeve
• 10102185Sep 25, 2014Brakes, Electrical system. "situation: the front and/or rear parking aid system may be inoperative. Cause: this may be caused by a corroded wiring harness at the front and/or rear bumper harnesses."
• 10224549Sep 24, 2014Exterior lighting. Technical Bulletin: Tail Lamp Condensation
• 10214071Sep 24, 2014Electrical system. Technical Bulletin: Tail Lamp Condensation
• 10102130Sep 24, 2014Exterior lighting. "situation: the tail lamps may exhibit condensation or 'misting' which will not easily clear. Cause: this may be caused by the design of the tail lamp assembly allowing moisture to settle on the inside of the lamp lens."
• 10102431Sep 23, 2014Electrical system, Equipment. "issue customers might be experiencing an issue with iphones 6 and 6plus, as well as iphones that have been updated to ios8. The issue is common across all manufacturers symptoms when the apple device is connected to the car system and a call is received there is no option to answer or reject the incoming call on the system. The steering wheel controls also have no effect. The touch screen continues to display the…
• 10204832Sep 12, 2014Exterior lighting. Technical Bulletin: Front/Rear Lamp Condensation- Information Only
• 10102242Sep 12, 2014Exterior lighting. "situation: condensation / mist may appear on the inside of front and/or rear exterior lamps. Cause: condensation/mist is a natural phenomenon which can occur when there is a temperature difference between the inside and outside of the lamp unit. This condensation is considered to be as a result of normal atmospheric conditions and replacing the light unit will not correct this symptom.
• 10102382Sep 11, 2014Electrical system. "****this issue has been resolved.**** ltb00587 is now live on topix concern a customer may report a momentary switch off of power to the headlamps, instrument cluster, and touch screen all at the same time accompanied by a ""clicking"" noise specifically from the interior fuse box location by the glove box. All systems operate normally thereafter without any other customer symptoms or fault codes."
• 10102125Sep 9, 2014Transmission and drivetrain. "situation: the transmission oil cooler pipe(s) may exhibit a leak. Cause: this may be caused by poor bracket paint finish and / or low torque on the saddle clamp nut, allowing the piped to rub through the paint."
• 10070746Sep 9, 2014Engine. Summary to be provided on a future date.
• 10224503Sep 2, 2014Suspension, Electronic stability control. Technical Bulletin: Air Suspension Compressfor Replacement
• 10214025Sep 2, 2014Electronic stability control, Suspension. Technical Bulletin: Air Suspension Compressfor Replacement
• 10102127Sep 2, 2014Suspension. "situation: the air suspension warning lamp may be illuminated, the air suspension may fail to raise the vehicle, and diagnostic trouble code (dtc) c1a20-64 may be stored. Vehicles within the above vin ranges have been fitted with either a hitachi or an old-design amk suspension compressor."
• 10102101Aug 26, 2014Equipment. "issue: discoloration or peeling of the front or rear land rover or range rover badge"
• 10102003Aug 26, 2014Equipment. "issue: land rover engineering have been monitoring reports for lack of cooling from the air conditioning system on higher time in service vehicles, where insufficient performance of the air conditioning compressor has been found to be the root cause of the issue. Compressor part no. Lr010723 & lr013934"
• 10102063Aug 15, 2014Steering. "issue: when investigating a customer reported steering issue it is found that there is oil/fluid present around the steering gear input shaft. Cause: oil or grease leak past input shaft seal through normal use or seal failure."
• 10224476Aug 5, 2014Suspension, Lane departure, Electronic stability control. Technical Bulletin: Suspension Warning Lamp Illuminated - Diagnostic & Repair Procedure
• 10213998Aug 5, 2014Suspension. Technical Bulletin: Suspension Warning Lamp Illuminated - Diagnostic & Repair Procedure
• 10204818Aug 5, 2014Visibility (wipers, defrost, mirrors). Technical Bulletin: Door Mirror Judders During Powerfold Operation
• 10101886Aug 5, 2014Visibility (wipers, defrost, mirrors), Body and structure. "situation: the door mirror may 'judder' during powerfold (manual or automatic) operation. Cause: this may be caused by a tolerance stack-up between the door mirror and the door."
• 10101861Aug 5, 2014Electrical system, Equipment. "situation: the dynamic response system red warning lamp may be illuminated on the instrument cluster and diagnostic trouble codes (dtc) c1119-62, c1119-09, and/or c1b11-62 may be stored, possibly indicating system contamination. This technical bulletin provides a process for retailers to correctly diagnose dynamic response system contamination, to identify if an actuator has failed, and to determine which parts…
• 10101681Jul 29, 2014Electrical system, Equipment. "issue: the touch screen display (tsd) also known as front control display interface module (fcdim) or high level display front (hldf) on occasions may fail to download software correctly resulting in no communications with the module and blank screen. Cause: this may be as a result of low battery voltage or a break in continuity of diagnostic connection during the download"
• 10204852Jul 25, 2014Electrical system. Technical Bulletin: Emissions Recall: Engine Malfunction Indicator Lamp Illuminated
• 10064828Jul 25, 2014Engine. Summary to be provided on a future date.
• 10101804Jul 17, 2014Electrical system. "issue a number of alternators are being replaced under warranty and are found to be faulty due to internal regulator chip damage. Cause alternators are being damaged due to cross polarity when the vehicle is jump started."
• 10101721Jul 11, 2014Transmission and drivetrain. "issue: brake noise from front axle (with brembo brakes only) cause: under investigation"
• 10101802Jul 3, 2014Equipment. "issue: customer complaint of noise from facia when travelling over certain road conditions. Cause: jlr engineering have found during their investigations that the instrument panel upper section speaker aperture bolt may have a relaxed torque (see topix workshop manual section 76.46.04 fig. E12471)"
• 10101762Jul 1, 2014Engine. "issue: customers report a repeat issue of engine noise from the timing chain system, after the vehicle had previously been repaired. Cause: the timing chain was not at the correct tension. This was caused by the full repair procedure in tsb ltb00474 not being followed - a complete set of timing chain tensioners and blades were not fitted."
• 10239285Jun 18, 2014Suspension. A customer may complain that either "Vehicle Raising In Progress" or "Suspension Will Rise When System Is Cooled" messages can be seen. Fault codes U210A - 16 and C1A24 - 67 may also be stored.
• 10242161Jun 13, 2014Engine cooling. ?Rattle? / ?Click? Noise from Front of Engine
• 10239286Jun 13, 2014Body and structure. This SSM applies to Instrument Pack lens in the above applicable model years vehicles.

← All problems reported for the 2010 Land Rover Range Rover Sport